The Original CZ Forum

CZ PISTOL CLUBS => Compact CZ 75s => Topic started by: armoredman on September 25, 2010, 10:04:39 AM

Title: What holsters fit the P-01?
Post by: armoredman on September 25, 2010, 10:04:39 AM
High Noon Holsters makes some fine P-01 leather, http://highnoonholsters.com/ (http://highnoonholsters.com/)
Hazel Leather makes some outstanding custom stuff, when he comes back online.
HBE made some very nice rigs, no idea if he's still in business.
I also use a Bianchi M-100 inside the waistband clip on, sized for the Glock 19, that fits the P-01 just fine.
Galco lists some rigs for the P-01. http://www.usgalco.com/HolsterPG1.asp (http://www.usgalco.com/HolsterPG1.asp)
Title: Re: What holsters fit the P-01?
Post by: higgite on September 25, 2010, 11:34:06 PM
Comp-Tac  http://www.comp-tac.com/index.php (http://www.comp-tac.com/index.php)
Tucker  http://rlcompanyusa.stores.yahoo.net/index.html (http://rlcompanyusa.stores.yahoo.net/index.html)
Title: Re: What holsters fit the P-01?
Post by: CZ75BRocks on September 26, 2010, 09:03:23 AM
Safariland 528-183-61 (RH)  my favorite, pancake and very flat against your body
              528-183-62 (LH)
Galco       H519-T
Title: Re: What holsters fit the P-01?
Post by: DABCZp07 on September 26, 2010, 07:49:10 PM
I have a Galco Combat Master... fits right but doesnt have the protection for the decocker.. nice holster for the P01
Title: Re: What holsters fit the P-01?
Post by: Gert B Frobe on October 06, 2010, 02:39:04 AM
I have this one:  http://www.comp-tac.com/product_info.php?products_id=102 (http://www.comp-tac.com/product_info.php?products_id=102)  The comp-tac minotaur spartan for the p-01, wear it about 4 oclock and it fits perfect.   After a while, you don't even know its there.  Plus, it fits my cz75b also. 

Very happy with it.

Gert
Title: Re: What holsters fit the P-01?
Post by: AllAWD on October 15, 2010, 02:30:25 PM
Kramer will also do one, even though it's not listed on the chart.
Title: Re: What holsters fit the P-01?
Post by: cz-florida on October 29, 2010, 07:10:33 PM
Nice referral on the Minotaur Spartan; it is just what I've been looking for.  Christmas may be early this year. 
Title: Re: What holsters fit the P-01?
Post by: wade-19 on November 15, 2010, 10:38:37 PM
I just stuck my PO-1 in my VMII that is made for a Glock 19. It fit perfectly !
Title: Re: What holsters fit the P-01?
Post by: hewie38 on December 24, 2010, 07:06:23 PM
Does anyone happen to know if the Galco King Tuk will fit the p 01.  It liiks like a good cross breed between leather and kydex.  If anyone has ne input all advice is accepted.  Thanks
Title: Re: What holsters fit the P-01?
Post by: NYCZREP on December 28, 2010, 03:21:53 PM
My G17 holster from Aker Leather fits fine as well!
(http://i163.photobucket.com/albums/t313/fal76251/P01.jpg)
Title: Re: What holsters fit the P-01?
Post by: AllAWD on December 29, 2010, 09:54:36 AM
Does anyone happen to know if the Galco King Tuk will fit the p 01.  It liiks like a good cross breed between leather and kydex.  If anyone has ne input all advice is accepted.  Thanks

Comp-Tac makes a similar MTAC leather/kydex hybrid that came before the king tuk specifically for the P01.  My dad owns a couple and loves them.

I got this offer from Comp-Tac: "Starting today, December 28th until Friday, December 31st enter code EOY-1210 in the redeem box when checking out to save your 10%!"

The other hybrid option is Crossbreed, which I have no personal experience with, but have many loyal customers.  To me ,the king tuk is a copy of crossbreed's holster.
Title: Re: What holsters fit the P-01?
Post by: OkieDokie1982 on February 01, 2011, 04:03:10 PM
I've been thinking about the crossbreed for my P-01.  Does anyone have any experience with this IWB holster?
Title: Re: What holsters fit the P-01?
Post by: recoilguy on February 01, 2011, 05:55:06 PM
Crossbreed is a good holster. I use a holster that is a crossbreed style holster. (not Crossbreed but made like one) and it work great. Hides the gun and is very comfy. You will like a crossbreed

RCG
Title: Re: What holsters fit the P-01?
Post by: soulfresh on February 08, 2011, 05:00:20 AM
i just recently bought a TLR-1 for my cz p01.

is there a holster to carry a p01 with the tlr-1 attached? preferably for open carry. thanks  ;D

anyone?
Title: Re: What holsters fit the P-01?
Post by: P01monster on April 12, 2011, 10:18:28 PM
I found a retention holster similar to the Serpa.  It's made by iTac Defense.

http://itacdefense.com/ShowProductDetails.aspx?ProductID=66&CategoryID=331 (http://itacdefense.com/ShowProductDetails.aspx?ProductID=66&CategoryID=331)

They have two versions, the 75 and 75B.  One has 'fins" to fill the void from not having a rail and one is open for the SP-01 or P-01 rail guns.  I bought both.  I cut the fins out of the 2nd one so it would fit my SP-01 with my swiss army knife, was easy and cleanly done.  Then I shortened the other one to fit my P-01.  They are about $25 each and work for range holster or when wearing a coat.  They stick the butt of the gun out so it doesn't conceal well.  Quality is good.  This companay makes the holsters that SIG sells as their factory gear.

