The Original CZ Forum

CZ PISTOL CLUBS => CZ82 & CZ83 CLUB => Topic started by: dtomp on March 09, 2019, 11:07:28 AM

Title: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: dtomp on March 09, 2019, 11:07:28 AM
Was looking around and found these cz 82's at J&G Sales. $249. in good condition, or same gun with chipped grips for $199. The extra mags are a bit stiff at $49. I think if I come up with a few extra bucks I might try to buy one. These are the cheapest prices I've seen in awhile. Why but a Star when you can have an 82 at the same price.
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: sybertag on March 09, 2019, 04:39:12 PM
I picked up one with chipped grips a while back. The finish is a bit rough around the muzzle and the front of the grip, but it functions flawlessly and shoots dead on. Definitely recommended.
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: dtomp on March 09, 2019, 05:16:54 PM
Great, sounds like you got a good deal. That's kind of a rare creature in the gun world.
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: 9026543 on March 15, 2019, 07:32:41 PM
My chipped grip CZ 82 from J&G Sales arrived last Monday. It is in better shape than I expected and with the $17.95 magazines from Aim Surplus am good to go. Haven't shot the gun yet but expect it will be good. Didn't appear to have been fired all that much when I field stripped it to clean before shooting. The paint finish on the front of the slide is a little rough but not excessive. All in all I am happy with the $199.95 gun. :)
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: dtomp on March 16, 2019, 12:34:05 AM
A lot of guys change the grips anyway, so at $199. it's a win win. The original black plastic are the cheapest, but there are several choices for different styles and material. Enjoy!!!
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: 9026543 on March 18, 2019, 05:45:46 PM
Took the CZ 82 to the range this morning. It ran fine with FMJ but had trouble feeding the Hornady XTP JHP. Came home and polished the heck out of the feed ramp hoping that will cure the problem. Will find out later in the week.
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: dtomp on March 18, 2019, 06:34:02 PM
Hope that cures the problem. Check your mags too!
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: 9026543 on April 05, 2019, 03:02:48 PM
Finally made it back to the range this morning to test out the feed ramp polish job. Gun ran like a charm with no problem feeding the Hornady XTP JHP ammo this time. I may touch up the feed ramp just a tad to make sure.
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: dtomp on April 05, 2019, 03:17:30 PM
You probably know to be careful with the feed ramp and don't remove any material. Just polish the hell outta it. It's not so easy to replace metal on a feed ramp. Glad it worked for you, enjoy it.
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: 9026543 on April 05, 2019, 07:46:51 PM
I didn't remove any metal from the feed ramp. I used my Dremel tool with a felt polishing tip and jewelers rouge. Made it good and slick and shines like a mirror.
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: dtomp on April 06, 2019, 12:11:05 AM
Very good. Well I hope that's all it needs. Hope you have a lot of flying brass next trip to the range. enjoy
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: Blaiwayw on April 12, 2019, 02:37:38 PM
After I received my first $199 I ordered two more.  I intended to refinished them, so wasn?t concerned about the chipped paint or the grips.  One parkerized, second was sniper gray cerakote,(hard to tell which is which). Third is cerakote OD green.  The walnut grips are from CZ USA, and the fit is perfect.

(https://uploads.tapatalk-cdn.com/20190412/50059fd7a780ea20efe987f22e6ea22d.jpg)


Sent from my iPad using Tapatalk
Title: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: Blaiwayw on April 12, 2019, 02:43:09 PM
And, if you want to disassemble the 82, there is a very good step by step at Leolani.net.  That sear spring can be a bugger until you learn the process.  I made a tool that makes it much easier.

(https://uploads.tapatalk-cdn.com/20190412/ad18db23ca2f9617c016e02210d5e35d.jpg)


Sent from my iPad using Tapatalk
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: dtomp on April 12, 2019, 03:41:13 PM
Yeah I downloaded the step by step. Could you show the end of the tool?
Title: Re: J&G sales - cz 82's $249. or $199. w/ chipped grips
Post by: Blaiwayw on April 12, 2019, 04:50:20 PM
Just a thin bladed screwdriver spare.  Jewelers screwdriver with a shallow v filed in it. I found that it was easier to position the sear spring if the ejector pin was installed.  Use a vise to hold the frame while you pull back the autosafety to position the spring.  (https://uploads.tapatalk-cdn.com/20190412/2d4f36a8dea6bc8fa1a4b3a70970fb95.jpg)


Sent from my iPad using Tapatalk