The Original CZ Forum

CZ LONG ARMS => CZ Scorpion EVO => Topic started by: wbpo5l on February 28, 2017, 12:58:15 PM

Title: ATI Pistol Tube and CAA Cheek Weld Saddle
Post by: wbpo5l on February 28, 2017, 12:58:15 PM: Very comfortable and practical for what it is.

(http://i1126.photobucket.com/albums/l611/wbpo5l/20170228_091042_zpsd6b9bazj.jpg)

(http://i1126.photobucket.com/albums/l611/wbpo5l/20170228_091022_zpstqm96ple.jpg)
Title: Re: ATI Pistol Tube and CAA Cheek Weld Saddle
Post by: excalibur on March 01, 2017, 09:40:24 AM: I had this for a while ever since I bought mine but just recently, I ditched for the new SBT folding brace thingy and that one feels a whole lot better than this thing.
Title: Re: ATI Pistol Tube and CAA Cheek Weld Saddle
Post by: wbpo5l on March 01, 2017, 11:35:50 AM: Can you be specific about what feels better. I'm seriously thinking about going that route but not unless there is a real difference.
Title: Re: ATI Pistol Tube and CAA Cheek Weld Saddle
Post by: excalibur on March 01, 2017, 05:01:36 PM: The SBT folding brace thingy actually feels and looks like a stock for its intended purpose. It's slimmer than the CAA cheek piece and of course it folds. It holds up very good under fire as far as I can tell and can even be fired folded without blocking the brass ejection.
Title: Re: ATI Pistol Tube and CAA Cheek Weld Saddle
Post by: Pachucko on March 03, 2017, 03:28:06 PM: Quote from: excalibur on March 01, 2017, 09:40:24 AM
I had this for a while ever since I bought mine but just recently, I ditched for the new SBT folding brace thingy and that one feels a whole lot better than this thing.
You can souvenir it to me. :)

Sent from my iPhone using Tapatalk
Title: Re: ATI Pistol Tube and CAA Cheek Weld Saddle
Post by: wbpo5l on March 05, 2017, 01:40:33 PM: Shot it yesterday. Worked just fine. Definitely better than without. Of course the best is getting your stamp and doing a stock. During the 100 day wait, this works.
Title: Re: ATI Pistol Tube and CAA Cheek Weld Saddle
Post by: TITAN308 on March 05, 2017, 03:58:37 PM: Quote from: wbpo5l
During the 100 day wait...

lol who gave you that quote?
Title: Re: ATI Pistol Tube and CAA Cheek Weld Saddle
Post by: lorazepam on March 05, 2017, 06:49:01 PM: More like 300 day wait.
Title: Re: ATI Pistol Tube and CAA Cheek Weld Saddle
Post by: TITAN308 on March 05, 2017, 06:52:47 PM: Quote from: lorazepam on March 05, 2017, 06:49:01 PM
More like 300 day wait.

Just wait until they actually hit the July 13th submission time frame (they are currently still processing mostly end of May and some beginning of June).

Silencershop alone sent in the below right before the deadline (remember as long as post dated prior good to go):

(http://www.thefirearmblog.com/blog/wp-content/uploads/2016/07/image-52-660x355.jpeg)

Quote
Pictured is over 100 Boxes weighting about 12-14 lbs each, estimated at a total of 1200lbs.

This is twice the size of the largest number of form 4?s sent in one day in the history of the ATF for the entire country.

$2M+ is the largest amount of revenue that the ATF has received at one time (even though the money doesn?t go to them).

This is more form 4?s than the entire year for 1998 (as reported in the 2015 ATF report).