Title: Re: What holsters fit the P-01?
Post by: Mountain Walker on July 22, 2011, 06:24:07 AM
Both KHolster and Theis Holster make excellent concealment hybrid holsters. They are like the Crossbreed Super Tuck, but much cheaper and a little better quality. Both companies are very reputable and offer a nice selection.

http://theisholsters.com/index.php (http://theisholsters.com/index.php)

http://www.kholster.com/ (http://www.kholster.com/)
Title: Re: What holsters fit the P-01?
Post by: SAINT on September 05, 2011, 08:31:06 PM
Fitted my P-01 with a Model 55BN (black) from Milt Sparks Holsters Inc., Boise, Idaho.  Would have included a picture...but the attachments feature is not enabled on my user account.
Title: Re: What holsters fit the P-01?
Post by: atilla on September 05, 2011, 11:06:33 PM
Just picked up a CompTac Minotaur for the P01. I am familiar with the Minotaur (for my M&P and SigP239) platform and actually prefer it ( IWB ) over an OWB even when open carrying or in a tactical shoot. It took longer for me and the P01 to get accustomed to the Minotaur, I think that big bulky light rail might be an issue (maybe I should have went with the PCR?). Anyway, the holster is P01 specific and after playing with the retention screws and many many practice draws, I can say it is a great carry set-up. One more trip to the range plus an advanced handgun shoot next Saturday and the P01 in the Minotaur will be in the carry rotation full time. That will give me 800+ rounds plus the tactical/practical to bring me, the P01, and the holster all up to speed.
$85 + $9 shipping in 3 days direct from Comp-Tac.
Title: Re: What holsters fit the P-01?
Post by: armoredman on September 24, 2011, 08:23:36 PM
CZ-USA is advtertising an inexpensive shoulder rig that fits P-01, PCR and COmpact, might get one to see how well it works. :)
Title: Re: What holsters fit the P-01?
Post by: atilla on October 01, 2011, 08:04:34 PM
I posted there pics elsewhere, but this is the appropriate thread. After a few weeks, the Minotaur is working very well with both the RAMI and P01. The kydex body is specific to the P01, but the RAMI fits, retains and draws/reholsters just as well, and conceals better under a t-shirt.

(http://i293.photobucket.com/albums/mm55/mrmott_2008/CZ75P01inMinotaur.jpg)

(http://i293.photobucket.com/albums/mm55/mrmott_2008/RAMIinMinotaur.jpg)
Title: Re: What holsters fit the P-01?
Post by: Vegas-Shooter on October 28, 2011, 01:43:32 AM
The problem with the Comp-Tac is that they don't extend the leather to cover the beavertail that pokes me in the side. I have to adjust the cant very forward to avoid that. I am trying to fin a holster that shields my side from the sharp beavertail.

I emailed theis holsters and they said their holsters cover the beavertail with their sweat guard. I am going to either order from them or a local guy that makes them to order.
Title: Re: What holsters fit the P-01?
Post by: drscooter on November 10, 2011, 04:10:42 AM
i just recently bought a TLR-1 for my cz p01.

is there a holster to carry a p01 with the tlr-1 attached? preferably for open carry. thanks  ;D

anyone?

Yes, it's made for a Glock I think. I know this is an "old" question but I do have one for my PO1 with a TLR-2 it is a outside belt holster. The fit is very good, however, the hammer must be ALL the way down for the thumb snap. I will post the model and information when I get home.
Title: Re: What holsters fit the P-01?
Post by: mkd on November 10, 2011, 07:27:46 AM
vegas!just order a high noon slide guard holster thar has the inside shield to protect the decock,slide,and beavertail from rubbing or digging into the body.i looked for 3 days on the internet before i decided this was the one i purchased. i ordered a black  cowhide lined.                                                     http://www.highnoonholsters.com/Product_Line/_Slide_Guard/_Rear_Slide_Guard/_rear_slide_guard.html
Title: Re: What holsters fit the P-01?
Post by: drscooter on November 10, 2011, 07:26:25 PM
The one I have for the TLR-2/PO-1 is made by Bianchi Model 90 for a Glock 19, the fit is very good.

https://www.usconcealedcarry.com/reviews/holsters/bianchi-introduces-the-model-90-vision-holster/
Title: Re: What holsters fit the P-01?
Post by: Mountain Walker on November 18, 2011, 04:28:11 AM
Kholster will make a crossbreed type holster for $50 delivered and the unit is superior to crossbreed in my experience.
Title: Re: What holsters fit the P-01?
Post by: recoilguy on November 18, 2011, 11:10:03 AM
What is your experiance that leads you to the conclusion the Kloster is superior to the X Breed?

Is it just that it is less money? I have a Cross breed and as far as I can tell it is a very quality made holster.

I also have many other holsters, many. here are a few, not all Xbreeds either. All very high quality.

(http://i146.photobucket.com/albums/r270/coilguy/holsters.jpg)

None are Klosters tell me what makes you think they are superior I might give one a try.

RCG

Title: Re: What holsters fit the P-01?
Post by: th3ug1y0n3 on November 18, 2011, 04:07:59 PM
Personally i think that the Kholster backing is way to round.  I don't care to have a moon on my side
Title: Re: What holsters fit the P-01?
Post by: CPTKILLER on December 20, 2011, 10:13:58 PM
This small shop just west of Fort Worth makes a nice series of holsters including CZ's.

http://www.dmbullardleather.com/GunList.html

This is their gun list that includes CZ's.

CZ 75,83,85
CZ P01,SP01
CZ P07
CZ 2075 Rami 3"

The entire list is in this document.

http://www.dmbullardleather.com/GunList.html
Title: Re: What holsters fit the P-01?
Post by: blaster49 on March 14, 2012, 02:58:57 PM
A Bianchi Accumold paddle holster model  7500 part# 18814 fits great and is very comfortable. Goes for about $50.
Title: Re: What holsters fit the P-01?
Post by: boomstick on March 14, 2012, 03:09:12 PM
Just wanted to chime in,
I found a Don Hume H721 OT NO. 30-1
Says on the package it was for a sig P229
Fits my P01 perfect! $29 at Jensen Arms Loveland CO
Ill try to send pics
Title: Re: What holsters fit the P-01?
Post by: boomstick on March 14, 2012, 03:55:08 PM
Not sure if this worked for pics but here ya go


http://img15.imageshack.us/img15/1537/imag0025xl.jpg
http://img824.imageshack.us/img824/1231/imag0026eb.jpg
http://img842.imageshack.us/img842/4826/imag0027tj.jpg
http://img802.imageshack.us/img802/8351/imag0012m.jpg
Title: Re: What holsters fit the P-01?
Post by: dee_nos on March 16, 2012, 05:15:53 PM
is just ordered a falco holster 33s for my p0-1. i don't know much about this company or their holsters. i'll report back once i have received it.
Title: Re: What holsters fit the P-01?
Post by: Ripped4rce on March 16, 2012, 11:04:06 PM
Just ordered a fobus evolution 2 holster will let you know what I think when I get and I will try to post pics asap. Its on backorder but said should get it soon (2 weeks)
Title: Re: What holsters fit the P-01?
Post by: Ripped4rce on March 22, 2012, 07:39:00 PM
FOBUS E2 HOLSTER is on backorder. Optics Planet said eta to them is prob End of March. We'll see...
Title: Re: What holsters fit the P-01?
Post by: Ripped4rce on April 05, 2012, 01:44:01 AM
Fobus evolution holster still on back order they told me another 7-10 days yesterday. So I also ordered a desantis insider which optics also sent me a message telling me its on hold. Geez whats going on we are not only experiencing gun shortages b4 this election but also holster shortages? I ordered both of these through Optics planet, they need to put inventory status on all their products, this pretty simple in terms of online ordering. Well after calling and finding out the bad news of the unavailability of the holsters for another week or so. I ordered a Galco summer comfort for p229 thats suppose to fit quite well, they had in stock and according to ups eta is Friday by the afternoon. I also ordered some new grip screws made by Hogue after seeing mine starting to rust. I ordered two sets one in stainless and another in a blackened stainless.
I will post pics and comment on all my products as they arrive.
Title: Re: What holsters fit the P-01?
Post by: jackmichael on April 05, 2012, 05:57:21 AM
Is there a particular CZ 75 P-01 holsters that can also accommodate a fitted M6 light & laser on the pistol?  I am still trying to find a more sub-compact light & laser for the said P-01.

