Post by: scotheocelot on November 10, 2019, 09:20:52 PM
Quick Rundown:
CZ Bren 2 Ms Pistol 9” 5.56
Dan Haga ACR Adapter Pistol Brace
KBI Trigger
KBI Charging Handle
KBI Selector Nubs
Cloud Defense Switch Holder
Surefire Tape Switch
Arisaka 300 Light
Bobro QD Scout Light Mount
TDI Arms Hybrid Hand Stop
Surefire Warcomp Flash Hider Comp
Surefire Warden
EOTech EXPS3-2
Sent from my iPhone using Tapatalk
Post by: scotheocelot on November 11, 2019, 04:05:48 PM
(https://uploads.tapatalk-cdn.com/20191111/edfcfd7964c9c5790f25b309473df021.jpg)
Sent from my iPhone using Tapatalk
Post by: wags68 on November 11, 2019, 06:29:15 PM
Post by: scotheocelot on November 12, 2019, 10:25:08 AM
Very Nice!
Thank you!
Sent from my iPhone using Tapatalk
Post by: rdcinhou on November 12, 2019, 10:38:48 AM
https://czfirearms.us/index.php?topic=97811.msg754628#msg754628
Post by: the war wagon on November 13, 2019, 12:41:11 AM
Post by: rbuzz00 on November 13, 2019, 05:39:53 PM
(https://uploads.tapatalk-cdn.com/20191111/802da006f787a8ca01d30007893d4308.jpg)
Sent from my iPhone using Tapatalk
Great looking Bren 2, I'm jealous! Just out of curiosity, how do you like the Dan Haga brace? I've been tempted to order the exact same setup as you have but I've been concerned about the finish on the brace adaptor. According to the website repeated usage can cause the finish to wear revealing the white plastic underneath. Other than that concern, it looks first class.
How is your doing so far?
Post by: scotheocelot on November 14, 2019, 10:23:52 AM
I've not found a "picture thread" specifically for Bren 2, but here's a link to a photo of my Bren as well as a few other people's:
https://czfirearms.us/index.php?topic=97811.msg754628#msg754628
Very nice! I love the two tones of the 805’s. The pistol grip makes me cringe a little but hats off for exercising your rights.
Sent from my iPhone using Tapatalk
Post by: scotheocelot on November 14, 2019, 10:31:40 AM
Veddy, veddy, nice! Are you a lefty, perchance? As a STRONGLY dominant righty, my flashlights are ALWAYS on the left (offhand) side. I see a lot more on the right side these days, but if one is NOT a lefty (or has foot-long fingers!!!), I'm curious as to the reason for strong-side migration of lights for rightys!
Well, as you can tell from the picture, the hand guard is quite short so space is a premium. I am right handed so I prefer to have my “essentials” on the left typically. BUT given the Cloud Defense/Surefire Switch on top rail, it creates an Ambi operation of the light. If that’s the case, I prefer my lights on the right to free up space on the left for more grip area/options. Given the extent of CZ design to create a nearly complete AMBI pistol, I wanted to extend that philosophy to added accessories.
Sent from my iPhone using Tapatalk
Post by: scotheocelot on November 14, 2019, 10:39:09 AM
Great looking Bren 2, I'm jealous! Just out of curiosity, how do you like the Dan Haga brace? I've been tempted to order the exact same setup as you have but I've been concerned about the finish on the brace adaptor. According to the website repeated usage can cause the finish to wear revealing the white plastic underneath. Other than that concern, it looks first class.
How is your doing so far?
I absolutely LOVE Dan Haga’s ACR adapting brace. It absolutely makes this pistol a useful setup. Adjustable pull and cheek riser. I am getting consistent cheek welds just as my AR’s. And of course it looks absolutely AWESOME on the Bren. I get your concern regarding the finish. However there is a couple of solutions I have already planned for if it comes to that. 1) You could have it hydrodipped a semi flat black or 2) SEM black trim paint available online or automotive store is very close and designed for painting plastic pieces.
In my opinion no other brace comes close to fit, finish and most of all USABILITY. I am already planning to replace the SB brace from my Scorpion to a Dan Haga.
Post by: rbuzz00 on November 14, 2019, 04:37:55 PM
I absolutely LOVE Dan Haga’s ACR adapting brace. It absolutely makes this pistol a useful setup. Adjustable pull and cheek riser. I am getting consistent cheek welds just as my AR’s. And of course it looks absolutely AWESOME on the Bren. I get your concern regarding the finish. However there is a couple of solutions I have already planned for if it comes to that. 1) You could have it hydrodipped a semi flat black or 2) SEM black trim paint available online or automotive store is very close and designed for painting plastic pieces.
