The Original CZ Forum

CZ LONG ARMS => CZF RIMFIRES => Topic started by: spencerhut on March 09, 2018, 10:54:15 PM

Title: TacSol Custom CZ 512's
Post by: spencerhut on March 09, 2018, 10:54:15 PM: Our good friends at Tactical Solutions lightened up a couple of CZ 512's for us to use in NSSF matches. Can't wait to get them out and pound some rounds through them.
(https://farm5.staticflickr.com/4801/39824229505_7d3611eca7_b.jpg)
Title: Re: TacSol Custom CZ 512's
Post by: spencerhut on March 12, 2018, 09:03:14 PM: Did some work on the trigger of my wife's gun. Started at 4.25lbs and got it down to 2.5lbs. No creep, zero over travel. Runs 100%
Cut the trigger shoe off and re-welded it as far back as possible (she has really small hands)
Trimmed the sear engagement surface on the hammer just a bit.
Drilled hole for trigger spring just shy of stock engagement surface.
Polished all the usual hammer and trigger surfaces.
Trigger is ~1/4" shorter reach now. Actually feels so nice I may cut mine too :-)
Stock trigger on top.
(https://farm5.staticflickr.com/4800/40777753401_d02f405c33_b.jpg) (https://flic.kr/p/258oDpP)CZ512 Trigger (https://flic.kr/p/258oDpP) by spencerhut (https://www.flickr.com/photos/29419443@N08/), on Flickr
Title: Re: TacSol Custom CZ 512's
Post by: spencerhut on March 12, 2018, 09:04:42 PM: No optic mounts yet but I went ahead and function tested both guns with ~300 rounds each. (1) fail to feed and one fail to fire out of 650 rounds total out of both guns. Used a dozen 10-Round mags. Chronographed both guns and even with barrels 4" shorter than stock. the TacSol barrels were only ~10FPS slower. That is amazing! A good start!
(https://farm5.staticflickr.com/4797/40728418952_c45546ab23_b.jpg) (https://flic.kr/p/2542MZS)SAM_5134 (https://flic.kr/p/2542MZS) by spencerhut (https://www.flickr.com/photos/29419443@N08/), on Flickr
Title: Re: TacSol Custom CZ 512's
Post by: KnightSchneider on March 13, 2018, 06:58:55 AM: those look good!
are you going to be selling any?
Title: Re: TacSol Custom CZ 512's
Post by: spencerhut on March 13, 2018, 11:02:09 AM: Quote from: KnightSchneider on March 13, 2018, 06:58:55 AM
those look good!
are you going to be selling any?

There would have to be a lot of interest to make this worth regular production.
Title: Re: TacSol Custom CZ 512's
Post by: Baker_cs on March 14, 2018, 01:57:00 PM: You may add my name to the list of interested people
Title: Re: TacSol Custom CZ 512's
Post by: spencerhut on March 15, 2018, 11:20:13 AM: Quote from: Baker_cs on March 14, 2018, 01:57:00 PM
You may add my name to the list of interested people
Well that is one, we only need about 999 more to get any hope of doing this . . . ;D
Title: Re: TacSol Custom CZ 512's
Post by: Psyop96 on March 15, 2018, 11:57:00 AM: Nice work! 999...are there even that many 512s in the US market? [emoji3]. Really like the CZ 512 Tactical version; don?t think the 512 models get the attention they deserve.
Title: Re: TacSol Custom CZ 512's
Post by: spencerhut on March 15, 2018, 02:30:53 PM: Oh there are WAY more than 1k out there. Not sure of the exact number.
Title: Re: TacSol Custom CZ 512's
Post by: smike308 on January 06, 2019, 05:59:31 PM: I?m late to the show, but, I?m interested in your trigger mods if it comes to be. Probably two units.
Title: Re: TacSol Custom CZ 512's
Post by: ben512 on January 20, 2019, 12:36:22 AM: I want that for my 512 carbine. It would be perfect as that is my walking hunter rifle
Title: Re: TacSol Custom CZ 512's
Post by: FallenEagle on February 12, 2019, 11:09:15 PM: Where did you get the Hogue stock set for the 512?
Title: Re: TacSol Custom CZ 512's
Post by: Jiva on February 16, 2019, 08:46:50 AM: Looks awesome! I would love to have one of those - great job!

However, I imagine after all the work done the price would be exorbitant.
Title: Re: TacSol Custom CZ 512's
Post by: jross239 on March 17, 2019, 04:29:42 AM: Those stocks are nice.

Im looking for a stock for my 512 wmr

Kind of tired of the tacticool ATI kit and want that regular rifle look for a change

Sent from my SM-N950U using Tapatalk