The Original CZ Forum

CZ PISTOL CLUBS => CZ SP-01 and variants => Topic started by: lvog57 on January 28, 2006, 08:34:49 AM

Title: Ammo
Post by: lvog57 on January 28, 2006, 08:34:49 AM

I am trying to find the perfect load for IPSC. I use Hornady 115gr FMJ bullets. I am very interested to get some feedback from you guys.

Do you feel a big difference between 115gr and 124gr ?
What powder is the best choice for the 9mm ? I use Winchester 231 and Bullsey. If have tried some loads with TiteGroup.

I will post details as soon I 'll have some time to complete the tests (My chrono is out of order)

Title: Ammo
Post by: atblis on February 02, 2006, 03:25:17 PM

You might try power pistol from Alliant (supposedly just a tweaked version of Bullseye).  It makes good velocity, and has proven accurate, and consistant with minimal effort.

Title: Ammo
Post by: Stuart on February 02, 2006, 06:34:22 PM

couple of powders that seem to be used a lot are Viht N320 and Tightgroup..

I am getting ready to try some N320 loads with 124CMJ and 124JHP bullets..otherwise I tend to shoot WWB ammo..

Title: Ammo
Post by: Miossi Gun Works on February 03, 2006, 03:12:11 PM

Pistol Powder is good for the 124 jacketed loads but Accurate Arms #7 will get you higher velocities and is a bit cleaner burning and easier more consistent metering in a Dillon powder measure. Charge weights run from 7.0grs to 8.0grs for 1200fps. AA#5 is also a god choice if you have that with charge weights from 5.4grt to 6.4grs for a bit over 1230fps at max loads.

Jim

Miossi Gun Works LLC
702 Park Dr
Monticello, IA 52310

Title: Ammo
Post by: atblis on February 04, 2006, 12:28:18 PM

I've got some IMR7625 (Happened into 48lbs of it)  I've been playing with.  It meters extremely well.  Works pretty good for the 9x23.  I have not tried it for the 9x19.  I don't know what it'll do velocity wise in the 9x19, but it does meter extremely well.