The Original CZ Forum

GENERAL => Cajun Gun Works => Topic started by: Litshoot on March 13, 2018, 05:42:22 PM

Title: Cgw pro kit on p07
Post by: Litshoot on March 13, 2018, 05:42:22 PM
Hello, while installing the kit I came a cross a few things I'm curious how others handled it.

Do you use the extended firing pin spring it comes with, or the firing pin spring from the spring kit

Also has anybody had any issues of light strikes using the 15 pound spring with the extended firing pin, or is it best to keep the 18 for a carry gun.  I do plan to extensively test if I switch to the 15 pound spring before settling on a carry load. 
Title: Re: Cgw pro kit on p07
Post by: CraZy81 on March 15, 2018, 10:04:34 PM
A. same spring in the kit as well as the extended firing pin.

B. 15# Hammer spring should set off all but the heaviest primers.  I have not had one failure with the 15#. I have fired Federal, and Speer (which uses a heavy CCI primer). I do however keep the 18# installed.
Title: Re: Cgw pro kit on p07
Post by: Litshoot on March 27, 2018, 03:14:59 PM
Thanks.