The Original CZ Forum

CZ PISTOL CLUBS => CZ SP-01 and variants => Topic started by: andreask1970 on July 17, 2007, 02:27:24 PM

Title: DPM Recoil System
Post by: andreask1970 on July 17, 2007, 02:27:24 PM

Hello,

I've tried to install the DPM Recoil System on my SP-01. But I can't manage to fit it through the hole for the recoil spring. It simply won't fit. Anyone a tip or trick for me how to install it.

Best regards
Andreas

Title: DPM Recoil System
Post by: Pauly L on July 17, 2007, 04:15:05 PM

Hi Andreas,

You will need to get a new recoil spring, the standard one is tapered at one end to grip onto the plastic guide rod. Would suggest the 11lb one unless shooting +P ammo, 14lb if you are

Rgds
Paul

Title: DPM Recoil System
Post by: andreask1970 on July 17, 2007, 04:49:46 PM

Hi,

There're 2 springs dilivered with the system. Have also a 11 lbs and a 14 lbs spring from angus. The thing is, that the system seems to be too big to fit in the slide.

Best regards
Andreas

Title: DPM Recoil System
Post by: Jeroenw114 on July 18, 2007, 04:39:08 AM

Try to install the guiderod firts, pull it out trough the front of the slide and than the barrel.
That is the way I put my flgr in my CZ 75 SA, might work for you ?

Jeroen

Title: DPM Recoil System
Post by: andreask1970 on July 18, 2007, 10:42:18 AM

Jeroen,

no way, when the recoil system is in, the barrel won't fit.

Andreas

Title: DPM Recoil System
Post by: esper1000 on August 07, 2007, 01:47:59 PM

Ever get this to work?

Title: DPM Recoil System
Post by: amc31b on August 16, 2007, 10:05:13 AM

I have the DPM recoil reducer in my P-01. It works just as advertised and I love it. If everything doesnt drop right in, send it back. There is no fitting or anything else required. www.theshootersbox.com Is where you ordered it from correct? When I ordered from them it took 6 weeks because they had a mix up in springs and guide rods for the CZ systems. You may have gotten a bad one.

Title: DPM Recoil System
Post by: alexander80 on August 17, 2007, 04:37:16 AM

i have DPM reckoil bufer on my sp-01 and it is work great with him - groups of points are smaller and results are very good

Title: DPM Recoil System
Post by: andreask1970 on August 28, 2007, 12:00:47 AM

Hi,

now it works for me too. If it won't fit on the barrel, you have to pull the golden spring backwards. Then it fits perfectly. Today I'm going to the range to try it.

Title: DPM Recoil System
Post by: alexander80 on August 28, 2007, 11:05:26 PM

Try it and when you are familiar with it you will be happy

Title: DPM Recoil System
Post by: andreask1970 on August 29, 2007, 12:40:37 PM

Yesterday I shot Fiocchi and Geco 124 grs FMJ. Realy less recoil. You are faster back on the target. Shoots awsome!