Thanks and hope to hear from the group.
Title: Re: What holsters fit the P-01?
Post by: Ripped4rce on June 06, 2012, 03:56:14 PM
Just got my Evolution holster (SWMP) about ten days ago. I have also bought a galco summer comfort (SUM251B) and a Desantis  insider leather hoslter  (031BBB6Z0). First of all it took about 3 months for the evolution left handed to come back in stock at optics planet. I am a lefty so finding holsters at a reasonable price is next to impossible for this gun, so I bought the other two in the interim. All 3 of these holsters are reasonable or better in price, are comfortable or at least tolerable for extended carry (more than an hour and both sitting and walking) and durable to some extent. The Galco is my favorite for concealability and it wins in looks hands down. The Evolution beats out the Galco in extended or all day wear comfort but is not as easy to conceal. The insider is a great holster for the price. I don't think its comfortable for extended wear of much more than a few hours as deep concealment design allows the beavertail to rub on you a bit much(pulling the elastic of your boxer shorts above where the beaver tail touches your skin helps) but at 20 something dollars and it being leather you can't complain. Now I also have the insider for my kimber ultra and Kahr and it works fantastic. I think the insider design works best for smaller guns(under 4") expecially ones without beaver tails. If I had to pick just one hoslter, it would have to be the Galco but only b/c its more concealable. It is also the most handsome of the 3 and the leather and craftsmanship is top. The evolution is more comfortable and more durable being kydex and a paddle holster but again unless you are planning to wear a coat or a large button shirt it will print alot more. The Desantis  is actually even more concealable than the Galco but the wear comfort is just not there. Hope this helps and I will post pics when I go home later of all the holsters. I also have a pair of half check coco grips and stainless screws on the way from cz custom. I love this pistol. Its the first gun that I have actually desired to customize as oppose to saving the money and using towards another purchase, now I am also working on my kimber ultra getting meprolights and new grips installed.
Title: Re: What holsters fit the P-01?
Post by: Ripped4rce on June 11, 2012, 02:12:48 PM
Here you go..up first is the Fobus then the Galco followed by the desantis. Enjoy  ;).

(http://[URL=http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action-view&current=IMG_0893.jpg][IMG]http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0893.jpg)[/URL]
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_fobus1.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=fobus1.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_fobusevo2.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=fobusevo2.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_fobusevo4.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=fobusevo4.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0900.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0900.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0892.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0892.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0890.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0890.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0889.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0889.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0887.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0887.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0896.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0896.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0894.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0894.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0897.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0897.jpg)
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0898.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0898.jpg)[/img]
Title: Re: What holsters fit the P-01?
Post by: Ripped4rce on June 11, 2012, 03:36:55 PM
Not sure but I think I didn't have the p01 one fully seated in the evolution in some of if not all the pics. I readjusted it and here some fresh angles
(http://[URL=http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action-view&current=IMG_0920.jpg][IMG]http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0920.jpg)[/URL]
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0921.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0921.jpg)[/img]
Title: Re: What holsters fit the P-01?
Post by: Ripped4rce on June 11, 2012, 03:47:48 PM
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0920.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0920.jpg)


Special Thanks to Zoe at CZ Custom for sending me these beautiful grips, I couldn't have picked out prettier ones. I am almost scared to handle it now...almost.  ::) 
Title: Re: What holsters fit the P-01?
Post by: darkmany on June 22, 2012, 05:07:47 AM
like it. ;)
Title: Re: What holsters fit the P-01?
Post by: DirtyHagy on July 24, 2012, 10:38:34 PM
Black Hawk Check Six holster #420707BK-R.  Supposed to be for a SIG 228/229.  Fits my PO-1 Just fine.  Retention and comfort is great as well.

(http://i1112.photobucket.com/albums/k500/jjagonase/2012-07-24_07-16-45_23.jpg)
Title: Re: What holsters fit the P-01?
Post by: mkd on July 25, 2012, 06:40:56 AM
here's an update pic of the high noon slide guard i bought last fall.was real tight at first but has broken in real well in relatively short useage.am very happy with it  so far.also very happy with the a & g leather gun  belt.                                                                                           (http://i29.photobucket.com/albums/c299/mkd55/IMG_0941.jpg)                                                      (http://i29.photobucket.com/albums/c299/mkd55/IMG_0945.jpg)
Title: Re: What holsters fit the P-01?
Post by: Briggs on August 17, 2012, 07:58:57 AM
I have just ordered a holster for my P-01 from Falco Holsters..... eerily close to Galco....  I will be happy to post pictures as soon as the item arrives. I'm hoping I have not fallen for some scam, but as I have had friends order Falco Holsters and they have been happy with the product, I decided to go ahead and give them a try. I went with their black leather shoulder rig with two extra mag pouches. At $109 I thought it was a good deal, especially considering the holster can be removed from the shoulder rig and used as an OWB carry. I hope this has helped anyone looking for a holster.
Title: Re: What holsters fit the P-01?
Post by: P01 Shooter on September 02, 2012, 07:08:54 PM
I found a Blackhawk size 08 nylon holster at Wally World for $13 that fits my P01 with a LaserMax Micro perfectly.

(http://www.blackhawk.com//CatalogImages/18-958-IMG1.jpeg)
Title: Re: What holsters fit the P-01?
Post by: spicyramen on September 14, 2012, 04:47:23 PM
(http://i1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/th_IMG_0920.jpg) (http://s1066.photobucket.com/albums/u415/Ripped4rce/CZ%20PO1%20holsters/?action=view&current=IMG_0920.jpg)


Special Thanks to Zoe at CZ Custom for sending me these beautiful grips, I couldn't have picked out prettier ones. I am almost scared to handle it now...almost.  ::)


Do you think the hard plastic material would wear it down fast?
Title: Re: What holsters fit the P-01?
Post by: 777TRUTH on November 10, 2012, 04:09:52 AM
Purchased the Galco Miami Classic II (MCII224) which fits the Glock 19, 23 etc.

