The Original CZ Forum

CZ PISTOL CLUBS => Curio and Relic CZs => CZ100 SERIES CLUB => Topic started by: Cyanide on October 27, 2014, 07:26:47 PM

Title: CZ 100
Post by: Cyanide on October 27, 2014, 07:26:47 PM
(http://tapatalk.imageshack.com/v2/14/10/27/0a55481676453370d6c8819568c1dc39.jpg)

I know, I know, we have a sub forum for this pistol that is tucked away, forgotten in the Curio and Relic CZ Section, which is practically dead concerning the CZ it seems most everyone wants to forget about. There has got to be somebody active on this board who still has one of these besides member "ac".

Those who've read my posts know I'm an oddball, as I prefer shooting my CZ's in DA and I like true, self-cocking, revolver-style DAO models of certain pistols; namely ones I owned in the past such as the Beretta 96D and Ruger P95DAO, and now I have a Beretta Cougar 8000D on the way. Possibly later on a PX4 D and Sig P250 may eventually join the collection, which is presently undergoing a major overhaul.

The old CZ 100 looks like a dream come true for me since I doubt I'll ever see a DAO P-01 and/or P-07. Roughly identical in size to the two aforementioned models and a slim profile for CC'ing, with exception of the sharp edges.

(http://tapatalk.imageshack.com/v2/14/10/27/63ccc0da738289c1492967631c8d3ee2.jpg)

(http://tapatalk.imageshack.com/v2/14/10/27/edbd154d96ae29a5f17cff69cba420fd.jpg)

Those who speak from experience actually handling, shooting, and owning the 100, please tell the blunt, honest truth. Is the trigger truly as bad as the reports and reviews make/made it out to be? It seems that for every one or two shooters that like them, there are 10 to 15 that just rip the pistol apart, and all because of the trigger.

I'm just having a very difficult time trying to wrap my head around how bad it can be, especially if it is a 10-pound pull as the specs list from the September '98 issue of American Rifleman I was able to track down.

Yes, even they mention that it is a long pull. But when I'm looking at a side angle shot, the trigger looks like it is in the same forward position as any other DA/DAO pistol. More specifically, concerning length from start position to where the trigger would meet it's farthest rearmost position all the way back.
Title: Re: CZ 100
Post by: Firemanjones on October 28, 2014, 12:32:42 PM
Those who've read my posts know I'm an oddball,
My oddball friend, I would love to see you get one and then come down to South Florida on one of your possible trips so I could shoot it.
Title: Re: CZ 100
Post by: Cyanide on October 28, 2014, 02:20:50 PM
Sorry, double post.
Title: Re: CZ 100
Post by: Cyanide on October 28, 2014, 02:44:18 PM
I wonder how accurate this photo combination set is? Anyone have both that can confirm if this is realistic?

(http://tapatalk.imageshack.com/v2/14/10/28/ba39b3d71e747789eec9ee489a16f43e.jpg)
Title: Re: CZ 100
Post by: tekarra on October 28, 2014, 03:52:43 PM
I would dearly love to shoot the 100.
Title: Re: CZ 100
Post by: Cyanide on October 29, 2014, 06:21:00 PM
You and I both!
Title: Re: CZ 100
Post by: mbott on October 29, 2014, 06:35:23 PM
I can put one next to a P01 if you wish.

I have a .40 and I like it.  It's accurate and fits my hand well.  Shame it never really took off.  I really like the re-strike capability that it has over the Glocks/M&Ps.

--
Mike
Title: Re: CZ 100
Post by: Cyanide on October 29, 2014, 06:40:39 PM


I can put one next to a P01 if you wish.

I have a .40 and I like it.  It's accurate and fits my hand well.  Shame it never really took off.  I really like the re-strike capability that it has over the Glocks/M&Ps.

--
Mike

Mike, please do! I've got both the P-01 and P-07 myself. If possible, will you please do several shots similar to this?
(http://tapatalk.imageshack.com/v2/14/10/29/e5de77611cc944c35e0ee1aa7d38496e.jpg)
(http://tapatalk.imageshack.com/v2/14/10/29/09fe6775fb7e46eb61b32033e0cd33c8.jpg)

I owe ya!!!

Title: Re: CZ 100
Post by: mbott on October 29, 2014, 07:58:51 PM
(http://imagizer.imageshack.us/v2/640x480q90/674/9Yrkmp.jpg)

(http://imagizer.imageshack.us/v2/640x480q90/674/mDXdoa.jpg)

(http://imagizer.imageshack.us/v2/640x480q90/905/e7Yr2W.jpg)

(http://imagizer.imageshack.us/v2/640x480q90/538/01is4A.jpg)

(http://imagizer.imageshack.us/v2/640x480q90/538/HKxemm.jpg)

(http://imagizer.imageshack.us/v2/640x480q90/540/Jd6OOg.jpg)

(http://imagizer.imageshack.us/v2/640x480q90/901/P5FkD5.jpg)

Sorry, the good camera wasn't available.

--
Mike
Title: Re: CZ 100
Post by: Cyanide on October 30, 2014, 01:33:37 AM
Mike,  no worries. Those pics came out great...THANK YOU!

When I first saw at the images, I was thinking it looked very bulky. Then I combined a couple of your images with mine, and it looks like it may actually be just slightly slimmer than the P-07, especially the slide area due to it's sharp taper.

If it feels better in hand than either the P-01 or P-07 (which may be an almost impossible task), I think I may have to say, "bleep the torpedoes, full speed ahead!", and take a chance with it.

C'mon CZ, shorten the pull, lower the pull weight a tad, melt all the sharp edges ala P-07/P-09, throw Meprolights on it, and take a second stab at it! I'd be willing to bet if they did that, but especially fixing the trigger pull there would be an ample amount of sales.

