The Original CZ Forum

CZ LONG ARMS => CZ Scorpion EVO => Topic started by: dek on August 10, 2019, 12:20:32 AM

Title: HK 3 Lug Connection
Post by: dek on August 10, 2019, 12:20:32 AM
 If you have both 1/2x28 and 13x1 available is one preferable to the other? I like the idea of the HK 13x1 - LH thread and locks with retaining clip. No need for loctite.
Title: Re: HK 3 Lug Connection
Post by: OpusXJ on August 12, 2019, 12:19:45 AM
The retaining clip doesn't always line up on the 18x1 mounts. I'd use a 1/2"-28 mount and some Rocksett.
Title: Re: HK 3 Lug Connection
Post by: Bill_J on August 14, 2019, 03:36:56 PM
With 3 lug its easy to never have to worry..... Always turn clock wise.  That way every time you take the suppressor on or off, you are tightening the mount to the barrel.

But I still put a drop of rocksett on them.
Title: Re: HK 3 Lug Connection
Post by: OnlyHereForEE on August 22, 2019, 11:13:41 AM
Doesn’t matter. I prefer 1/2x28
Use
Rocksett and you’re good to go
Title: Re: HK 3 Lug Connection
Post by: cocowheats on September 02, 2019, 11:20:44 PM
The retaining clip doesn't always line up on the 18x1 mounts. I'd use a 1/2"-28 mount and some Rocksett.

This.

I used an HK Parts 18x1 and then cut/threaded the barrel for 1/2x28 and now use a 3lug in 1/2x28.