The Original CZ Forum

CZ LONG ARMS => CZ Scorpion EVO => Topic started by: KeithB on October 15, 2017, 11:36:29 AM

Title: Stock hinge pin
Post by: KeithB on October 15, 2017, 11:36:29 AM

As I saw on a previous post, my stock is not the only one to have the hinge pin start to walk out while shooting.  Did anyone find a fix for this?

Title: Re: Stock hinge pin
Post by: akuser47 on October 15, 2017, 08:29:44 PM

I would think you could stake the plastic to hold the pin. I don't remember what was come up with in the old thread on it.

Title: Re: Stock hinge pin
Post by: KeithB on October 16, 2017, 12:26:07 AM

The old thread did not have a solid solution.

Title: Re: Stock hinge pin
Post by: akuser47 on October 16, 2017, 07:15:03 PM

Figures maybe you'll be the first to make something work. please share what you find or figure out.

Title: Re: Stock hinge pin
Post by: romukom on October 20, 2017, 07:50:08 AM

Here you go. There are several solutions you can pick.
http://www.czfirearms.us/index.php?topic=87675.0

Sent from my SM-T713 using Tapatalk

Title: Re: Stock hinge pin
Post by: Destructo6 on October 20, 2017, 01:39:53 PM

4mm O-1 tool steel rod from McMaster Carr for about $3 (3 foot length).

find a machinist to cut to length, round the ends, knurl a bit of one end, and harden, and Bob's your uncle.

Title: Re: Stock hinge pin
Post by: akuser47 on October 21, 2017, 08:10:30 PM

I thought I had been involved in this problem before lol.