Fit's like a glove, retention and comfort-ability  is excellent. Galco can be tough to break in, place the P-01 in a couple of plastic bags, place it in holster and tighten retention screw. After a few days loosen retention screw and the P-01 will be easy to draw. To make it easier and or faster to break in wrap gun in wax paper and draw and reholster a couple of times.

I have Moprolight NS's on my P-01, you may want to remove a small amount of leather around the sights if this bothers you, otherwise it will break in on it's own and has no negative effect or draw or reholstering.

Not much needs to be done for the magazine carrier since the Glock mags are thicker than the CZ's. Just place mags in the carrier and tighten retention screw, works great!
Title: Re: What holsters fit the P-01?
Post by: boomstick on December 03, 2012, 10:50:28 PM
com tac looks perfect!
Title: Re: What holsters fit the P-01?
Post by: hyperbole on January 19, 2013, 12:21:05 AM
I'm happy with the Galco Summer Comfort holster. It's an IWB holster influenced by the classic Milt Sparks design. I believe it is the FBI cant of 15 degrees. It doesn't have a guard between the gun and wearer but I haven't noticed any moisture transferring. I prefer snapping belt loops over a clip. On most of the trousers I wear I can comfortably place a belt loop between the two leather loops of the holster for added stability.

http://www.usgalco.com/HolsterPG3.asp?ProductID=3607&GunID=327
Title: Re: What holsters fit the P-01?
Post by: Ontime on January 27, 2013, 01:23:32 PM
Believe it or not, I found the Tommy Theis hybrid IWB for my XDM 45 3.8 fits my p01 perfectly
Title: Re: What holsters fit the P-01?
Post by: manhairetis on January 28, 2013, 02:10:42 AM
Vega FB 120
Title: Re: What holsters fit the P-01?
Post by: valle07 on February 14, 2013, 01:08:30 PM
Has anybody tried the Desantis Intruder IWB? I am curious if the P01 will fit the holster. I might just order it to try it. Feedback would be fantastic.

http://www.crimsontrace.com/products/type/rail-master/81-1119
Title: Re: What holsters fit the P-01?
Post by: UBB on May 21, 2013, 01:19:33 PM
Desantis scabbard for the G19 works very well IMO for those looking for a leather OWB holster.

Model # is 002B6
Title: Re: What holsters fit the P-01?
Post by: Blue9 on June 07, 2013, 09:50:49 PM
Gotta give massive props to theis holsters! I just received the horsehide IWB and it conceals the P01 very well. I rocked it today in cargo shorts and a 5.11 button up. This holster conceals the P01 as well as my desantis sof-tuck conceals my M&P Sheild. Those pistols are not even close to the same size, but it shows what a quality holster can do.

I can highly recommend Theis IWB holsters
Title: What holsters fit the P-01?
Post by: BixBix78 on June 07, 2013, 10:37:18 PM
I'm in the market too it looks like OldFaithful Holsters has the p01 now.

http://oldfaithfulholsters.com/shop/category/cz-p01/ (http://oldfaithfulholsters.com/shop/category/cz-p01/)
Title: Re: What holsters fit the P-01?
Post by: ramsa on June 15, 2013, 11:44:51 AM
Just got a Fobus Concealement Elite that works great, and a deal on a Safariland 070 Level 3 mid-ride in basketweave that is drop-dead beautiful, but VERY tight. I like 'em both, but the Safariland needs to be lubed and broken in...
Title: Re: What holsters fit the P-01?
Post by: Hawkingcolorado on November 13, 2013, 04:27:04 PM
Will a Blade tech "Revolution"  fro a Glock 19 fit a CZP01?
Title: Re: What holsters fit the P-01?
Post by: chrish2 on November 14, 2013, 10:07:58 PM
Hey folks, just thought I'd pass this on for anyone looking for an OWB holster and not particularly for concealed carry either.

I just picked up a Comp-Tac International for my P-01 along w/ two of their TekLok single mag holders.  Gun fit perfectly.  Had a bit of a binding issue out of the box, gun would not draw smoothly due to the top of the slide being a bit tight in between the kydex, even with the retention pretty loose.  After examining it, just seemed to be the shape of the kydex along the top of the slide, it was pinching.  Just wrapped the top of the slide with an index card, inserted, heated it up for a bit with a hair dryer (maybe 5-10 minutes) and then let it cool.  Draws smooth as butter now.

Anyway, good rig IMO for competition or just to have an OWB solution.  The International comes w/ both a paddle and belt loop, plus a drop leg mount that can be used with either...so 4 mounting options.  3 cant positions, forward, straight, back.  All in all, pretty happy w/ it.

If anyone wants pics, I can snap a few, but the pics on the comp-tac website are pretty indicative of what you get.
 
Title: Re: What holsters fit the P-01?
Post by: Palmetto2013 on November 29, 2013, 08:17:54 PM
Just picked up one of these on EBAY for 29.95.  Was not expecting much but my P-01 fits perfectly and the slide appears to be really well made.  The pic is from the company website.  It show's some kind of HK pistol but the right hand, large size fits a lot of pistols including the CZ P-01 and the Glock 17, 19 and most other Glocks.

(http://americanprideleather.com/h_images/BS_LG.jpg)

I found this on the companies website

"American Pride Leather Company specializes in holsters and belts, as well as other leather products. We take great pride in the fact that all of our products are made in the USA. We outsource no part of the manufacturing process and the leather we use is American steer hide.

When we refer to "America" we are talking about the "United States of America". We are not referring to North or South America including Canada and Mexico as others do.

For anything to be labeled "Made in the USA", it only needs the final assembly to take place in the US. This allows companies to build products such as holsters overseas or south of the border, ship them here to the States, finish them off and put a tag or stamp on them stating that they're made in the US. Our products are absolutely manufactured with pride, right here in the USA.

http://americanprideleather.com/BeltSlideHolsters.html

Currently listed on EBAY http://www.ebay.com/itm/350936617921
Title: Re: What holsters fit the P-01?
Post by: mikechandler on December 08, 2013, 02:02:55 PM
Since I took photos for other threads, I'll post on here too.