In my opinion no other brace comes close to fit, finish and most of all USABILITY. I am already planning to replace the SB brace from my Scorpion to a Dan Haga.
Thanks for the information. I have to admit the ACR stock and the Dan Hagan adaptor makes the best looking brace for the Bren 2. The Strongarm brace also looks great. I had wanted to SBR my Bren when I get it, but since CZ hasn't shown any signs of coming out with the CZ stock, I might just go the brace route. It's kind of expensive, but it sure looks nice. The only thing holding me back is the durability question.
Post by: anubismp on November 14, 2019, 08:10:14 PM
Post by: Lima26 on November 18, 2019, 10:28:55 PM
(https://live.staticflickr.com/65535/49003715443_e1e084c2e6_c.jpg)
Post by: COJeff on November 19, 2019, 08:21:39 PM
8" Bren 2MS with Dan Haga Designs ACR Tailhook adapter.
How is the adapter given it is plastic?
Post by: beanz2 on November 20, 2019, 07:29:51 PM
8" Bren 2MS with Dan Haga Designs ACR Tailhook adapter.
How is the adapter given it is plastic?
The initial batch of 10 (which sold out within hours) were plastic just like his current B&T APC adapters, but the production Bren 2 adapters are aluminum AFAIK.
.
Post by: Brenfan on November 20, 2019, 08:15:30 PM
(https://i.postimg.cc/tC4398rW/20190113-171258.jpg)
Post by: the war wagon on November 27, 2019, 11:09:41 PM
Post by: Brenfan on November 28, 2019, 03:09:26 PM
Would LOVE to have found one in FDE - couldn't pass on the price of mine in black, but that looks sharp! 8)
Thank you!!
I tell ya man, I will NEVER get rid of this one.
I just wish I could snag a black one too, before they're all gone.
Which, they probably are :(
Post by: scotheocelot on November 29, 2019, 09:43:24 AM
8" Bren 2MS with Dan Haga Designs ACR Tailhook adapter.
(https://live.staticflickr.com/65535/49003715443_e1e084c2e6_c.jpg)
Awesome Lima! Are you running a different gas setting with the suppressor? I’m still waiting on mine to be released from ATF jail lol.
Sent from my iPhone using Tapatalk
Post by: scotheocelot on November 29, 2019, 09:45:13 AM
Bren 805 PS1 in FDE
(https://i.postimg.cc/tC4398rW/20190113-171258.jpg)
If CZ Releases the Bren 2 Ms in FDE, possibly in .308, I will be pre-ordering one. Love the FDE
Sent from my iPhone using Tapatalk
Post by: Brenfan on November 29, 2019, 03:04:07 PM
Yeah, I would really like to snag a 308 myself.
Post by: the war wagon on December 01, 2019, 07:10:09 AM
Would LOVE to have found one in FDE - couldn't pass on the price of mine in black, but that looks sharp! 8)
Thank you!!
I tell ya man, I will NEVER get rid of this one.
I just wish I could snag a black one too, before they're all gone.
Which, they probably are :(
There's a shop in AL that keeps listing them, about once every two weeks, on G-B - for under $1,400 - which is how I got mine. 8)
Post by: scotheocelot on December 01, 2019, 08:23:58 AM
(https://uploads.tapatalk-cdn.com/20191201/e0daea5f2471bf7147827a6dc63d6e12.jpg)
Post by: nonamehavei on December 02, 2019, 09:51:44 AM
I had the chance to finally sight in the EOTech and run some reload drills. I have no issue saying CZ has built a successor to the SCAR and AKM platforms. Intuitive controls, little noticeable recoil, easy field strip and usable manipulation with my off hand. Some of you Bren 805 guys will appreciate how easy CZ has made the takedown and bolt removal.
That is an epic looking build, would you mind sharing the specs and mods?
Post by: scotheocelot on December 02, 2019, 10:50:54 PM
That is an epic looking build, would you mind sharing the specs and mods?
Thank you! I gave a rundown on my first post to this thread. It is already so good out of the box it only needed some tweaks which KBIndustries had solutions for. The stock trigger and plastic safety lever nubs were the most notable upgrades. The charging handle doesn’t need extension unless your optics base is wide like an EOTech.
