The Original CZ Forum

CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: vern56 on June 30, 2017, 09:31:26 PM

Title: P10 disasembly issue?
Post by: vern56 on June 30, 2017, 09:31:26 PM: Took my P10 down when I first got it to clean and lube. Followed directions and it came apart easy enough.
Fired about 150 rounds through it but now I can't get the slide off. Goes just past the mag well but then is hanging up on something. Don't want to force it. Tried lifting, pushing down, wiggling.

Any thoughts?
Title: Re: P10 disasembly issue?
Post by: Mjolnir on June 30, 2017, 09:32:46 PM: Have you pressed the trigger before going thru the disassembly procedures - like one would do with a Glock?

Sent from my iPhone using Tapatalk
Title: Re: P10 disasembly issue?
Post by: DOC 1500 on June 30, 2017, 10:27:29 PM: Quote from: Mjolnir on June 30, 2017, 09:32:46 PM
Have you pressed the trigger before going thru the disassembly procedures - like one would do with a Glock?

Sent from my iPhone using Tapatalk
^^^^^ that's what I was thinking
Title: Re: P10 disasembly issue?
Post by: JConnor93 on June 30, 2017, 11:22:17 PM: Quote from: vern56 on June 30, 2017, 09:31:26 PM
Took my P10 down when I first got it to clean and lube. Followed directions and it came apart easy enough.
Fired about 150 rounds through it but now I can't get the slide off. Goes just past the mag well but then is hanging up on something. Don't want to force it. Tried lifting, pushing down, wiggling.

Any thoughts?

When I first took mine apart, I had to have the trigger pressed before I slid the slide back and hit the take down lever.
Title: Re: P10 disasembly issue?
Post by: vern56 on June 30, 2017, 11:31:13 PM: Yes, ala glock.
Title: Re: P10 disasembly issue?
Post by: Joe L on July 01, 2017, 07:11:28 AM: I had that happen when I left an empty magazine in the frame. Just a thought from someone that should have known better.

Joe
Title: Re: P10 disasembly issue?
Post by: vern56 on July 03, 2017, 09:38:16 PM: Contacted CZ. Very quick response. They surmise that one of the slide lock lever spring legs came out from underneath the block. Very promptly sent a return label and it will be on its way on Wednesday.
Title: Re: P10 disasembly issue?
Post by: flattusmaximus78 on July 04, 2017, 08:17:39 AM: I was putting the slide back on ones and hit something and reset the trigger and didn't notice, locked that thing up. I was impressed with myself.
Title: Re: P10 disasembly issue?
Post by: Chasam on July 07, 2017, 09:22:23 AM: Just had the same thing happen to me,called CZ,Cory, was most helpful.Pistol is on it's way to CZ.After looking at the schematic of the pistol and watching the video on the detail stripping of the weapon,I wonder if this is going to be the achellies heal of this model.I'll wait and see.
Title: Re: P10 disasembly issue?
Post by: vern56 on July 07, 2017, 05:43:08 PM: Hope not.
After just a little shooting, I really want to love this gun. Shot it so much better than the 19.
Title: Re: P10 disasembly issue?
Post by: Chasam on July 11, 2017, 12:26:25 PM: Just to update my experience,received an E mail this a.m.stating that the gun will have to be replaced,4 to 6 weeks time frame possibily longer depending upon inventory.
Title: Re: P10 disasembly issue?
Post by: walker2713 on July 11, 2017, 12:33:13 PM: How do you say Bummer! in Czech? :'(
Title: Re: P10 disasembly issue?
Post by: vern56 on July 11, 2017, 04:34:00 PM: Same here.
First email said repair was complete, just the slide lever release spring.
Another email about 10 minutes later, replacing the gun, but subject to availability.
Next day email (monday) said it had been shipped and it arrived today. ?
Title: Re: P10 disasembly issue?
Post by: Chasam on August 02, 2017, 05:28:47 PM: Just received my replacement pistol today,looking forward to range time.
Title: Re: P10 disasembly issue?
Post by: Mjolnir on August 02, 2017, 07:36:07 PM: Okay, so the problem is what, exactly??

[emoji51]

Sent from my iPhone using Tapatalk
Title: Re: P10 disasembly issue?
Post by: Chasam on August 04, 2017, 04:07:32 PM: Check,Vern 56 's reply prior to my post,same culprit.
Title: Update Re: P10 disasembly issue?
Post by: Chasam on August 10, 2017, 02:44:01 PM: Finally got to the range today,pu 250 rds .through my new pistol without a problem,It took 4weeks to the day but all seems well.