The Original CZ Forum

CZ LONG ARMS => CZ Scorpion EVO => Topic started by: Trooper894 on August 10, 2019, 05:44:37 PM

Title: Micro full barrel length
Post by: Trooper894 on August 10, 2019, 05:44:37 PM
Can someone advise the actual full length of a MICRO's barrel from the CLOSED bolt face to the outer end of the "faux" suppressor? 
Title: Re: Micro full barrel length
Post by: Asylum9 on August 10, 2019, 11:32:30 PM
I believe the micro has a removable barrel extension to protrudes into the faux suppressor. I don't know if that removable section would have any impact on the measurements you requested or not but figured it was worth pointing out.
Title: Re: Micro full barrel length
Post by: Trooper894 on August 11, 2019, 10:08:06 AM
I am aware of the "barrel extension" that is actually the "Faux" suppressor nut, that is why I am asking for the total overall length of the barrel + "faux" suppressor from the closed breach face.  I am getting ready to place an order for a Micro and I always put together a cleaning kit for each gun case that includes a Pro Shot SS cleaning rod. Thus the reason for needing the overall barrel length so I order the correct length cleaning rod.
Title: Re: Micro full barrel length
Post by: OpusXJ on August 12, 2019, 12:18:16 AM
It's right around 5.5", maybe a touch longer.
Title: Re: Micro full barrel length
Post by: Trooper894 on August 12, 2019, 09:12:59 AM
OpusXJ - thank you.
Title: Re: Micro full barrel length
Post by: Fredward on August 30, 2019, 10:33:35 AM
FYI, mine came with a CZ branded bore snake type device that works great. No need for a rod, but if you want one I've found a 7 inch Dewey pistol rod works quite well, too.