Sent from my iPhone using Tapatalk
Post by: Brenfan on December 04, 2019, 12:18:34 PM
Please excuse my ignorance, but if I add the Haga brace to my 805 ps1, the other Bren in this thread, the fde one, will she still be considered a pistol?
Post by: scotheocelot on December 05, 2019, 02:15:17 PM
I really like the Dan Haga Brace
Please excuse my ignorance, but if I add the Haga brace to my 805 ps1, the other Bren in this thread, the fde one, will she still be considered a pistol?
I don’t see why not. Dan Haga Design still an arm brace with adapter. This is ASSUMING your barrel to receiver end length falls within the “pistol” category. It’s it’s currently a pistol, it will remain a pistol with this brace.
Sent from my iPhone using Tapatalk
Post by: the war wagon on December 05, 2019, 03:34:52 PM
(https://uploads.tapatalk-cdn.com/20191201/e0daea5f2471bf7147827a6dc63d6e12.jpg)
Anyone know if this brace fits the SP-1?
That is one SCHWEET build. Is it that color from the factory?
Post by: scotheocelot on December 05, 2019, 06:20:57 PM
Anyone know if this brace fits the SP-1?
That is one SCHWEET build. Is it that color from the factory?
Thank you for the kind words. So far she has eaten everything I’ve thrown it’s way. I would message Dan Haga on Insta. If you don’t have Insta I believe he has an email to contact. He is great about getting back to you. He makes them for Bren 805 and Bren 2. He also makes them fit H&K, B&T and various other models. Well worth the money.
Oh and YES, that is the factory color.
Sent from my iPhone using Tapatalk
Post by: Brenfan on December 06, 2019, 08:37:30 AM
I don’t see why not. Dan Haga Design still an arm brace with adapter. This is ASSUMING your barrel to receiver end length falls within the “pistol” category. It’s it’s currently a pistol, it will remain a pistol with this brace.
Of course, it says brace
Sorry about that
But, the only thing I can find is a brace for the Bren 2.
Post by: scotheocelot on December 12, 2019, 04:42:02 AM
I really like the Dan Haga Brace
Please excuse my ignorance, but if I add the Haga brace to my 805 ps1, the other Bren in this thread, the fde one, will she still be considered a pistol?
Of course, it says brace.
Sorry about that.
But, the only thing I can find is a brace for the Bren 2.
https://danhagadesigns.com/bren-805-acr-adapter/
Post by: Brenfan on December 12, 2019, 11:06:24 AM
Dan Haga Designs
https://danhagadesigns.com/bren-805-acr-adapter/
Ahh..thank you.
So, $280 for the whole shootin match
I'm gonna have to wait. Plus, I wish they had an FDE version to match my PS1.
Post by: HBi on December 13, 2019, 01:37:56 PM
Post by: HBi on December 13, 2019, 01:38:43 PM
(http://hbindustries.net/store/wp-content/uploads/2019/12/HBI-CZ-BREN-2-MS-HANDGUARD_DIRECT-MOUNT-LIGHT_FRONT.jpg)
Post by: Brenfan on December 13, 2019, 04:56:01 PM
Post by: scotheocelot on December 15, 2019, 09:43:05 AM
Also... cant help it... love this shot:
(http://hbindustries.net/store/wp-content/uploads/2019/12/HBI-CZ-BREN-2-MS-HANDGUARD_DIRECT-MOUNT-LIGHT_FRONT.jpg)
BIG FAN of your items. Both my Bren 2 and Scorpion is outfitted with your products. If I may kindly make a request for us 8.5” barrel guys who wish to keep the factory short hand guard, could you produce a replacement lower rail that allows more mounting positions? Adapting to the useless Mlok area on the lower rail was an episode of trial and error. It works but not the most ideal for my tastes.
Does this pic make me the ultimate range hipster?
(https://uploads.tapatalk-cdn.com/20191215/030798f03fab2f8b8fb534ff1b053909.jpg)
Post by: the war wagon on January 18, 2020, 01:37:03 PM
Well... not in THIS thread... yet... ;)
(https://i.ibb.co/K56dS34/100-5489-crop.jpg)
BEFORE I switched to the Gear Sector sling.
