The Original CZ Forum

GENERAL => Cajun Gun Works => Topic started by: Ops on March 07, 2018, 12:28:14 AM

Title: CGW Pro Package required tools
Post by: Ops on March 07, 2018, 12:28:14 AM

After a few years of owning a P07 I thought it was finally time to upgrade it.

What tools would I find either necessary or helpful during installation of the CGW Pro Package (97098)?

What about for getting a good polish?

Looking forward to the replies.

EDIT: I have looked through the forums and am tracking I'll need the CGW Starter punch, or would this set serve me better https://www.amazon.com/gp/product/B01N4N1XS5/ref=ox_sc_act_title_1?smid=A1IAGFXK3ICQ72&psc=1?

Other than that tool I'm not sure if I require anything else?

Title: Re: CGW Pro Package required tools
Post by: painter on March 07, 2018, 06:56:11 AM

A set of punches is handy, but the starter punch is a necessity,

Get the CGW punch!

Title: Re: CGW Pro Package required tools
Post by: Joe L on March 09, 2018, 06:00:56 AM

You definitely need the CGW punch for the 75 series steel guns.  I didn't need it for the P-09/07 pistols for anything, as the hammer pin is captured in the frame insert. 

I made some videos a few years ago when the polymer guns first came out that should be helpful to you.  The polymer guns are great to work on, I love'em.

https://www.youtube.com/playlist?list=PL7GbOFIiTV0zywDb1XrQ2FMDvFsgCtXkF (https://www.youtube.com/playlist?list=PL7GbOFIiTV0zywDb1XrQ2FMDvFsgCtXkF)

Take a look at these and you will see all the tools you need and how to assemble/disassemble the pistol to install your CGW parts.  They are fantastic in these pistols. 

Joe