But we'll probably never know....
Title: Re: CZ 100
Post by: MOnmoguns on November 02, 2014, 05:09:48 PM
I've never seen one of those . When did they make the 100 ? Does that say PCR on the slide ? Interesting indeed .  ???
Title: Re: CZ 100
Post by: Cyanide on November 02, 2014, 05:57:34 PM
It went into production in '95. Then there was the CZ 110 which took away the DAO and made it a traditional DA/SA with a decocker. Think of that one as a CZ style Walther P99 AS, minus the "Anti-Stress" mode. Too bad it was never imported in large quantities (if ever)...

Resident Oddball
Title: Re: CZ 100
Post by: Cyanide on November 02, 2014, 08:55:25 PM

Well, I done went off and did it now. Won a CZ 100 off of GB a little while ago. Now comes the wait to get back home and get it to the range, which won't be until the end of the week at the earliest, next week more realistically...


Better quality pics after I take delivery of it!

(http://tapatalk.imageshack.com/v2/14/11/02/5d86f2c81b841a401bf53da91f3e5f09.jpg)
(http://tapatalk.imageshack.com/v2/14/11/02/21393d270beac777519fd6302f51cb8d.jpg)
Title: Re: CZ 100
Post by: 1SOW on November 02, 2014, 09:28:20 PM
Cool looking pistol.
Sorry to be 'dumb',  but what is the device on the slide top between the sights and just behind the ejection port?
Title: Re: CZ 100
Post by: mbott on November 02, 2014, 09:39:07 PM
From the September, 1998 Dope Bag in the American Rifleman: "The CZ 100 has a unique steel locking stop on the slide behind the breech. It serves to limit the locking block?s upward travel as the tilting barrel moves into its locked position."

See http://www.nramuseum.org/media/364175/Sep%2098.pdf

--
Mike
Title: Re: CZ 100
Post by: Firemanjones on November 02, 2014, 09:56:50 PM
Way to go Cyanide!
Title: Re: CZ 100
Post by: Cyanide on November 02, 2014, 10:22:22 PM
Thanks, let's hold off on big celebrations lol. I could get it and pull the trigger that first time and immediately hate it and agree with all of the negative reviews.....but hopefully not!

Just have to make sure that I devote equal time to it, the new Beretta, the P-01, P-07, Steyr, and Grand Power. That case of ammo I just picked up from Freedom Munitions is going to come in handy!
Title: Re: CZ 100
Post by: Cyanide on November 03, 2014, 01:23:16 PM
We oughtta have a get-together for all us in the Florida-based CZ Gang sometime! Heck, everyone can come!!!
Title: Re: CZ 100
Post by: 1SOW on November 03, 2014, 01:36:55 PM
Thanks Mike.
Title: Re: CZ 100
Post by: Firemanjones on November 03, 2014, 03:42:04 PM
Right on!
Title: Re: CZ 100
Post by: MetalGravy on November 10, 2014, 12:36:59 AM
Sooo, update?
Title: Re: CZ 100
Post by: Tok36 on November 10, 2014, 01:25:05 AM
Interesting pistol. I cant say i am in love with how it looks, but i am interested to hear more about it. Maybe it will grow on me, you never know.
Title: Re: CZ 100
Post by: Cyanide on November 10, 2014, 09:39:40 AM
Sooo, update?
Haven't gotten it yet bros (or my Beretta), still on the road with work. It will be sometime later this week though, can't wait!
Title: Re: CZ 100
Post by: Makaroviii on November 11, 2014, 11:13:58 PM
It was many years ago I had the chance to handle the CZ 100. From what I remember, the grip felt slick and needed more texture and you already know what is said about the trigger...
Title: Re: CZ 100
Post by: armoredman on November 11, 2014, 11:31:34 PM
I have owned and shot a CZ-100. I did not like it. The trigger pull was bad, very bad. It was a one-of design made for a foriegn buyer to their specs, from common folklore, and when that fell through they sold it as the CZ-100 and outside of the US as the CZ 110, which was DA/SA, IIRC.

Cyanide, CZ is highly unlikely to ever revist that design, sorry. The CZ P-07 is a better pistol by far, IMHO.

That oddball protrusion halfway down the top of the slide is a one hand cocking device, meant to hook to a "thing" on your belt to rack the slide one handed. Why...no idea.

It looked great, felt great, and shot terribly because of that horrible DAo pull.
Title: Re: CZ 100
Post by: Cyanide on November 12, 2014, 09:54:32 AM
Cyanide, CZ is highly unlikely to ever revist that design, sorry. The CZ P-07 is a better pistol by far, IMHO.

I know, I know. But would be nice if CZ made a limited run of DAO P-07's (and 09's too) for us oddballs, 'cause I'd be all over it! I already love the Omega trigger as is and can only imagine having one in DAO with maybe a couple of pounds or so trimmed off of the stock pull.

Picture if you would, DAO P-07 (or even P-01) with a 6# or 7# trigger pull, trigger work by either CGW or CZC work to reduce takeup slack and pull length, bobbed hammer, and stock Meprolights. I think it could work, and in this day and age where most everybody wants that "one, consistent trigger pull", that desire could be met. CZ, are you listening, even if I'm the only one?

Just my little fantasy world, but I think if that creature ever created, people would take note and there would be quite a few more CZ's in the hands of shooters, and fewer Glocks, PPQ's, M&P's, etc. Would just take good word-of-mouth results, aggressive marketing, and aftermarket support. Not saying it would take over the world mind you, but for me personally, it would be a whole lot closer to, "Perfection".

Moving on....

Only a few more hours now before I can pick up the new additions, but most likely I won't be able to get to the range until probably Friday or Saturday to actually shoot.

