The Original CZ Forum
GENERAL => Cajun Gun Works => Topic started by: jtj5002 on September 17, 2018, 11:21:40 AM
-
I recently installed the pro package with the .225 roller. Currently single action is breaking at the very back of the trigger pull with almost zero over travel. Sometimes the trigger will actually hit the frame, and the trigger flexing is what actually releases the hammer. While having zero over travel is nice, I am worried about the consistency of trigger breaks. Will the larger .230 roller move single action break slightly forward without affecting double action too much? Double action currently releases the hammer at about 3/4th of full hammer travel and sets off all primers up to CCI primers, and has about 2-5% light strikes on wolf primers using 18 lb hammer spring.
Factory roller is .224 and breaks almost exactly like CGW .225
Thank you!