The Original CZ Forum

CZ LONG ARMS => CZ Scorpion EVO => Topic started by: jtice on September 05, 2019, 04:39:04 PM

Title: Looking for Scorpion Sights
Post by: jtice on September 05, 2019, 04:39:04 PM
Anyone know where you can buy the sights that come on the Scorpion?
Or any sights that are very similar?
I cant seem to find any low profile sights like the Scorpions at all.
Title: Re: Looking for Scorpion Sights
Post by: mtl111 on September 05, 2019, 05:02:07 PM
I've got Troy micro HK front and rear sights on mine. Love em!(https://uploads.tapatalk-cdn.com/20190905/d80656b71f465d460b147046e27123b3.jpg)

Sent from my SAMSUNG-SM-G930A using Tapatalk

Title: Re: Looking for Scorpion Sights
Post by: the war wagon on September 05, 2019, 06:53:25 PM
I JUST sold the ones off my 805 (which are identical), but like mtl111, I went with Troy.  I run 'em on ALL my AR's - they're the same as my PTR91 - so I'm already used to 'em.
Title: Re: Looking for Scorpion Sights
Post by: coanan on September 05, 2019, 07:37:52 PM
What are the worth?
Title: Re: Looking for Scorpion Sights
Post by: TjB101 on September 06, 2019, 06:17:44 AM
The factory sights on my Scorpion are fine if you are shooting it as a pistol.  If you have a brace, and try to cheek weld the stock, the sights are too low to use.  Get something with some additional height.
Title: Re: Looking for Scorpion Sights
Post by: motorolanut on September 07, 2019, 08:44:04 AM
MBUS PRO not the standard plastic ones.
Title: Re: Looking for Scorpion Sights
Post by: the war wagon on September 07, 2019, 06:19:48 PM
The factory sights on my Scorpion are fine if you are shooting it as a pistol.  If you have a brace, and try to cheek weld the stock, the sights are too low to use.  Get something with some additional height.

EXACTLY!  Full size Troy's (and probably any other BUIS) co-witness well with most red dots.
Title: Re: Looking for Scorpion Sights
Post by: Henny on September 08, 2019, 07:14:59 PM
The factory sights on my Scorpion are fine if you are shooting it as a pistol.  If you have a brace, and try to cheek weld the stock, the sights are too low to use.  Get something with some additional height.

EXACTLY!  Full size Troy's (and probably any other BUIS) co-witness well with most red dots.

I must be the odd guy. The Scorpion sights are just right for me and readily cowitness with my Aimpoint. Then again, I’m the guy that the right side safety paddle doesn’t bother either!   ;D

(https://imgur.com/a/oa5opoL)

https://imgur.com/a/oa5opoL (https://imgur.com/a/oa5opoL)

ETA: for some reason or another I can’t post pictures on the board from my iPad.  :-\
Title: Re: Looking for Scorpion Sights
Post by: stevep1794 on September 09, 2019, 08:19:37 AM
Are you looking for a pair of factory sights?? PM me. I don't need mine
Title: Re: Looking for Scorpion Sights
Post by: Earl Keese on September 16, 2019, 11:08:51 PM
What are the worth?
A set just sold on Ebay for $161 plus shipping.
Title: Re: Looking for Scorpion Sights
Post by: jtice on September 17, 2019, 07:23:39 AM
Thanks to those that have offered me some sites for sale.
but I think I'm actually going to go a different route. Was actually looking for a set for a kpos scout. Which now is on backorder for quite a while.
Looks like you guys can make Bank on eBay with them though!
Title: Re: Looking for Scorpion Sights
Post by: John A. on September 17, 2019, 09:01:53 AM
The factory sights on my Scorpion are fine if you are shooting it as a pistol.  If you have a brace, and try to cheek weld the stock, the sights are too low to use.  Get something with some additional height.

I found the opposite to be true.

The taller height AR15 sights and eotech threw off my cheek weld and it turned more into a chin weld.

I guess this is subjective to the person behind the gun, but I always snug down pretty good on a stock or brace or whatever.  Too many years of shotgunning has taught me what happens when you aren't holding a gun correctly and is just carried over from that.