I have been thinking (I know, very dangerous, handle w/care hahaha), if my opinion on the CZ 100 turns out to agree with the majority of people who hate the trigger, I will keep it but relegate it to my DA trainer.  Seriously, I figure if the trigger pull is truly that bad, then it can do nothing but help improve what I already do with my P-01 & P-07.

Uh oh, almost forgot about that butter smooth DAO Cougar trigger. bleep!
Title: Re: CZ 100
Post by: Firemanjones on November 12, 2014, 10:38:03 AM
Well I am sure you will improve it a bit by doing some polishing.
Title: Re: CZ 100
Post by: Firemanjones on November 12, 2014, 10:43:17 AM
Check these links out, maybe you can improve on yous if it needs it.
http://www.czfirearms.us/index.php?topic=4281.0
http://www.czfirearms.us/index.php?topic=4152.0
Title: Re: CZ 100
Post by: Cyanide on November 12, 2014, 09:27:22 PM
WOW! Okay either I'm an oddball or I have one of the best triggers on any CZ 100 ever made! I arrived at my LGS a few minutes too late to actually take delivery today, as they already had the computers and everything shut down but, they at least let me handle it and to be quite honest, I'm very impressed.

Yes, y'all heard correctly, I am impressed and absolutely cannot wait to get to the range ASAP and to start putting rounds through this thing. I really don't see why all the negativity over the trigger. I dry fired mine about 30 times in the store and yes, the trigger pull is long and though I see exactly why the complaint of overtravel, it is very smooth and doesn't seem to be any longer of a pull than any other true double action handgun. Dare I say it is both smoother and lighter feeling than my Beretta 8000 D that I had right beside it.

The other thing I noticed was how small this pistol feels in my hand. Even though it is comparatively identical in size to the P-01 & P-07, it sure seems smaller and lighter. If this thing shoots as well as it feels, I will most likely get the grip stippled on the sides to compliment the front and back gripping lugs/checkering, because I can honestly see a strong possibility of me using this as EDC! Further reports to follow....


Title: Re: CZ 100
Post by: Firemanjones on November 12, 2014, 09:46:41 PM
It is possible that a previous owner did some work on the trigger.
Title: Re: CZ 100
Post by: Cyanide on November 13, 2014, 12:42:33 AM
Maybe, but I'd like to think not!
Title: Re: CZ 100
Post by: Psyop96 on November 13, 2014, 09:35:38 AM
Always with the negative waves, Moriarty! :D

Just think of it this way, it it hasn't been worked on, then there were some good triggers out there. If it had been worked on by the previous owner, then it shows the potential for making a good trigger with that model. Congratulations on finding this and hoping it handles and shoots well for you, Cyanide.
Title: Re: CZ 100
Post by: Cyanide on November 13, 2014, 02:27:20 PM
I am going to have to say I wonder if somehow, someway the previous owner did any did work on this trigger group? Average of three pulls on a Lyman digital scale was 8.6#! Pics coming asap...
Title: Re: CZ 100
Post by: Independent George on November 13, 2014, 02:33:24 PM
Maybe you're just having a psychotic break?
Title: Re: CZ 100
Post by: Firemanjones on November 13, 2014, 03:51:33 PM
 [/quote]
It is possible that a previous owner did some work on the trigger.
Maybe, but I'd like to think not!-
I am going to have to say I wonder if somehow, someway the previous owner did any did work on this trigger group? Average of three pulls on a Lyman digital scale was 8.6#! Pics coming asap...

I hate to be an "I told you so." ;)
Title: Re: CZ 100
Post by: Cyanide on November 13, 2014, 04:51:11 PM


I hate to be an "I told you so." ;)



(http://tapatalk.imageshack.com/v2/14/11/13/3bfac49a0e175edbd7a56c7e0a864bbd.jpg)
(http://tapatalk.imageshack.com/v2/14/11/13/11b260e0650d3a76a0b549f907027323.jpg)

Not the greatest grouping, but I like this thing! I didn't have lots of time for the range today, but here's my first 30 shots; 10 each @ 7, 10, and 15 yards:
(http://tapatalk.imageshack.com/v2/14/11/13/5c9304713b637a37d6c0f19c74fc18c7.jpg)

Then the next 25:
(http://tapatalk.imageshack.com/v2/14/11/13/f2e915025e3790f14a31ae696d24922f.jpg)

Comparison pics coming soon....
Title: Re: CZ 100
Post by: Fredward on November 13, 2014, 05:36:32 PM
Yes, the trigger is horrible. I had two in .40 (along with 2 75B's, long story). Pulling the trigger reminds me of winding a cheap alarm clock BUT BUT BUT they were both very accurate. I carried one for a couple of years, had the other for HD. Eventually they were recycled to family members who preferred utility to aesthetics, as I moved over to prettier guns. The trigger pull was so bad, though, I couldn't fire more than a box thru either one without having to stop. You know the "horn" on top of the slide was designed for one handed chambering, perhaps on a duty belt.
Title: Re: CZ 100
Post by: Firemanjones on November 13, 2014, 06:17:56 PM
Looking good Cyanide.
Title: Re: CZ 100
Post by: Cyanide on November 13, 2014, 06:24:13 PM
Thanks FJ!

Fredward, looks like I am definitely odd man out, as I actually like the trigger pull and after the limited amount of shooting I did today, it went on my side. Either the previous owner must have smoothed out the trigger action or I'm just very in tune with DAO triggers, because from what everybody else is saying about how bad the 100's are, this thing is exactly what I have been wanting. Not saying I would try using it for competitive shooting mind you, but for defense I am digging it.
Title: Re: CZ 100
Post by: Tok36 on November 13, 2014, 07:02:05 PM
Looking good Cyanide.