HBE Specialty Leatherworks  (http://www.hbeleatherworks.com/) makes fabulous CZ holsters, including for the P01. I know some customer posted a mud slinging thread about Eric on the CZ forums before, but I think the customer just didn't understand the nature of ordering a holster. Heck, I waited 8 months for Andrew's Leather to send me my 1911 holster. If you have patience, a custom made holster is a great option. If you are the impatient type then go buy something off the shelf. Enough said.

Below is his Com 3 IWB, natural leather CCW holster, with a P01 (yes, it's a P01, it has a comp hammer, robar NP3 steel parts, tactical night sights, aluminum grips, and other mods). It's very comfortable at 5 o'clock carry, with a bullhide belt. There is almost an audible/tactile suction effect as you slide it in, it is such a perfect fit.

(http://i1139.photobucket.com/albums/n546/mikeinchandler/CZP01_08_zps17513c51.jpg)
Title: Re: What holsters fit the P-01?
Post by: Nimdabew on December 15, 2013, 02:28:02 PM
For those interested, I dropped my P-02 off at a company called K-Rounds that makes kydex holsters. They have made a holster for me before and they are really sturdy holsters. They tout that they make their holsters out of real kydex and their prices aren't bad. They made a mold of my gun and they can start making holsters for P-02's with a safety and probably also P-01's since they are the same frame. The sweat guard might be molded for a safety however.

http://www.krounds.com/index.php
Title: Re: What holsters fit the P-01?
Post by: Nimdabew on December 18, 2013, 10:39:56 AM
I picked up my holster yesterday from K-Rounds. The gun hugs my body really well and with the correct sized belt loops, the gun is very stable. The holster makes the gun stick in the holster really well but when you pull, it comes out nicely. They claim to make a 4 or 5 point retention instead of just in the trigger guard. I don't know if it is true or not. I really like it. I would suggest getting a full length sweat guard since I think the safety was digging into my side a little bit or maybe it is just that uncomfortable period where I used to wear leather and now I am back at Kydex. I would buy this holster again.
Title: Re: What holsters fit the P-01?
Post by: Fredward on December 24, 2013, 09:08:57 PM
The Desantis Speed Scabbard for the SIG P239 fits mine like it was made for it.
Title: Re: What holsters fit the P-01?
Post by: ATwistedStaple on January 04, 2014, 05:15:23 PM
Just bought a nylon, ambi duty holster from Blackhawk. Size 6, meant for 3.5 to 3.75" large caliber handguns. Fits the P-01 nicely and was only $30
Title: Re: What holsters fit the P-01?
Post by: Chris B on January 12, 2014, 12:47:25 AM
I found the Tagua OWB designed for the G 19 fits perfectly.  I like the flat inner face too.  Had a few leather holsters, this is every bit as good at half the price.
Title: Re: What holsters fit the P-01?
Post by: jurist on February 02, 2014, 04:06:45 PM
Dan Hume CZ40 holsters perfectly fit the CZ P-02 I have. I also use my GLOCK 17 holster and it fits and retains the pistol, albeit it was a little snug when I first started using it.
Title: Re: What holsters fit the P-01?
Post by: Towns on March 30, 2014, 09:38:41 AM
Old Faithful Holsters sells a hybrid IWB holster specifically for the P-01. 

I ordered one on 3/9 and received it yesterday (20 days later).  I've worn it less than 24 hours, but so far, it is comfortable and should break in even better.  I'm pretty sure some of the other hybrid holster makers do the P-01 as well, such as Crossbreed Holsters and Theis Holsters.
Title: Re: What holsters fit the P-01?
Post by: amada8 on February 12, 2015, 12:55:08 PM
IWB Crossbreed - horse.  very comfortable and stable with a good belt.  3:00 right hip.  Sits low and easy in/out.

Side Guard IWB Double snap - reinforced 15° cant.  very nice product.  Not as comfortable initially.  In/out still needs to loosen up for me.  HOWEVER, if concealment is of primary concern, this holster does a much better job than the CB.
Title: Re: What holsters fit the P-01?
Post by: carnut on February 25, 2015, 01:36:40 PM
White Hat Holsters has OWB and IWB  hybrids for P-01.   $50-$82 range, plus they have 10 rail laser/light options for $5.00 extra... shipping is about $7.00..
Title: Re: What holsters fit the P-01?
Post by: knoxy on March 09, 2015, 12:12:26 AM
Just picked up this IWB holster for my P01:

(http://i.imgur.com/Q7vf2Wel.jpg)

It's made for CZ Compacts. Very rugged leather. Good retention. Cant beat it for $27. After seeing it 1st hand I'm ordering another for my PCR.

Made by a company called Outbags. Found it on amazon:

http://www.amazon.com/OUTBAGS-LOB2S-CZ75C-BROWN-RIGHT-Genuine-Handcrafted/dp/B00NVQXL4W
Title: Re: What holsters fit the P-01?
Post by: ace73 on March 11, 2015, 11:30:53 AM
That looks pretty well made for $27!!!
Thanks, I'll check them out!
Title: Re: What holsters fit the P-01?
Post by: knoxy on March 11, 2015, 02:55:01 PM
That looks pretty well made for $27!!!
Thanks, I'll check them out!

I'm happy with it. I just ordered a black one for my PCR.

The only very minor issue I've found is that the PO1 rear sight sometimes catches slightly when holstering. PCR sights don't have this problem since they have a taper on the front.
Title: Re: What holsters fit the P-01?
Post by: AMM on August 19, 2015, 01:33:23 PM
I am having excellent luck with the Galco Cop 3 Slot w/thumb break.  Have been using it for over a year - I think I finally found "the one" that works best for me for OWB carry of the P-01.  It is Model CTS250B, originally for the SIG P228/229 and Taurus 24/7.  Break-in was a bit extended but now draws smooth - I kept the pistol in a dress sock inside of a ziplock for a week to begin the process... I hope this is of help.

Available from multiple vendors - for example see   <http://www.opticsplanet.com/galco-cop-3-slot-holsters.html> 

Cheers!
Title: Re: What holsters fit the P-01?
Post by: CDKJudoka on August 19, 2015, 04:11:25 PM
Got a new holster today for the P-02. Unfortunately, I will need to send it back since it disengages the safety when I holster it. No bueno!

