The Original CZ Forum
CZ PISTOL CLUBS => Compact CZ 75s => Topic started by: 2tango2 on April 14, 2016, 09:38:51 PM
-
In the Zebra pattern.....something different [emoji3]
Anyone else running VZ Zebras? Thoughts?
Can I just use the factory screw?
Sent from my iPhone using Tapatalk
-
I am thinking about the Frag in desert/black. Anxious to see if someone here has an opinion on the Frag grips.
-
I just put a set on my Pcr & they look & feel great
Sent from my iPhone using Tapatalk
-
(http://uploads.tapatalk-cdn.com/20160416/2866263e5ecce59f3527fc864c693bd8.jpg)
Sent from my iPhone using Tapatalk
-
(http://uploads.tapatalk-cdn.com/20160416/2866263e5ecce59f3527fc864c693bd8.jpg)
Sent from my iPhone using Tapatalk
Thanks!!
-
Thanks for the pictures. I am planning on ordering a set soon, trying to decide on color. Leaning towards Black/Desert Sand.
-
(http://uploads.tapatalk-cdn.com/20160502/d404695ad2912aa7e07a82596953baa8.jpg)
Sent from my iPhone using Tapatalk
-
I just installed a set on my 75C. They look fantastic and offer just the right amount grip...especially for carry. I noted that when I first installed them, I tightened the grip screws to the point that the mags would not drop. Anyone else have that issue?
-
I just installed a set on my 75C. They look fantastic and offer just the right amount grip...especially for carry. I noted that when I first installed them, I tightened the grip screws to the point that the mags would not drop. Anyone else have that issue?
Maybe a washer or small o ring needed??
-
I just ordered a set of VZ diamond tactical grip black and gray pattern on Ebay for $50 shipped and new in the box. Some people has said that pattern is a bit too grippy but I will have to se. That prices was too good to pass up. If they don't work out then they go on the trader I guess.
-
I just installed a set on my 75C. They look fantastic and offer just the right amount grip...especially for carry. I noted that when I first installed them, I tightened the grip screws to the point that the mags would not drop. Anyone else have that issue?
Maybe a washer or small o ring needed??
Hey when I installed mine I didn't have any issues with mag release and they fit pretty snug
-
I did use the rubber o rings that came with the grips, on my first install. I took the panels off and re-installed them, making sure they weren' "farmer tight". The mag seems to drop freely now...but will have to hit the range to make sure the issue is resolved. I did send LOK an email regarding my problem, and they responded right away with an offer to send another set of panels and a shipping envelop for the return of my current set. I let them know I appreciated their quick response and offer, but hopfully had resolved the probelm.
-
I just installed a set on my 75C. They look fantastic and offer just the right amount grip...especially for carry. I noted that when I first installed them, I tightened the grip screws to the point that the mags would not drop. Anyone else have that issue?
Maybe a washer or small o ring needed??
Hey when I installed mine I didn't have any issues with mag release and they fit pretty snug
Maybe VZ vs Lok? Did the VZs come with any washers or rubber O rings or did you just use OEM screw?
Then again I'm assuming you have VZs?
-
I just installed a set on my 75C. They look fantastic and offer just the right amount grip...especially for carry. I noted that when I first installed them, I tightened the grip screws to the point that the mags would not drop. Anyone else have that issue?
Maybe a washer or small o ring needed??
Hey when I installed mine I didn't have any issues with mag release and they fit pretty snug
Maybe VZ vs Lok? Did the VZs come with any washers or rubber O rings or did you just use OEM screw?
Then again I'm assuming you have VZs?
With the vz I used the original screws they only came with the panels no oring or washers
-
(https://photos.google.com/photo/AF1QipMm0EedWcBeRTnuTgjIj64WJ3IKxkJMbSt3ACWK)I thought the frag pattern wouldn't offer enough grip. It offers just the right amount of grip! I don't need to try the diamond pattern. I have the solid black, but I'd trade straight up for the black and gray zebra.
And I used the original grip screws.
-
I really like the Zebra look, so I tried these from LOK and they come with o-rings which was nice
(http://i1272.photobucket.com/albums/y394/stromburg66/Mobile%20Uploads/image_zpsdumincpj.jpg) (http://s1272.photobucket.com/user/stromburg66/media/Mobile%20Uploads/image_zpsdumincpj.jpg.html)
-
Found these on Ebay. Had Talon Grips on and just cut the side panels off. Used the stock screws. They fit real nice.
(http://i41.photobucket.com/albums/e260/jackinil/DSC00790_zpsv0muwey1.jpg) (http://s41.photobucket.com/user/jackinil/media/DSC00790_zpsv0muwey1.jpg.html)