^^Indeed. a Cool and unique CZ. Glad it finely made it home. Thank you for the followup Cyanide. Interesting stuff.
Title: Re: CZ 100
Post by: Cyanide on November 14, 2014, 05:24:40 PM
Thanks Tok36! Here's my next quick group from earlier this afternoon, 10 shots each at 7, 10, 15, and 20 yards. Getting it tightened up a little bit! The digit on the end signifies what string of fire (1 = first, 2 = second, etc.).
(http://tapatalk.imageshack.com/v2/14/11/14/070e3a33ca00525db4fab16ea7cebe69.jpg)
Title: Re: CZ 100
Post by: Cyanide on November 16, 2014, 07:44:16 PM
Another quick trip to the range today. Not getting to shoot much, keeping busy here on my time off at home. Long story short, I'm really, really liking this pistol...A LOT!

(http://tapatalk.imageshack.com/v2/14/11/16/e13d63fcc05a69ec7a8564c823fefb50.jpg)

Here's a few pics showing it in my hand:

(http://tapatalk.imageshack.com/v2/14/11/16/3befa01239ff0e81231da15acca4dd08.jpg)

(http://tapatalk.imageshack.com/v2/14/11/16/01da1461db19fdf45f83c8d3a26b5215.jpg)

(http://tapatalk.imageshack.com/v2/14/11/16/26bfb3c71d054a58150c2f070c731620.jpg)

(http://tapatalk.imageshack.com/v2/14/11/16/68cba05573a29b61677af96fe982a22b.jpg)
Title: Re: CZ 100
Post by: Cyanide on November 23, 2014, 09:24:29 PM
Well, had to rush through another range visit today before coming back to work a little while ago, so I figured I would see how this thing would do performing LOTS of double-taps @ 7 & 10 yards. Meh, not the greatest, but I'm still pleased with the results, especially since only gonna get better over time.

Y'all have a great night!

(http://tapatalk.imageshack.com/v2/14/11/23/605cbe058b90ce67e52a2396dd01a95a.jpg)

(http://tapatalk.imageshack.com/v2/14/11/23/ee95642e369a60b92f8d3f4daf18e5f3.jpg)
Title: Re: CZ 100
Post by: Cyanide on November 28, 2014, 01:45:22 PM
Sorry if I'm bothering any of y'all, just sitting here bored in Casper, WY waiting to finish unloading so figured I'd put up a few more pictures.

Here's the same shots I have over in the pistol comparison thread of my CZ 100 vs the P-07.  They are practically identical in size, with a few minor differences here and there, but namely the slide width, the slide serrations, the grip serrations/checkering/stippling, and the edges That being said however, the CZ 100 is noticeably lighter and has a much easier slide to rack, no doubt due to the lighter recoil spring it has.

(http://tapatalk.imageshack.com/v2/15/02/11/f3b1e1717d085b3304a48621e64c8a02.jpg)

(http://tapatalk.imageshack.com/v2/14/12/06/1ee5a9a8b503e6661369f1bc1efdd3b3.jpg)

(http://tapatalk.imageshack.com/v2/14/11/27/9885184e9d172d76d2dc9efca4e1cb75.jpg)

I know the majority of people don't like the 100, but because of how smooth my trigger is, the light weight, the natural balance & point-of-aim, and how easy the slide is to rack, it has definitely caught positive attention from a very good friend of mine who is an almost life-long victim of Multiple Sclerosis with extremely limted hand and arm strength, and has had operating issues with every pistol I have ever shown and let fire. That is, until now. And add to it the ease of disassembly (almost as easy as Steyr, shown below) and the CZ 100 definitely has added another fan and future owner.

As always, start by ensuring the weapon is clear:
(http://tapatalk.imageshack.com/v2/14/11/28/42fdf687ad5be2a0afda432bb4dd6c73.jpg)

Just like the majority of other CZ's, move the slide back about a ?" and push the take down pin out from the frame.
(http://tapatalk.imageshack.com/v2/14/11/28/8b627d53d3b8aaa18517e9ff2e3e4c03.jpg)

Remove it, then dry fire the pistol to release the sear, and push the slide forward off the frame.
(http://tapatalk.imageshack.com/v2/14/11/28/fb124fdd1dce5f1df4681b893ba9d8d8.jpg)

Another little interesting thing about this pistol, is it's unique loaded chamber indicator. When empty it sits flush with the slide, when loaded it protrudes noticeably.
(http://tapatalk.imageshack.com/v2/14/11/28/b5bbbb01493050e0546317894ad4b7da.jpg)
Title: Re: CZ 100
Post by: couchcommando on November 28, 2014, 05:43:35 PM
You're certainly not bothering me. I've enjoyed all the comparison pictures that you have posted. They have been excellent. Keep them coming.
Title: Re: CZ 100
Post by: Firemanjones on November 28, 2014, 06:22:57 PM
Sorry if I'm bothering any of y'all, just sitting here bored in Casper, WY waiting to finish unloading so figured I'd put up a few more pictures.
No problem Cyanide, at least your posting gun porn while your bored.
Title: Re: CZ 100
Post by: Cyanide on November 28, 2014, 06:52:45 PM
Thank you. Now comes the drive back to Illinois for my next run going up to Vancover! Unfortunately I don't have any gun porn left the post I get back home take more pictures lol. I am going to take trigger measurements later tonight to compare against the measurements of my current and past CZ family.

Title: Re: CZ 100
Post by: armoredman on November 29, 2014, 09:48:06 PM
You never bother us, amigo! i'm glad you like, really, as I've always said the vast diversity of sidearms is there because we can't all like the same thing. I will state the absolute smoothest DAo trigger I ever felt was on a Colt Z-40, the Colt/CZ hybrid that morphed into what we call the RAMI 2075 nowadays. You're doing some darn good shooting with that sidearm, but I don't know if any holster maker still has the mold around for that model. High Noon MIGHT have one laying about somewhere, but I'm not sure.
Keep posting - we are always willing to read!
Title: Re: CZ 100
Post by: Cyanide on November 29, 2014, 11:26:54 PM
Thanks! It actually fits bleep near perfect in the Winthrop leather holster for my P-07, and hugs the hip nicely.

