The Original CZ Forum

GENERAL => CZ Gunsmithing => Topic started by: dbarn on June 02, 2018, 01:04:37 PM

Title: Decocker Lever Install Help
Post by: dbarn on June 02, 2018, 01:04:37 PM

Have removed my Decocker lever on left side. I know to lift the sear spring but it will not insert the rest of the way. I have not removed the sear cage. It came out easy enough by lifting the spring. It would seem reassembly would be in the reverse. What am I missing?

Title: Re: Decocker Lever Install Help
Post by: dbarn on June 02, 2018, 02:01:05 PM

Ahh I got it. Looking at my P-01 assembled help. I was trying to move the decock lever in the sear cage to the rear. It needed to go forward.  ;D

Title: Re: Decocker Lever Install Help
Post by: Stuart on June 02, 2018, 02:11:24 PM

Move the decocker lever in the cage forward or back. The outer lever should push in then.

Title: Re: Decocker Lever Install Help
Post by: dbarn on June 02, 2018, 02:15:59 PM

Quote from: Stuart on June 02, 2018, 02:11:24 PM

Move the decocker lever in the cage forward or back. The outer lever should push in then.

Exactly right! I wanted to switch from an ambidextrous decock lever to a left side only on my SP-01 Tactical. Now maybe the callous below my right index finger will go away.