The Original CZ Forum
CZ LONG ARMS => CZF RIMFIRES => Topic started by: Riptide439 on March 30, 2016, 08:00:51 PM
-
Time to start the 2017 Online Fun Matches. Anyone with a rimfire is welcome to shoot. Here are the basic rules:
1. 2 Matches per month
a. Iron Sights
b. Scoped
2. Print out the posted target each month
3. Follow that months match rules for shot quantity and distance
4. Shoot - Shoot - Shoot that target
5. Score your target as per monthly rules and print your score on the target
6. When you are finished, take a photo of your target and post the target on the monthly match post
7. Scores will be tallied at the end of each month
Winnings per Month....A whole bunch of "Nice Shooting", "Atta Way", "Boy do I Stink!"
This monthly match is all about getting to the range and having fun.
Let's get this going everyone!
-
Looking forward to it!
-
Checked out the targets for this month, looks like this will be a lot of fun. Thanks for putting this together
-
Hoping to be able to participate allot this year, but I hope I'm not a full year out of the loop. 2017 starts next year, right??? ;)
-
Hoping to be able to participate allot this year, but I hope I'm not a full year out of the loop. 2017 starts next year, right??? ;)
Not for Rip... ;D
-
Hoping to be able to participate allot this year, but I hope I'm not a full year out of the loop. 2017 starts next year, right??? ;)
Not for Rip... ;D
It's not 2017? :o
-
Hoping to be able to participate allot this year, but I hope I'm not a full year out of the loop. 2017 starts next year, right??? ;)
Not for Rip... ;D
It's not 2017? :o
Just wait, it will be.
-
Rip.....On target #1 for both irons and scoped what is the size of the black bull supposed to be.....Last year some of my targets printed different scale from other folks so I want to get the correct size. Thanks!
-
Darn! I didn't realize this was for rimfire rifles. Oh well.
-
Rip.....On target #1 for both irons and scoped what is the size of the black bull supposed to be.....Last year some of my targets printed different scale from other folks so I want to get the correct size. Thanks!
d
If you use 8-1/2 x 11 paper and select "Fit to Page" they should all be very close
-
Rip.....On target #1 for both irons and scoped what is the size of the black bull supposed to be.....Last year some of my targets printed different scale from other folks so I want to get the correct size. Thanks!
d
If you use 8-1/2 x 11 paper and select "Fit to Page" they should all be very close
The whole target should print without clipping off the 6 ring...right?
-
My printer does not have a "fit to page" setting. My target printed out a 3 1/4 inch black bullseye with a 5/8" center ring.
How did you guys' turn out?
-
Rip.....On target #1 for both irons and scoped what is the size of the black bull supposed to be.....Last year some of my targets printed different scale from other folks so I want to get the correct size. Thanks!
d
If you use 8-1/2 x 11 paper and select "Fit to Page" they should all be very close
The whole target should print without clipping off the 6 ring...right?
Yes....exactly painter
-
My target printed with a red x ring, including the white boundary, at roughly 15/16" with a gray 10 ring at 1 9/16".
Yours sounds smaller than the way mine printed Rimfire.
-
Painter........Mine seems to be smaller, no red x ring , no gray 10 ring....see mine below. Can you post yours?
(http://i1380.photobucket.com/albums/ah182/Rimfire7/Blank%20trget_zps6sxnevge.jpg)
-
Painter........Mine seems to be smaller, no red x ring , no gray 10 ring....see mine below. Can you post yours?
(http://i1380.photobucket.com/albums/ah182/Rimfire7/Blank%20trget_zps6sxnevge.jpg)
I'm out of town until the weekend. I will when I get home.
-
This is what mine looks like printed...
(https://farm2.staticflickr.com/1447/26303161316_543667877c_b.jpg)
-
Thanks..Painter....yours is not like mine for sure. Rip.....What does your target look like printed up? Strange these would be different?
-
My target looks like your Rimfire. no red center. Over all diameter is 6".
Center black portion is 3-5/8" diameter
-
My target looks like your Rimfire. no red center. Over all diameter is 6".
Center black portion is 3-5/8" diameter
I guess I'll try again. :-\
eta...
OK, I figured it out. If you print directly from the browser it prints smaller. If you save the image it prints larger as in my photo. Not sure why, but that's what happened.
I'll just print it directly.