(http://i109.photobucket.com/albums/n79/DarkPhoenixTSi/TEOTWAWKI/Firearms%20-%20New%20and%20Old/IMG_20150819_1602112_zpsebgkcm6e.jpg) (http://s109.photobucket.com/user/DarkPhoenixTSi/media/TEOTWAWKI/Firearms%20-%20New%20and%20Old/IMG_20150819_1602112_zpsebgkcm6e.jpg.html)
Title: Re: What holsters fit the P-01?
Post by: hyperbole on August 25, 2015, 04:50:10 PM
CZ-USA now has a holster database: http://cz-usa.com/hammer/wp-content/uploads/2014/04/HOLSTER_DATABASE.xls
I'm still happy with the Galco I mentioned earlier for concealed carry.
Title: Re: What holsters fit the P-01?
Post by: CZ Taji on September 08, 2015, 01:08:53 PM
I am having excellent luck with the Galco Cop 3 Slot w/thumb break.  Have been using it for over a year - I think I finally found "the one" that works best for me for OWB carry of the P-01.  It is Model CTS250B, originally for the SIG P228/229 and Taurus 24/7.  Break-in was a bit extended but now draws smooth - I kept the pistol in a dress sock inside of a ziplock for a week to begin the process... I hope this is of help.

Available from multiple vendors - for example see   <http://www.opticsplanet.com/galco-cop-3-slot-holsters.html> 

Cheers!

can you explain the dress sock inside of the ziplock, i haven't the faintest clue. :( thx.
 
 
Title: holsters recommendations for the CZ 75 Compact SDP
Post by: CZ Taji on September 08, 2015, 01:26:18 PM
hI FOLKS,
   Yes, i realise the PO1 is the same basic gun and the Compact SDP version should fit.
with that said has anyone with a SDP, noticed a particular holster that would suit a big guy for OWB
carry ?

 I'm like 5/8" 250 and i need to have a thumb break  type holster because of state law for concealed carry.
I'm all about the comfort, and also i'd like the holster to not ruin the finish of my gun . i rather spend for a durable quality holster for obvious reasons; but function rules regardless of price imho.

i need the same type for my 2nd gen. PO7 too.

what do you big guys prefer for holster placement  3, 4, 5 o'clock or something else. Please tell me why too. btw I'm right handed 

anything that I'm missing on the issue feel free to school the newb, and that goes forever. thx. in advance folks.
Title: Re: What holsters fit the P-01?
Post by: AMM on September 08, 2015, 03:52:35 PM
Quote
can you explain the dress sock inside of the ziplock, i haven't the faintest clue. :( thx.

Sure!  Some holster makers recommend that break-in for a new holster that is tight can be accelerated a bit by placing the UNLOADED pistol in a ziplock, and then leaving it inserted in the holster for a period of a few days.  The Galco I recommended started out very tight and hard to draw, so I first placed the pistol in the thin dress sock, and then placed the ziplock over that. The idea is to provide a bit of controlled stretching of the holster so that it would draw consistently and not be too tight.

I hope this helps clarify, please let me know if further explanation or pictures would be helpful.

Cheers
Title: Re: What holsters fit the P-01?
Post by: CZ Taji on September 11, 2015, 12:31:10 PM
Thanks AMM,
  makes sense to me now. i appreciate the reply especially since i understood it lol.
Title: Re: What holsters fit the P-01?
Post by: Caper on September 12, 2015, 01:26:10 AM
Forgive me if this was mentioned earlier in the thread, but has anyone tried Eric Larsen, owner of H.B.E. Specialty LeatherWorks.  He specializes in concealed carry and CZ holsters.  All custom.  Just got one for my SP-01.  The craftsmanship is superb.  Give him a call at 1 (801) 916-9248.
Title: Re: What holsters fit the P-01?
Post by: hrdguera on September 21, 2015, 04:47:31 PM
I use a Galco Jak-Slide for almost every pistol I have.
Almost, because there are few where the pistol hammer or something else bothers my "Spare Tire" just a bit.
Title: Re: What holsters fit the P-01?
Post by: DamnYankee on November 09, 2015, 04:43:49 PM
Blackdog Concealment makes a nice OWB for the P01.
(http://i172.photobucket.com/albums/w1/bleepYankee1/20151109_163547_zpsyvj1tpy0.jpg) (http://s172.photobucket.com/user/bleepYankee1/media/20151109_163547_zpsyvj1tpy0.jpg.html)
(http://i172.photobucket.com/albums/w1/bleepYankee1/20151109_163117_zps1iqmyvua.jpg) (http://s172.photobucket.com/user/bleepYankee1/media/20151109_163117_zps1iqmyvua.jpg.html)
Title: P-01 fits Kramer IWB for Sig P229R
Post by: bobandmikako on December 29, 2015, 09:41:11 AM
My P-01 fits nearly perfectly in a Kramer #3 IWB made for the Sig P229R.  It fits so well that I've decided to just use it instead of buying another holster for it.  Retention seems just about the same as using the holster with the P229R for which it's made.  I can hold it upside down and it won't fall out but it comes out very smoothly on the draw.  It's not an exact fit, obviously, but it works just fine.

(http://i1063.photobucket.com/albums/t513/bobandmikako/Holsters/IMG_4091_zpst9a5pkxz.jpg) (http://s1063.photobucket.com/user/bobandmikako/media/Holsters/IMG_4091_zpst9a5pkxz.jpg.html)
(http://i1063.photobucket.com/albums/t513/bobandmikako/Holsters/IMG_4093_zps6gfa1vdg.jpg) (http://s1063.photobucket.com/user/bobandmikako/media/Holsters/IMG_4093_zps6gfa1vdg.jpg.html)
(http://i1063.photobucket.com/albums/t513/bobandmikako/Holsters/b1b963f4-5c7c-48a4-8762-a8772ba1f3a6_zpsqmsn6i2w.jpg) (http://s1063.photobucket.com/user/bobandmikako/media/Holsters/b1b963f4-5c7c-48a4-8762-a8772ba1f3a6_zpsqmsn6i2w.jpg.html)

Title: Re: What holsters fit the P-01?
Post by: SR22PSHOOTER on April 03, 2016, 08:45:38 PM
I really like my CnC Holster:

(http://i1163.photobucket.com/albums/q550/SR22PSHOOTER/2eeec6f6-bdd6-4915-927d-bfebcf916227_zpsjo8m5bgq.jpg) (http://s1163.photobucket.com/user/SR22PSHOOTER/media/2eeec6f6-bdd6-4915-927d-bfebcf916227_zpsjo8m5bgq.jpg.html)

(http://i1163.photobucket.com/albums/q550/SR22PSHOOTER/IMG_20160402_215551_zpsyco4avcr.jpg) (http://s1163.photobucket.com/user/SR22PSHOOTER/media/IMG_20160402_215551_zpsyco4avcr.jpg.html)