(https://i.ibb.co/gjD0SGC/100-5337-crop.jpg)
Post by: scotheocelot on January 19, 2020, 05:42:13 PM
Post by: PorterN on January 29, 2020, 08:28:48 PM
Post by: jolebole on February 01, 2020, 02:51:37 PM
(https://uploads.tapatalk-cdn.com/20200201/7a7432fc95c548e5710b580882f20dd6.jpeg)
(https://uploads.tapatalk-cdn.com/20200201/bfe54a8ccf184a8738f29faf856ed8f4.jpeg)
Post by: Mr_5lade on February 10, 2020, 03:50:44 PM
(https://uploads.tapatalk-cdn.com/20200210/9fe7a4fccbc41ff8f7607fecf40360e2.jpg)
(https://uploads.tapatalk-cdn.com/20200210/474c629acbd3fd7d6a12be4d2365c481.jpg)
Post by: Tsar on February 10, 2020, 11:28:22 PM
I don’t see why not. Dan Haga Design still an arm brace with adapter. This is ASSUMING your barrel to receiver end length falls within the “pistol” category. It’s it’s currently a pistol, it will remain a pistol with this brace.
Please stop bringing up the erroneous length measurement aspect for pistols. There is no minimum or maximum overall length to "pistols" as far as the ATF is concerned. The only time it matters is if you have to deal with it is in Michigan (currently on MI, let's hope it stays that way) or if you want to add a VFG. (Barrel < 16in, OAL >26in, no stock and VFG counts as a "firearm" as opposed to AOW or SBR)
Post by: scotheocelot on February 12, 2020, 08:44:39 AM
I don’t see why not. Dan Haga Design still an arm brace with adapter. This is ASSUMING your barrel to receiver end length falls within the “pistol” category. It’s it’s currently a pistol, it will remain a pistol with this brace.
Please stop bringing up the erroneous length measurement aspect for pistols. There is no minimum or maximum overall length to "pistols" as far as the ATF is concerned. The only time it matters is if you have to deal with it is in Michigan (currently on MI, let's hope it stays that way) or if you want to add a VFG. (Barrel < 16in, OAL >26in, no stock and VFG counts as a "firearm" as opposed to AOW or SBR)
Calm down. Please tell me where I gave “erroneous lengths” in my comment. Hint: I didn’t. I simply said if the firearm is recognized as a pistol, adding a brace does not change it from being a pistol.
Sent from my iPhone using Tapatalk
Post by: scotheocelot on February 12, 2020, 08:45:36 AM
Here’s mine...
(https://uploads.tapatalk-cdn.com/20200210/9fe7a4fccbc41ff8f7607fecf40360e2.jpg)
(https://uploads.tapatalk-cdn.com/20200210/474c629acbd3fd7d6a12be4d2365c481.jpg)
The Wolverine suppressor looks right at home. Sweet setup!
Post by: PorterN on February 12, 2020, 10:55:42 AM
Post by: Tsar on February 12, 2020, 07:55:39 PM
I don’t see why not. Dan Haga Design still an arm brace with adapter. This is ASSUMING your barrel to receiver end length falls within the “pistol” category. It’s it’s currently a pistol, it will remain a pistol with this brace.
Please stop bringing up the erroneous length measurement aspect for pistols. There is no minimum or maximum overall length to "pistols" as far as the ATF is concerned. The only time it matters is if you have to deal with it is in Michigan (currently on MI, let's hope it stays that way) or if you want to add a VFG. (Barrel < 16in, OAL >26in, no stock and VFG counts as a "firearm" as opposed to AOW or SBR)
Calm down. Please tell me where I gave “erroneous lengths” in my comment. Hint: I didn’t. I simply said if the firearm is recognized as a pistol, adding a brace does not change it from being a pistol.
Sent from my iPhone using Tapatalk
"This is ASSUMING your barrel to receiver end length falls within the “pistol” category. "
This line is erroneous, as there are no "length" measurements in the definition of a pistol. Please, don't take it personally, it's a common bit of misinformation that's been making the rounds lately. Sorry if I seemed like a dick.
Post by: Mr_5lade on February 12, 2020, 08:29:30 PM
Mr_5lade, that is one gorgeous pistol. I have the 11" now, but I'm definitely considering adding the 8" to my arsenal with my tax refund. Great Photography, as well! I also think you may be a neighbor to me, a few miles North!The 8” has quickly turned to my favorite blaster. It’s a giggle gun to say the least. Where abouts are you?
Sent from my iPhone using Tapatalk
Post by: Mr_5lade on February 13, 2020, 12:01:38 PM
Here’s mine...
