The Original CZ Forum

CZ LONG ARMS => CZ Scorpion EVO => Topic started by: Buckshot Barry on April 24, 2017, 05:06:02 PM

Title: PMM rear sling mount durability
Post by: Buckshot Barry on April 24, 2017, 05:06:02 PM
My PMM rear sling mount arrived today. The quality looks great.

http://www.parkermountainmachine.com/store/p100/CZ_Scorpion_EVO_3_S1_Rear__QD__Sling_Mount.html (http://www.parkermountainmachine.com/store/p100/CZ_Scorpion_EVO_3_S1_Rear__QD__Sling_Mount.html)

I plan on running and gunning under the clock with my Scorpion Carbine and my club requires a single point sling where the muzzle points straight down, so I should be good to go.

What concerns me is the small diameter of the screw. Will it hold up and has anyone had one break?

Thanks
Title: Re: PMM rear sling mount durability
Post by: SouthernScorp on April 24, 2017, 05:49:02 PM
110% reliable. Carried my scorpion for many miles already and the QD mounts are still as secure as day 1.
Title: Re: PMM rear sling mount durability
Post by: Buckshot Barry on April 24, 2017, 08:08:02 PM
Thank you. I sent the same question directly to PMM. If they reply differently I'll post.

Tuesday may be my lucky day if my Scorpion arrives at my dealer in time. I am SO pumped.
Title: Re: PMM rear sling mount durability
Post by: Asmodeus on April 25, 2017, 01:02:04 PM
The durability of the housing it bolts through would be the limiting factor.  The mount is solid and tight.  I was impressed with it when it came.
Title: Re: PMM rear sling mount durability
Post by: Buckshot Barry on April 25, 2017, 01:25:31 PM
Got a reply from Jarod at PMM

"that small M3 bolt has a single sheer load of 700 lbs it will be fine.you will break the plastic tang off the gun prior to the bolt or mount failing."

I am good to go!