(http://tapatalk.imageshack.com/v2/14/11/29/a05c1f1c7d21ac43bb7ad99a7565b918.jpg)

Sorry I have not yet gotten the trigger measurements done, have been running my tail off ever since leaving out of the house back on Sunday night. Went from Jacksonville up to Muscle Shoals, AL to pick up Monday afternoon, that I then delivered yesterday morning in Casper, WY. And now sitting in the Joliet, IL area about to pass out before picking one up in the morning going out to Vancouver, BC. Busy, busy, busy!
Title: CZ 100
Post by: cntrydawwwg on November 29, 2014, 11:47:26 PM
That does look pretty good in the Winthrop Cyanide. FWIW, if you want a few cheaper holsters checkout the Frontlines on Amazon. They still have the CZ 100 in most styles and fairly cheap. The prices jump around every couple days, but I picked up a paddle kydex wrapped with leather for my Phantom for around 12 bucks. Now the same holster is $83.
   I was just on there and ordered a leather IWB for $11. Saw one for CZ 100 for $10.  Not sure how quality is on IWB, but I figured for that price I can experiment. http://www.amazon.com/gp/aw/d/B00EBBDCPY/ref=mp_s_a_1_17?qid=1417323042&sr=8-17&pi=AC_SY200_QL40
  Glad the CZ 100 is working out for you.
Title: Re: CZ 100
Post by: Cyanide on November 30, 2014, 12:01:59 PM
Thanks for the heads up cntrydawwwg, I'll have to check those out!
Title: Re: CZ 100
Post by: Cyanide on November 30, 2014, 02:56:01 PM
Finally got measurements done before dropping stuff off with babysitter, and wanted to share them with y'all. For comparison of "modern pistols" I've included the DA and SA measurements from the other two of my "Top 3", my P-01/P-07 (they're identical).

Note: all measurements taken at the forward most trigger position, at the point when all slack is taken out of the trigger and you actually start hitting resistance, trigger position when the pistol would actually fire. Here they are, and measured from the centerpoint rear of the trigger, to the rear most inside of trigger guard (subject to correction).

CZ 100:
Start: 20mm
Take up: 18mm
BANG: 5mm
Over travel: 5mm
Reset: 20mm
Total travel: 20mm (15-16mm if an over travel stop fabricated & used)
Trigger Pull: 8.6#

P-01 & P-07:
DA Start: 17mm
DA Take up: 15mm
DA ? Cock: 12mm
BANG: 2mm
Total travel: 15mm
Trigger Pull: P-01 10.2# / P-07 9.8#

SA Start: 10mm
SA Take up: 4mm
BANG: 2mm
Reset: 6mm
Total travel: 8mm
Trigger Pull: P-01 5.1# / P-07 4.3#

You be the judge! Just remember that the reset on the P-01 and P-07 is going to be so very much shorter because of the SA trigger.

(http://tapatalk.imageshack.com/v2/14/12/08/483af310dc19403e3407549ad3629a49.jpg)

Once I acquire another CZ 100 down the road I'll see how it stacks up versus the current one I have. We'll see how much variance there is in the trigger pull weight and smoothness.
Title: CZ 100
Post by: cntrydawwwg on November 30, 2014, 09:40:43 PM
Wow. 8.6lbs. That's really not that bad for double action. Thanks for the info.
Title: Re: CZ 100
Post by: Cyanide on December 01, 2014, 05:16:10 PM
Wow. 8.6lbs. That's really not that bad for double action. Thanks for the info.
Anytime! Glad I can help out and provide whatever info possible.
Title: Re: CZ 100
Post by: Firemanjones on December 02, 2014, 03:39:50 PM
Cyanide, check out CGW's Facebook page with the 75 DOA.
Title: Re: CZ 100
Post by: Cyanide on December 06, 2014, 12:03:41 AM
Cyanide, check out CGW's Facebook page with the 75 DOA.
Done!
Title: Re: CZ 100
Post by: Cyanide on December 06, 2014, 03:02:41 PM
Well, happened to be killing some time a few moments ago at the Cabela's south of SeaTac and wouldn't you know it, the Gun Library there has a CZ 100 there (2003 Mfg). After dry firing it several times, I can say with complete confidence that the trigger on mine (2006 Mfg) has not been worked on for smoothing out the action. This one felt identical in pull weight, firing break, and of course, the hated overtravel lol.

The one problem keeping me from going ahead and putting it on layaway or outright buying it was the $500 price tag!



They also had an HK P7 M13 that I messed around with. But that was entirely too rich for my blood at $2,500.
Title: Re: CZ 100
Post by: Sunset_Va on December 12, 2014, 08:07:59 PM
Hello, I have read this whole posting about the CZ100, it has just been interesting! Most of all thanks to Cyanide for doing all this and sharing it with us.

I saw the 100 once many years ago, but really didn't pay much attention to it. Now, years later, after reading all this, I kind of compare it to the Steyr pistols today. The Steyrs looked much like the original CZ 100, but the current model Steyrs just are much more user friendly.

Point I am getting at, is, that if CZ decided to re introduce the 100, and updated it, such as better grip texture, perhaps improve the trigger, add a rail and easy changeable front sight/night sights, It might be well received. But it would be competing against other polymer framed CZ products, which maybe they don't want to do. To me, if they downsized the CZ100 to perhaps a Walther. PPS size with the upgrades, I think it could become CZ's venture into the sub compact markets , excluding the Rami.
Title: Re: CZ 100
Post by: Cyanide on December 12, 2014, 09:29:24 PM
Sunset_VA, you are very welcome and thank you for the kind words!

