The Original CZ Forum

CZ PISTOL CLUBS => CZF KADET KLUB => Topic started by: ezcz on April 23, 2002, 01:16:29 PM

Title: Metal recoil spring guide rod
Post by: ezcz on April 23, 2002, 01:16:29 PM

After I broke the edge off the nail head portion of the plastic guide rod I made a new metal one.  The length must be EXACT!  Make it a little long and use a file and/or 600 grit paper to get it right.  The kit functions flawlessly.

Title: Metal recoil spring guide rod
Post by: Hakan on April 25, 2002, 04:12:26 PM

Hi ezcz,
           
            How did you make it? what kind of metal was it?do you have any pics of it?
           
            Thanks.
           
            Hakan.

Title: Metal recoil spring guide rod
Post by: ezcz on April 25, 2002, 07:18:56 PM

I made it out of brass so I could easily modify it as necessary. The next i will make out of Stainless tool steel.  I have access to a complete machine shop so I can make nearly anything.
            A double headed nail, the kind used for temporary assemble would work nicely.  Remove the one head and make the nub fit the recess in the barrel, trim to length and using a file and 600 grit paper get it to function correctly.  You could heat treat it if you thought that might be necessary.  I don't have a picture and have no way of posting it if I did.