(https://uploads.tapatalk-cdn.com/20200210/9fe7a4fccbc41ff8f7607fecf40360e2.jpg)
(https://uploads.tapatalk-cdn.com/20200210/474c629acbd3fd7d6a12be4d2365c481.jpg)
The Wolverine suppressor looks right at home. Sweet setup!
Sent from my iPhone using Tapatalk
Thanks bro! She’s definitely a looker. I‘m going to be modifying a new gas hole because she’s over gassed suppressed.
Sent from my iPhone using Tapatalk
Post by: romukom on February 26, 2020, 06:50:51 PM
(https://i.imgur.com/nRyfEeC.jpg)
Post by: Mr_5lade on March 04, 2020, 05:40:39 PM
Here is the latest form of my 805.
(https://i.imgur.com/nRyfEeC.jpg)
Love the color contrast
Post by: romukom on March 05, 2020, 12:00:35 AM
Post by: Mr_5lade on March 05, 2020, 12:12:25 AM
Thanks. I wish that I could take great pictures like the one you posted. My 805 was never intended to be two tone at the beginning. I got inspired when I could not get the acr stock in black.Thanks brother. I took about 100 shots and got a few good ones haha. Yeah I definitely dig the two tone. Do you have an Instagram? If you do, add me if you want @mr_5lade
Sent from my iPhone using Tapatalk
Post by: PorterN on March 20, 2020, 08:05:08 PM
Post by: rbuzz00 on April 01, 2020, 08:11:05 PM
To me the size and balance is perfect. With the 11" barrel, it's not too short and it's not too long. It's short enough for close combat usage and still long enough for those longer shots.
CZ Bren 2 Ms 11"
Sig Sauer Romeo 8T
EoTech G33 Magnifier
Dan Haga ACR Adapters
Strong Arm Brace
(https://i.imgur.com/HMpXU1Y.jpg)
(https://i.imgur.com/TLSIYN4.jpg)
Post by: timewaster1700 on April 09, 2020, 05:36:30 PM
Post by: wags68 on April 09, 2020, 06:25:44 PM
5.56 NATO, 14" Barrel, 16" with Pinned Dead Air Brake
(https://i.imgur.com/skkhG3c.jpg?1)
Post by: Prudii on April 19, 2020, 01:36:44 AM
(https://i.imgur.com/mrFoGC8.jpg)
Post by: Scorepion on May 14, 2020, 08:36:59 AM
- Meopta ZD 1-4x22
- Scalarworks 1.57" mount
- Green Precision Custom fit CNC throw lever (https://www.greenlightprecision.com)
- HBI Trigger
- Magpul ACR
- Dan Haga Design ACR Adapters
- Strong Arms Brace
(https://i.imgur.com/G6QVvxp.jpg?2)
(https://i.imgur.com/64NkJ6D.jpg?1)
Post by: Mtb1083 on June 01, 2020, 07:19:50 PM
(https://i.imgur.com/VpVLtEi.jpg)
Post by: mrvip27 on June 04, 2020, 01:17:51 AM
Post by: PorterN on June 06, 2020, 03:08:10 AM
Post by: Scorepion on June 06, 2020, 11:43:19 AM
Post by: PorterN on June 07, 2020, 08:21:17 PM
8) Nice pic
thank you - it was a fun day at the range, for sure!
Post by: scotheocelot on June 23, 2020, 08:04:09 PM
(https://uploads.tapatalk-cdn.com/20200624/5add0d90d3195c39c1715f190fe314fe.jpg)
Sent from my iPhone using Tapatalk
Post by: czfanatic_ on June 24, 2020, 03:26:49 PM
FINALLY....... after a 10 Month wait.What is that on the end of your strongarm brace?
(https://uploads.tapatalk-cdn.com/20200624/5add0d90d3195c39c1715f190fe314fe.jpg)
Sent from my iPhone using Tapatalk
Sent from my SM-N950U using Tapatalk
Post by: scotheocelot on June 24, 2020, 08:12:41 PM
A small piece of heat shrink. The Velcro would fall out periodically. The heat shrink helps keep the velcro inside until I am ready to deploy it.FINALLY....... after a 10 Month wait.What is that on the end of your strongarm brace?
(https://uploads.tapatalk-cdn.com/20200624/5add0d90d3195c39c1715f190fe314fe.jpg)
Sent from my iPhone using Tapatalk
Sent from my SM-N950U using Tapatalk
Sent from my iPhone using Tapatalk