The Original CZ Forum

CZ LONG ARMS => CZ Scorpion EVO => Topic started by: jason.luster.50 on March 02, 2017, 04:30:21 PM

Title: Manticore slidingstock issue
Post by: jason.luster.50 on March 02, 2017, 04:30:21 PM: I finally got my stamp back and shot the scorpion for the firsttime with the sliding stock and every few shots it would collapse by a notch or 2 anybody else had this problem? Any suggestions

Sent from my VS987 using Tapatalk
Title: Re: Manticore slidingstock issue
Post by: akuser47 on March 02, 2017, 08:31:53 PM: Contact them or have you even contacted them. Sven will make it right. No worries. keep us posted
Title: Re: Manticore slidingstock issue
Post by: Arachnid on March 02, 2017, 11:28:32 PM: See the bottom of this thread:
http://www.czfirearms.us/index.php?topic=85247.msg648420#msg648420
You're in good hands.
Title: Re: Manticore slidingstock issue
Post by: Manticore_Arms on March 03, 2017, 02:31:57 PM: Jason,

Send an email to info@manticorearms.com with your full contact info and describing the issue.

We had a few springs from our soring manufacturer that were out if spec and can cause that issue. We will send you a replacement stock and a retirn labelfor your current stock.

Sven
Manticore Arms
Title: Re: Manticore slidingstock issue
Post by: cocowheats on March 03, 2017, 02:34:47 PM: Quote from: Arachnid on March 02, 2017, 11:28:32 PM
See the bottom of this thread:
http://www.czfirearms.us/index.php?topic=85247.msg648420#msg648420
You're in good hands.

Yup, that was me with the same issue.

They had a bad batch of springs that got used in one of the early runs/batches. Mine got to the point where I could slap it with my hand and it would collapse.

I simply contacted Sven via email and he got a new stock sent out to me with a shipping label within the box so I could just drop the problematic stock in the same box, swap out shipping labels, and ship it back.

Manticore will take of you. My replacement has a couple thousand rounds on it with no issues. I am mostly pleased with how it was handled and am happy with my replacement.

EDIT: I guess Sven was typing at the same time as me and beat me...
Title: Re: Manticore slidingstock issue
Post by: Manticore_Arms on March 03, 2017, 04:28:22 PM: Not only was i typing at the same time, I was doing it from my hotel room inGermany while I am at IWA ... How is *that* for customer service? 😉
Title: Re: Manticore slidingstock issue
Post by: akuser47 on March 03, 2017, 05:26:58 PM: I didn't expect any less out of Manticore and Sven.
Title: Re: Manticore slidingstock issue
Post by: jason.luster.50 on March 08, 2017, 08:18:49 PM: Thanks to great service from manticore my scorpion is back together and ready to go the new stock has a noticably stiffer spring than the one I took off so I don't for see having this problem again

Sent from my VS987 using Tapatalk
Title: Re: Manticore slidingstock issue
Post by: akuser47 on March 08, 2017, 09:27:57 PM: Nice thanks for keeping us posted
Title: Re: Manticore slidingstock issue
Post by: Manticore_Arms on March 09, 2017, 05:38:55 AM: Quote from: jason.luster.50 on March 08, 2017, 08:18:49 PM
Thanks to great service from manticore my scorpion is back together and ready to go the new stock has a noticably stiffer spring than the one I took off so I don't for see having this problem again

Sent from my VS987 using Tapatalk

Glad to know my people were able to take care of you while I am halfway around the world! ;)

Sven
Manticore Arms