(http://i1163.photobucket.com/albums/q550/SR22PSHOOTER/abf1a236-3b87-44cc-92a7-fd18b6c43fb8_zpse5wmj63z.jpg) (http://s1163.photobucket.com/user/SR22PSHOOTER/media/abf1a236-3b87-44cc-92a7-fd18b6c43fb8_zpse5wmj63z.jpg.html)

(http://i1163.photobucket.com/albums/q550/SR22PSHOOTER/daf22ad6-3e32-4414-ac04-0a02bed007f1_zpshxsoefyi.jpg) (http://s1163.photobucket.com/user/SR22PSHOOTER/media/daf22ad6-3e32-4414-ac04-0a02bed007f1_zpshxsoefyi.jpg.html)

(http://i1163.photobucket.com/albums/q550/SR22PSHOOTER/2f6faab8-a9fa-4ded-bd26-2bf76b4c6040_zps2y5gxvfy.jpg) (http://s1163.photobucket.com/user/SR22PSHOOTER/media/2f6faab8-a9fa-4ded-bd26-2bf76b4c6040_zps2y5gxvfy.jpg.html)
Title: Re: What holsters fit the P-01?
Post by: crand16 on April 27, 2016, 03:19:24 PM
Cool how the holster pattern and grips match on the CNC holster!
Title: Re: What holsters fit the P-01?
Post by: Low@xis on April 29, 2016, 07:23:55 PM
The P01 fits nicely w/o light in the K-Rounds #2036.
Also, the P01 w/TLR-1 or TLR-1 HL fits nicely in the K-Rounds #2640

I have both and use them both in above mentioned configurations, for Glock 19 G4 and CZ75 P-01
Title: Re: What holsters fit the P-01?
Post by: CPTKILLER on May 27, 2016, 12:59:26 PM
I mentioned in the Holster Section that I now have an excellent El Paso Saddlery 1942 "Tanker" Holster.  For secure Open Carry, it is hard to beat. It was made to fit my CZ PO1 and the fit, form, and function is perfect.

http://www.epsaddlery.com/pc-154-14-1942-tanker-holster-3-to-5-barrels.aspx
Title: Re: What holsters fit the P-01?
Post by: Thebillsman on May 29, 2016, 11:08:44 PM
Do you guys think the new Omega will be a tough fit for normal P-01 holsters because of the ambi safety?
Title: Re: What holsters fit the P-01?
Post by: montigre on June 05, 2016, 08:09:05 AM
I am curious to find out which OWB holsters should fit the new Omega P-01 convertibles with the raised suppressor sights.  I just purchased the gun yesterday and have found many holsters online for the standard P-01, but none specifically that will accommodate the suppressor sights.

Any insight would be greatly appreciated.
Title: Re: What holsters fit the P-01?
Post by: inspectagadget on June 19, 2016, 07:50:09 PM
I really like the Vedder Holsters. They are EXTREMELY comfortable.
Title: Re: What holsters fit the P-01?
Post by: Thebillsman on June 19, 2016, 07:56:16 PM
I am curious to find out which OWB holsters should fit the new Omega P-01 convertibles with the raised suppressor sights.  I just purchased the gun yesterday and have found many holsters online for the standard P-01, but none specifically that will accommodate the suppressor sights.

Any insight would be greatly appreciated.

I run an AG Cloak Tuck 3. I just got my P-01 Omega a few days ago and it fits great with the sights and ambi decocker. Being a fairly heavy carry gun the cloak tuck distributes the weight well due it's size.
Title: Re: What holsters fit the P-01?
Post by: Rutherford2 on July 09, 2016, 09:28:41 AM
I recently acquired a holster for the CZ P-01 with TLR-1 mounted. It is a Geaux Hard Holsters Genesis model, which is a WML appendix holster with concealment wing that ships with a Raven clip, standard over clip and soft loops with pull-the-dot fasteners.

Great fit, excellent retention and concealability. These are now my go-to EDC IWB holsters.

They were great to work with and turnaround on the custom order was about 2 weeks. They also have P07 and P09 options available.
Title: Re: What holsters fit the P-01?
Post by: TheCZLife on July 15, 2016, 07:12:39 PM
i just recently bought a TLR-1 for my cz p01.

is there a holster to carry a p01 with the tlr-1 attached? preferably for open carry. thanks  ;D

anyone?

I recently purchased a blue gun and had Fury carry solutions make me a holster, they should be making them now for the p-01 since I bought them the blue mold gun for them. I had them make me two holsters, one with a light (the tlr-1) and one without, they are kydex. so far I like them. hope that helps.
Title: Re: What holsters fit the P-01?
Post by: Geared4me on July 31, 2016, 08:26:19 PM
Winthrop Holsters makes a really nice owb fitted leather holster for the Glock 19 that fits my P-01 perfectly. Their craftsmanship is very good and their prices are fantastic for the quality of the product.
http://www.winthropholsters.com/glock-19-outside-the-waistband-w-shield-holster-right-handed-black-0013/
Title: Re: What holsters fit the P-01?
Post by: CPTKILLER on January 24, 2017, 10:11:22 PM
https://scontent-dft4-2.xx.fbcdn.net/v/t31.0-8/15936759_10108892864031070_8231373675735912466_o.jpg?oh=a4f3ea60ec33553444225e0d9c85c80c&oe=5914522B

Forget the old guy me, that is my PO1 in a El Paso Saddlery military style shoulder holster.  This is at the Texas State Capitol.
Title: Re: What holsters fit the P-01?
Post by: BrenToo on August 20, 2017, 02:20:05 PM
MTR Custom Leather

https://www.mtrcustomleather.com/product/a-1c-cross-draw-holster/

https://www.mtrcustomleather.com/product/c-1-the-swan-holster/

Title: Re: What holsters fit the P-01?
Post by: CB36457 on August 25, 2017, 06:28:50 PM
Very happy with the Dual Carry holster by DM Bullard. Just ordered one for my p01 but I've been carrying a Kimber Eclipse in a Dual Carry for years. There is a 4-6 week waiting period but the quality and craftsmanship make it worth it.

http://store.dmbullardleather.com/catalog/product/921663d136944e729076668523956df9
Title: Re: What holsters fit the P-01?
Post by: LeMarque on October 01, 2017, 03:26:45 PM
Sorry for the cross post but I'm feeling desdparate ...

At first I thought I was sold on the AG Cloak Side but since this is my first holster I wanted the option to adjust the cant (sp) just to get used to the differences. I also wanted something that fit close to my body not necessarily for CC at this time; just so I don't feel like I wearing a canteen. I'm not so much into  the Star Wars look either.

