The Original CZ Forum
ARCHIVES => CZF ARCHIVES II => Topic started by: ClarkstonCZ on August 04, 2010, 08:30:24 PM
-
Hello guys and gals.
It's nice to see all of the CZs being bought this Summer, so I thought it might be helpful to create
a place for holster pics, and related carry gear.
I'll start first.
(http://img.villagephotos.com/p/2004-11/897801/HNR-24.jpg)
Maker: High Noon Holsters
Model: Slide Guard- CZ 2075 RAMI
Material: Horsehide in natural finish.
(http://img.villagephotos.com/p/2004-11/897801/HNR-Back-2.jpg)
HN's Double Take magazine pouch in natural finish.
(http://img.villagephotos.com/p/2004-11/897801/HNR-Mag.jpg)
Comment: Fast, but secure for all day wear.
Most comfortable holster I've ever worn!
----------------------------------------------------------------------------------------------
(http://img.villagephotos.com/p/2004-11/897801/HN-PCR1.JPG)
Maker: High Noon Holsters
Model: Under Taker -CZ Compact Pistols
Material: Horsehide in natural finish
Comment: Very comfortable way to carry for all day wear or that quick trip to Wal-Mart.
Same extreme quality and craftsmanship as other HN products.
---------------------------------------------------------------------------------------------------------
(http://i28.tinypic.com/302mhbt.jpg)
Maker: High Noon Holsters
Model: TOPLESS -CZ Compact P-01/P-06
Material: Horsehide in natural finish
(http://i30.tinypic.com/ftge1u.jpg)
(http://img.villagephotos.com/p/2004-11/897801/HN-Snake-2.jpg)
(http://i35.tinypic.com/25f64o9.jpg)
Comment: Will also fit PCR and CZ Compacts, ect.
Secure, but easy to draw from, even with the slightly wider P-06.
--------------
I hope you like this so far. I'll be posting P-07 duty and other holster pics later on.
KEV
-
Looking forward to seeing the P-07 holster. I've got one from High Noon (a slide guard) that should be arriving soon (at least I hope it's soon).
-
Hold onto your socks!
(http://i204.photobucket.com/albums/bb26/czrami/High%20Noon-P-07%20Duty/HNB-4.jpg)
(http://i204.photobucket.com/albums/bb26/czrami/High%20Noon-P-07%20Duty/HNT-REAR-2.jpg)
(http://i204.photobucket.com/albums/bb26/czrami/High%20Noon-P-07%20Duty/HNB-1.jpg)
(http://i204.photobucket.com/albums/bb26/czrami/High%20Noon-P-07%20Duty/HNT-2.jpg)
(http://i204.photobucket.com/albums/bb26/czrami/High%20Noon-P-07%20Duty/hignoontarg.jpg)
Maker: High Noon Holsters.
Model: Slide Guard- Black cowhide for CZ P-07 Duty
Comment: Easy to break in, superb comfort and performance for carry of a service sized pistol.
-
Mula ng mabili ko ang CZ 75 ko two yrs ago di pa ako nag kakaroon ng holster na original kagaya ng na post ninyo na mga pictures. Saan ko ba mabibili yan? puydi ba akung mag order dito sa net? Babayaran ko nalang thru the bank? Gusto ko leather outside black holster. Please help me. Maraming salamat.
-
(http://i918.photobucket.com/albums/ad24/ca_dunn/DSCN7809.jpg)
-
I made this during the summer for my son's CZ Vz 82. I fired his and loved it, so I got one for Christmas . . . just haven't had time to start a holster for mine,yet.
(http://i1237.photobucket.com/albums/ff470/Hayfield123/CZ-82frontwithpistolin.jpg)
(http://i1237.photobucket.com/albums/ff470/Hayfield123/CZ-82front.jpg)
-
Thanks - my son says he prefers it to the ones he bought - but it could be he is being nice to the old man to guarantee he gets my guns when I kick off!
-
He'll not get my Scotch . . .(actually, I prefer 12 year old Jameson's) because I'll finish it off before I croak! I stopped smoking so the Cubans are all gone . . . the gun safe . . . its full, so, yeah, that is probably what he has his eye on! :D
-
This is a holster I make It is my PCR in my IWB holster
(http://i146.photobucket.com/albums/r270/coilguy/CZholster.jpg)
It works great it fits very nice and it conceals
I made some for my friends too. Here is what I did over Christmas
3 CZ's a Witness a kahr a Glock and 2 Rugers
(http://i146.photobucket.com/albums/r270/coilguy/holsters.jpg)
RCG
-
Good looking holsters! I just ordered a pair of c-clips with the thought of making a "tuckable" IWB. Are yours kydex or leather? I plan to use leather for the part that is frequently done in Kydex.
-
Those are kydex back with leather. The Kydex makes reholstering much easier IMHO. I made the clips too.....after a few I had to toss out it became very easy to make them.
RCG
-
recoilguy.....nice holsters, just curious is that horsehide your using? and if so where do you get it from? also what type of metal do you use for the clips?
-
hey hey thanks for the info...must have missed that day in biology!! ::)
-
recoilguy.....nice holsters, just curious is that horsehide your using? and if so where do you get it from? also what type of metal do you use for the clips?
Nope not Horsehide.....cowhide from the local Tandy leather store but you can get horsehide Horse leather (http://www.brettunsvillage.com/leather/sides.htm) here.
The metal is chicago screws. It takes some time and patience and a few failures. After a while they just keep getting better. I really like making them now.
RXG
-
recoilguy is absolutley right - my first attempt actually worked . . . but looked terrible. Every try got dramatically better - to the point that I am proud of what I now make, enjoy the process, and expect the next to be even better, thanks to advice I got from Shadow Warrior in another thread (thanks, Shadow W!) If I can do it, it isn't rocket science!
-
Shadow Warrior, there are lots of Tandy Leather Store out there - and if the one I went to near Baltimore is any indication, they are what you remembered. The folks were great and very helpful - and they had (almost) everthing I needed. I am still experimenting with harware to hang straps on IWBs, since straps wear out and will probably need replacing before a holster wears out! Here is their web presence: Tandy Leather (http://www.tandyleatherfactory.com/)
-
Here's my SP01 and Texas Strongside from Kirkpatrick
(http://www.hunt101.com/data/500/medium/DSC004423.JPG)
-
Really beautiful . . . wish I could get that kind of definition in the ones I make. The must have molds to do the wet forming.
-
recoilguy is absolutley right - my first attempt actually worked . . . but looked terrible. Every try got dramatically better - to the point that I am proud of what I now make, enjoy the process, and expect the next to be even better, thanks to advice I got from Shadow Warrior in another thread (thanks, Shadow W!) If I can do it, it isn't rocket science!
Getting old stinks because it wreaks havoc with memory! I somehow confused Shadow Warrior and Wastelander in this post . . . Wastelander has profided me with lots of great info on holster-making, in particular on stitching technique, so it was to him I owed the thanks!
-
Really beautiful . . . wish I could get that kind of definition in the ones I make. The must have molds to do the wet forming.
They do. This was the first one they'd ever done for a SP01. I had to wait until they'd gotten a Shadow to make the molds off of.
-
I won this in the Range Holster Giveaway that CZ Forum member "Wastelander" was kind enough to run this Christmas. It is for my CZ 82.
(http://i1237.photobucket.com/albums/ff470/Hayfield123/WastelandRange1.jpg)