I will be perfectly honest in saying that I'm not worried about trying to smooth out the trigger action as to me, it is very nice with the exception of the dreaded overtravel lol. I will be doing the pencil eraser quick fix for that (unless I actually put in an overtravel stop screw through the trigger),  and I will be getting the grip stippled asap.

If everything pans out, I should have a second 100 within the next couple of weeks and if so, David at CGW better get ready! Going to let him tinker with it and see what kind of Cajun magic he might be able to produce, even if very limited.

Title: Re: CZ 100
Post by: wouts75 on December 14, 2014, 12:39:14 PM
Hi, glad to see I'm not the only CZ100 follower still alive. I bought mine in 1996 and still carry it to this day. I did fit a trigger stop and smoothed out the trigger about 2 years ago. Trigger pull 8lb's, might be long but ultra smooth. Love it and very accurate.
Title: Re: CZ 100
Post by: Cyanide on December 14, 2014, 02:27:29 PM
I'm not alone! Bwahahahahaha
Title: Re: CZ 100
Post by: mbott on December 14, 2014, 10:54:30 PM
Not by a long shot.

--
Mike
Title: Re: CZ 100
Post by: ac on January 09, 2015, 01:46:59 PM
So what does the PCR printed on your slide stand for?
I have the cz100 in .40 and don't have that on my slide.
Title: Re: CZ 100
Post by: Cyanide on January 09, 2015, 01:59:28 PM
That isn't mine, that was a photo I had pulled off line before I purchased mine. Mine is the one in all of the more recent posts and pictures with the light brown towel as a background.

Title: Re: CZ 100
Post by: mbott on January 09, 2015, 02:01:20 PM
In this context, I'd say Policie ?esk? Republiky (Police of the Czech Republic).

--
Mike
Title: Re: CZ 100
Post by: ac on January 09, 2015, 02:48:49 PM
thanks
Title: Re: CZ 100
Post by: Cyanide on February 12, 2015, 12:46:08 AM
Just a quick posting of a few more target images from my recent range visits. Haven't been home much at all to be able to do any shooting, but hopefully that will change soon and I can get more trigger time has summer approaches.

(http://tapatalk.imageshack.com/v2/15/02/11/a2a22adb4c5257587711e99e74c17b14.jpg)

(http://tapatalk.imageshack.com/v2/15/02/11/59269ec1ea586ab8b3698997244508e6.jpg)

(http://tapatalk.imageshack.com/v2/15/02/11/c77a370ee0406acc2194eb7872714106.jpg)

(http://tapatalk.imageshack.com/v2/15/02/11/b1dfa18f011b9b11e01c24658ae0be09.jpg)

(http://tapatalk.imageshack.com/v2/15/02/11/4dcc3e7e41f08e5d56c5ff44da602afc.jpg)

I don't know, but maybe I need to adjust the sight just a lil' left. Whachyall think?
Title: Re: CZ 100
Post by: MetalGravy on March 14, 2015, 10:34:11 PM
Did you check if CZ 75 mags fit and function?
Title: Re: CZ 100
Post by: Cyanide on March 15, 2015, 11:47:49 AM
Did you check if CZ 75 mags fit and function?
No, as I don't have a regular CZ 75 or mags for one. P-01 mags fit, but wont lock in (I suspect due to the thicker rubber base plate), whereas the extended mags for the RAMI did lock in, but I was unable to function check them at the range before getting rid of them.

If anyone is needing replacement /extra CZ 100 mags in 9mm, I found a couple of places carrying them:

http://www.gunpartscorp.com/ad/1164450.htm (13 round mags only ones listed, $29.60 before shipping).

http://ammoclip.com/C/cz-100.htm (only one 13 round mag in-stock, $44 shipped. No other CZ 100 mags in stock).
Title: Re: CZ 100
Post by: MetalGravy on March 15, 2015, 01:48:23 PM
OK.  CZ has the 10 rounders for $39 a piece.
Title: Re: CZ 100
Post by: Cyanide on March 15, 2015, 04:01:51 PM
My current 100 came with one 10 round mag, & I picked the second up from F1restarter on here a few months back before ordering a couple of the 13 rounders from Ammoclip.

The second CZ 100 I am in the process of getting comes with 2-13 round mags, as well as the fixed rear sight with the European/Glock style white goal post outline.
Title: Re: CZ 100
Post by: Firemanjones on March 15, 2015, 04:09:20 PM
Wow, you are getting a second one! Good for you!
Title: Re: CZ 100
Post by: Cyanide on March 15, 2015, 04:12:36 PM
Thank you FJ, the DAO family grows! Hahahahahaha
Title: Re: CZ 100
Post by: Tok36 on March 15, 2015, 10:01:42 PM
If you duel wield 2 x CZ 100 dose it make a CZ 200? If only for a moment.....  ;D
Title: Re: CZ 100
Post by: MetalGravy on March 15, 2015, 10:48:18 PM
Only if you bolt them together like a Remington 1740
Title: Re: CZ 100
Post by: Tok36 on March 16, 2015, 01:53:19 AM
Only if you bolt them together like a Remington 1740

I see, like that crazy Russian double 1911.
Title: Re: CZ 100
Post by: Cyanide on March 16, 2015, 06:50:13 PM
If you duel wield 2 x CZ 100 dose it make a CZ 200? If only for a moment.....  ;D
Hahahahahaha... Smartazz!
Title: Re: CZ 100
Post by: MetalGravy on March 17, 2015, 07:51:24 PM
Are the .40 and 9mm mags interchangeable as with the CZ 75?
Title: Re: CZ 100
Post by: Cyanide on March 18, 2015, 06:14:54 PM
I don't know because I only own 9mm pistols. I think the few other CZ 100 owners on here probably have one caliber or the other, but not both.