So, after way to much time on the Net I have to make a decision - It's either choosing to the AG Cloak Mod (very Star Wars) or the Comp-Tac International Outside The Waistband.

All therapy greatly appreciated.
Title: Never Mind :-) Re: What holsters fit the P-01?
Post by: LeMarque on October 02, 2017, 11:10:34 AM
Went ahead and purchase the Blade-Tech IDPA Competition Shooters Pack.

I'll review once all the gear arrives
Title: Re: What holsters fit the P-01?
Post by: christak on October 15, 2017, 06:54:10 PM
Winthrop and Mid Atlantic make good quality, affordable holsters for the P-01. I have both of these and have been well pleased with them.

http://www.winthropholsters.com/cz-75-p-01-3-75-inch-barrel-outside-the-waistband-w-shield-right-handed-black-1106/ (http://www.winthropholsters.com/cz-75-p-01-3-75-inch-barrel-outside-the-waistband-w-shield-right-handed-black-1106/)

https://www.mid-atlantic-holsters.com (https://www.mid-atlantic-holsters.com)
Title: Re: What holsters fit the P-01?
Post by: Mutt208 on November 04, 2017, 12:33:07 PM
Make your own

(https://i.imgur.com/Q2aLtbIl.jpg)
Title: Re: What holsters fit the P-01?
Post by: PMG on November 24, 2017, 03:45:28 PM
Tom at 2Aholster.com makes a nice adjustable holster; adjust height and cant. Nice fit and finish. I like it so far and Tom is a nice guy.

(https://uploads.tapatalk-cdn.com/20171124/ffd030939e0436b8593969d83e58eec9.jpg)(https://uploads.tapatalk-cdn.com/20171124/6d5fcb7625862137fc906c7ead0c268a.jpg)(https://uploads.tapatalk-cdn.com/20171124/67b5b992033145b6f1963ec7a03dba5f.jpg)

Sent from my SM-N900T using Tapatalk

Title: Re: What holsters fit the P-01?
Post by: Laufer on December 14, 2017, 08:24:34 PM
My only holster is the Remora IWB, for the .380 Makarov (Russian).

Many ads or photos don't describe whether a holster is IWB or OWB.

Unless it can be identified in a photo, how are we to know, and why don't people state which type it is?

Title: Re: What holsters fit the P-01?
Post by: treefrog on March 05, 2018, 08:20:38 PM
Vedder Light Draw, OWB.  It's a kydex holster.  Fits the 91299 great.
Title: Re: What holsters fit the P-01?
Post by: JLla84 on June 04, 2018, 04:30:42 PM
Any suggestions out there for a P-01 w/ APLc?

OWB & IWB
Title: Re: What holsters fit the P-01?
Post by: samson on July 06, 2018, 04:17:04 PM
Any suggestions out there for a P-01 w/ APLc?

OWB & IWB
+1
Title: Re: What holsters fit the P-01?
Post by: ZedHeadHunter on September 02, 2018, 06:34:57 PM
Any suggestions out there for a P-01 w/ APLc?

OWB & IWB
+1

+2

I just picked up a P-01 and plan to put an Inforce APLc on it. I know https://blackrhinoconcealment.com (https://blackrhinoconcealment.com) has an option. I'm just making sure that is my best option before buying.
Title: Re: What holsters fit the P-01?
Post by: Batt 57 on March 16, 2019, 04:07:19 PM
Do any of you have any experience with Clinger Holsters?

https://clingerholsters.com/product/v3-no-print-wonder-holster/
Title: Re: What holsters fit the P-01?
Post by: Christophorus on March 24, 2019, 01:02:37 AM
Any suggestions out there for a P-01 w/ APLc?

OWB & IWB
+1

+2

I just picked up a P-01 and plan to put an Inforce APLc on it. I know https://blackrhinoconcealment.com (https://blackrhinoconcealment.com) has an option. I'm just making sure that is my best option before buying.


I also just got a P-01 with the APLc. Did you ever find a factory holster that worked?


Thanks
Title: What holsters fit the P-01?
Post by: Due51 on April 10, 2019, 03:22:58 PM
I just received this aiwb holster from Brace DeClerk off ebay for my new P01 Omega.  This is a well made, tight fitting, good looking holster that cost $32.50 delivered.
The pistol snaps in tight with no noticeable play, has a nice wide clip that's easy to pull out to fit over your belt, and comes with an extra claw/screws.

It's a heck of a value, in my opinion.

Here's his ebay sight:
https://www.m.ebay.com/sch/i.html?sid=bradecholsters&isRefine=true&_pgn=1

I would recommend.
(https://uploads.tapatalk-cdn.com/20190410/7d520be4a43e93b28edd76a24fa48fb7.jpg)(https://uploads.tapatalk-cdn.com/20190410/25205651ae4bc0ec1390c8ed91a0b4da.jpg)(https://uploads.tapatalk-cdn.com/20190410/00ac9c4fd26a5b7a2905d21b94debfa5.jpg)(https://uploads.tapatalk-cdn.com/20190410/8ba93b40640f2c1494553fc65f68d8d1.jpg)(https://uploads.tapatalk-cdn.com/20190410/191d3e62b1f0d10825dabf3e2d813a6d.jpg)
Title: Re: What holsters fit the P-01?
Post by: black43 on May 02, 2019, 05:51:41 PM
I just received this aiwb holster from Brace DeClerk off ebay for my new P01 Omega.  This is a well made, tight fitting, good looking holster that cost $32.50 delivered.
The pistol snaps in tight with no noticeable play, has a nice wide clip that's easy to pull out to fit over your belt, and comes with an extra claw/screws.

It's a heck of a value, in my opinion.

Here's his ebay sight:
https://www.m.ebay.com/sch/i.html?sid=bradecholsters&isRefine=true&_pgn=1

I would recommend.


I second this, great holster for the money and easy to deal with. He was very helpful on the phone.
Title: Re: What holsters fit the P-01?
Post by: MilSpec on May 17, 2019, 08:57:00 PM
I have a Clinger V3 Stingray IWB on order for my P-01.  Looking forward to trying out Clinger.

Today I also tried a Blackhawk leather thumb-break for a Springfield XD 4” that I had on-hand, and I was happy to find that the P-01 fit perfectly!  I’m not a big fan of thumb-breaks, but they do have their usefulness at times, and it’s nice to have the option.

The holster came with a used SR9C I bought; which also fits it perfectly, so it makes me wonder if other holsters for the 4” XD and SR9C would fit as well...