The Original CZ Forum
CZ LONG ARMS => CZF RIMFIRES => Topic started by: JSC_Liason_Neo on September 03, 2015, 08:48:31 PM
-
Welcome from Australia
Im soon to get a CZ 452 American (Its called "Special" here)
What are difference in the stocks? I would like to replace it with a Boyds Ss Evolution. Will it work?
Its a 452 E ZKM receiver
Boyds dont make the Evolution for the 452 but they do for the 452 2e
-
Sorry I can't answer your questions, but welcome to the forum from Virginia. - Bodene
-
Do not know either..... but welcome as well.
-
Welcome.
It will fit if yours is 22LR with a tapered barrel. All of Boyds stocks are based on the 'American' action with 2 action screws. If you had a Lux or Trainer it wouldn't be a drop in.
-
i was able to get this from Boyds
I only have the dimensions for the 452 2E.
Barrel Dimensions: Point A = 099" and Point B = .78855"
(Point A- Where your barrel meets your receiver. Point B- 9" down from A and you measure across.)
Center to Center of Action Screws: 6.6"
haven't been enable to find details of the 452 e
-
got this for one of my local shops
Usually these stocks will fit, though sometime they require a little bit of
inletting to get a good fit. They no longer have the barrel screw in them,
but often the stock has allowances for this.
-
got this for one of my local shops
Usually these stocks will fit, though sometime they require a little bit of
inletting to get a good fit. They no longer have the barrel screw in them,
but often the stock has allowances for this.
That's fine because no CZ 452 American action uses a barrel screw.