Anybody have both that can answer MetalGravy's question?
Title: Re: CZ 100
Post by: Tok36 on March 18, 2015, 09:01:14 PM
CZ75 - 9mm vs. .40cal mags. I cannot speak from personal experience., but i gather from this video and a few other sources that the Mec-Gars will work with both calibers.

https://www.youtube.com/watch?v=fTvnnOKZ150
Title: Re: CZ 100
Post by: MetalGravy on March 19, 2015, 12:23:46 AM
I know that the mags are interchangeable for the 75.  Heck my 75 mags have both calibers stamped into them.  I've sent an e-mail to CZ to see what they think.
Title: Re: CZ 100
Post by: Tok36 on March 19, 2015, 02:15:16 AM
Ahh, i see said the blind man. My bad.
Title: Re: CZ 100
Post by: Cyanide on July 03, 2015, 09:17:12 AM
Finally added #2!

Yup, y'all heard correct. A NIB, earlier '03 model, S/N C7242.  Besides the fixed rear sight, other differences from #1 are the lack of the loaded chamber indicator pin, a smooth faced trigger, a solid trigger guard, the CZ logo on the slide is in front of CZ 100 vice behind it, there's also a large "CZ" on the pistol grip (in addition to the large CZ logo, and finally, it is marked "PW Arms, Redmond, WA vice CZ-USA, Kansas City, KS.

Hopefully I can get it out to the range with them the next couple of days or so, and see how it shoots compared to my other one. Y'all have a happy and safe Independence Day weekend!

Here's a few pics:

(http://images.tapatalk-cdn.com/15/07/03/b9557a82f26b95363bcd12d9edbb150e.jpg)

(http://images.tapatalk-cdn.com/15/07/03/60ea3baf6a33bb87aebb27a1570cfa94.jpg)

(http://images.tapatalk-cdn.com/15/07/03/b00101cd2e02d375cf0ca43e91b25add.jpg)

Compared to my Gen 4 Glock 19:

(http://images.tapatalk-cdn.com/15/07/03/473b70cb01fe17342fff6fd038c17c9f.jpg)

(http://images.tapatalk-cdn.com/15/07/11/16b53fea17c3034627bec83d62bf2868.jpg)

Pic with my other CZ 100 next to the Glock:
(http://images.tapatalk-cdn.com/15/07/11/c5f5a7b29cebc02b4826f696f4e9f0d0.jpg)
Title: Re: CZ 100
Post by: cntrydawwwg on July 03, 2015, 10:25:19 AM
Congrats Cyanide. And as always, great pictures.
Title: Re: CZ 100
Post by: Cyanide on July 03, 2015, 11:53:01 AM
Congrats Cyanide. And as always, great pictures.
Thanks! Will have a few more pics to add in my comparison thread asap
Title: Re: CZ 100
Post by: Cyanide on August 22, 2015, 05:14:15 PM
Aside from the BS elsewhere (having to sell my Sphinx almost immediately after getting it), my CZ 100 brings me back to my happy place...

Put a few quick rounds through my newest 100 that I posted about last month, the fixed sight PW Arms "import" model, as my first one is at a local gunsmith getting the grip stippled and a possible epoxy build up inside the trigger guard to fix the over-travel.

(http://images.tapatalk-cdn.com/15/08/22/dfb70368679f2d702481a35d7becef7c.jpg)

Needless to say, it's back on my side where it belongs!

Title: Re: CZ 100
Post by: jwc007 on August 22, 2015, 08:53:01 PM
Congratulations on the second Cz100 and good shooting!  8)  I may have to add a Cz100 to my useful collection one of these days, if I find a good one for sale.
Title: Re: CZ 100
Post by: Cyanide on August 22, 2015, 09:01:55 PM
Thanks jwc007! I saw a couple over the last month or so. There's one on GB being sold for an estate, and has been available for a number of months. Unfortunately, it's probably not gonna sell for $500
Title: Re: CZ 100
Post by: MP2 Guy on August 22, 2015, 10:03:18 PM
Congratulations on the second Cz100 and good shooting!  8)  I may have to add a Cz100 to my useful collection one of these days, if I find a good one for sale.
GM has a used 9mm CZ100 on their website for $400.00 (http://www.gandermountain.com/modperl/product/details.cgi?pdesc=CZ-USA-CZ-100-Handgun&i=UF104272524&uf=true)
Title: Re: CZ 100
Post by: jwc007 on August 23, 2015, 08:25:37 PM
Congratulations on the second Cz100 and good shooting!  8)  I may have to add a Cz100 to my useful collection one of these days, if I find a good one for sale.
GM has a used 9mm CZ100 on their website for $400.00 (http://www.gandermountain.com/modperl/product/details.cgi?pdesc=CZ-USA-CZ-100-Handgun&i=UF104272524&uf=true)

Thanx!  8)  I will have to lobby my "accountant" for that, as I already just bought yet another 9mm handgun.  (SAR B6P)
Title: Re: CZ 100
Post by: Cyanide on August 23, 2015, 08:41:10 PM
That one is lookin' real rough, and GM is asking entirely too much.

No idea what they want for the reserve, but looks much better: http://www.gunbroker.com/Auction/ViewItem.aspx?Item=502683237
Title: Re: CZ 100
Post by: Cyanide on August 25, 2015, 01:28:19 PM
On a quick (personal) side note, we all know everybody likes to mess with me as my CZ 100 is my primary carry (though right now I am wearing my Glock), so I figured I would add in another few pics as to why I love it so much.
I am glad to hear that you are not going over to the Dark Side, but you are carrying that Glock over your CZ100! :o ;)
Hey now, not trying to interest ya in it FJ! It just seems that almost everyone uses the Glock 19 as the benchmark for a compact pistol, and strangely enough a lot of people don't realize there are plenty of awesome compact pistols out there, and they aren't named Glock!
But it will always take a backseat to the P-07, as will just about everything else ('cept my CZ 100).
Man I am glad you cleared that up, I was starting to worry. 8)
Woe ye of little faith!

