The Original CZ Forum
CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: oldfrank on August 29, 2017, 04:14:23 PM
-
https://hbindustries.net/store/shop/cz-p10-theta-trigger-kit/
I don't know anything about this. They are saying it will reduce pretravel and can also lighten trigger pull with two included, different weight striker springs.
Somebody be the Guinea Pig!
-
https://hbindustries.net/store/shop/cz-p10-theta-trigger-kit/
I don't know anything about this. They are saying it will reduce pretravel and can also lighten trigger pull with two included, different weight striker springs.
Somebody be the Guinea Pig!
Just ordered one in black. Heading out of town tomorrow so I won't get to play with it until Sunday. :(
-
Just finished watching the HB industries install video. Seems like a great upgrade. I'll be interested in hearing from other members who will buy one and install it. For me I'm just leaving my P10c stock. I have 4300 rounds through mine and the trigger is very smooth.
rich63
-
Its a nice trigger. I like the release of the safety bar better than the factory. There are two striker springs that come with the kit. so you can tune to how you like the trigger feel.
(http://i.imgur.com/e0MvSWp.jpg?1)
-
Looks like a nice trigger. The p-10 does have a lot of pre travel in the trigger so I'm sure this is a decent upgrade. But in hindsight David from CGW is a miracle worker with CZs and I am sure what he is going to release for the p-10 will be nothing short of amazing. So I will hold out and wait for those parts.
-
Just ordered the tungsten theta trigger
-
That's a great picture. 8)
-
Can't wait to hear a good, detailed review. I am a big fan of flat metal trigger shoes.
-
I got tungsten in Thursday. Good looking trigger. Hope to get a little range time this evening. They're very well made from my examination.
(https://uploads.tapatalk-cdn.com/20170916/305f07bcd1878710aca35f66d6908583.jpg)(https://uploads.tapatalk-cdn.com/20170916/2219aaaaecfe4b7df5003eca2336a449.jpg)
Sent from my SAMSUNG-SM-G930A using Tapatalk
-
Can't wait to hear a good, detailed review. I am a big fan of flat metal trigger shoes.
I did a write up of my first trigger with an update after getting my second one.
http://minivandoorgunner.blogspot.com/2017/09/cz-p-10c-hb-industries-theta-flat.html (http://minivandoorgunner.blogspot.com/2017/09/cz-p-10c-hb-industries-theta-flat.html)
-
I was momentarily bummed when a friend of mine said the factory trigger resembles an upside down duck. Now, for whatever reason, I have come to opine that the above pictured new trigger resembles either an upside down eagle, sea gull, or maybe an albatross. ;D
-
I was momentarily bummed when a friend of mine said the factory trigger resembles an upside down duck. Now, for whatever reason, I have come to opine that the above pictured new trigger resembles either an upside down eagle, sea gull, or maybe an albatross. ;D
(http://cdn.images.express.co.uk/img/dynamic/80/590x/Monster-635042.jpg)
-
Doh! Let the nightmares begin! ;D
-
I installed my orange one and 3.0# spring last night. Extremely easy job especially with the correct size roll punch starter. Put 150 rounds through the gun today and found it to be a significant improvement over the stock trigger.
-
What is the correct size roll punch starter?
-
Ummmm, whatever fits in the hole without touching the sides.. sorry I'm a b@ll buster :)
-
The new trigger looks good, I do like flat triggers.
-
Hey Doc...tough guys don't have to act tough...they just are.
-
Ummmm, whatever fits in the hole without touching the sides.. sorry I'm a b@ll buster :)
OK, now that's kind of funny....almost spit some Bud Light on my computer.....
-
Precision counts, if it's worth doing, it's worth doing right. The blunt end of a drill bit has a very sharp 90 deg edge and if the bit is not kept perpendicular to the hole could wobble It out of round.
-
Just installed the blue one with 3.5 lb spring. Everything looks good & feels great but I'm curious can someone post a pic with the slide open. I don't remember looking down into gun and seeing part of the slide catch spring, any help would be greatly appreciated.
Thanks(https://uploads.tapatalk-cdn.com/20171013/ecea06689d554f422cee8b14aff95d38.jpg)(https://uploads.tapatalk-cdn.com/20171013/452341e48897ad5dea5277d0e019e056.jpg)
Sent from my LG-LS997 using Tapatalk
-
Just installed the blue one with 3.5 lb spring. Everything looks good & feels great but I'm curious can someone post a pic with the slide open. I don't remember looking down into gun and seeing part of the slide catch spring, any help would be greatly appreciated.
Thanks
Sent from my LG-LS997 using Tapatalk
That's normal. As long as it's hooked over that little ledge, you're good to go.
-
Appreciate the response, 300 flawless rnds through her this afternoon and all I have to say is wow!
Sent from my LG-LS997 using Tapatalk