(http://images.tapatalk-cdn.com/15/08/25/44dae40117964f54ae5942d79e965687.jpg)

No worries, after a month of carrying the Glock, this and my newly acquired P-07 Duty are a welcome breath of fresh air since I don't have that bulky grip digging into my side when sitting, which makes up the majority of my day (and night) with work.

And when I said Dark Side, I was referring to we happy CZ owners, since everybody and their brother for the most part seem to ostracize you if you don't own and/or proclaim a Glock, M&P, VP9, or XD is the greatest thing ever. I do like my Gen 4 19, but......
Title: Re: CZ 100
Post by: Cyanide on September 02, 2015, 11:43:42 AM
My local gunsmith contacted me a little while ago with pictures of the stipple job on my first CZ 100. What do you guys think? I think it looks outfreakinstanding!

Before:

(http://images.tapatalk-cdn.com/15/09/02/ff77b1b1d465ae7dee077511757e9ef7.jpg)

After:

(http://images.tapatalk-cdn.com/15/09/02/c25089fd9fbf6162e6481ded2becc860.jpg)

(http://images.tapatalk-cdn.com/15/09/02/3cd5a5f22495a3bfb1098535236961ea.jpg)

(http://images.tapatalk-cdn.com/15/09/02/9531a713aeb28ea8d902eb57828c0576.jpg)

(http://images.tapatalk-cdn.com/15/09/02/7cb90afea5fc0970396bc7eaf4912d4b.jpg)

Next up will be my other CZ 100 and my PX4 D.
Title: Re: CZ 100
Post by: jwc007 on September 02, 2015, 01:11:59 PM
Your Gunsmith does Excellent Work!  8)  Very very Nice!  :)
Title: Re: CZ 100
Post by: cntrydawwwg on September 02, 2015, 02:52:12 PM
Looks great.
Title: Re: CZ 100
Post by: Cyanide on September 02, 2015, 03:52:27 PM
Thanks y'all!
Title: Re: CZ 100
Post by: Cyanide on September 22, 2015, 11:00:41 PM
Finally had an opportunity to get to the range, albeit a short visit, but ran a quick 50 rounds through the ol' girl. If y'all didn't get the memo, I love these pistols!

10 rounds each, slow fire (1 shot appx every 2 seconds) at 7, 10, 15, 20, and 25 yards. 25 yard line POA was the base of the neck where it meets the torso (flyer in right armpit was my own screw up):

(http://images.tapatalk-cdn.com/15/09/22/c7a3e3d72d2810646100dfe05c6b0ca3.jpg)

Need to find me a local range with some steel plates and poppers, would love to run this (and all my others) through some timed events.
Title: Re: CZ 100
Post by: Cyanide on September 27, 2015, 10:33:51 AM
That does look pretty good in the Winthrop Cyanide. FWIW, if you want a few cheaper holsters checkout the Frontlines on Amazon. They still have the CZ 100 in most styles and fairly cheap. The prices jump around every couple days, but I picked up a paddle kydex wrapped with leather for my Phantom for around 12 bucks. Now the same holster is $83.
   I was just on there and ordered a leather IWB for $11. Saw one for CZ 100 for $10.  Not sure how quality is on IWB, but I figured for that price I can experiment. http://www.amazon.com/gp/aw/d/B00EBBDCPY/ref=mp_s_a_1_17?qid=1417323042&sr=8-17&pi=AC_SY200_QL40
  Glad the CZ 100 is working out for you.
Cntrydawwwg, I finally decided to take a chance and ordered one of the Front Line holsters. Not bad at all, got this one for $34 shipped. Thanks again for the heads up!

Was a bit skeptical at first with the minimalist nature of the holster design, but after wearing it a few days now I'm really digging on it. Very surprised at how comfortable it is, considering the low sweat guard, which has made a big difference not having that tall piece of kydex digging into my side, especially when sitting. It also has very good retention, though it took me a little experimenting with how tight I wanted the screws, as it came shipped backed out almost all the way.

And I thought I'd never wear a full kydex holster! Lol

(http://images.tapatalk-cdn.com/15/09/27/1ccf8fa9a3b119dcac0e8d0c4a3b3002.jpg)

(http://images.tapatalk-cdn.com/15/09/27/4ae0f3dd9d89f3fec4bbbaebe0368982.jpg)
Title: CZ 100
Post by: cntrydawwwg on September 27, 2015, 01:20:38 PM
You're welcome, glad it's working out for ya, Cyanide. It's weird how the prices fluctuate with those holsters. One day they are really cheap then the next they're really expensive.
Title: Re: CZ 100
Post by: Cyanide on October 28, 2015, 06:26:24 PM
My local gunsmith just messaged me with pics of the now finished stipple job on CZ 100 #2. I like this one better than the job on #1; they sanded down the horizontal ridges on the grip, and stippled the entire upper rear grip & frame. More pics I pick it up in a week or so.



(http://images.tapatalk-cdn.com/15/10/28/705a77d251cba9f488b0b993854138be.jpg)

(http://images.tapatalk-cdn.com/15/10/28/ccbb4675e21ab66c554cdbbe8614f1e0.jpg)

(http://images.tapatalk-cdn.com/15/10/28/6104964d3ae9b945add2ea32f7360d4c.jpg)

(http://images.tapatalk-cdn.com/15/10/28/db5b3c8278f38031c5cad81355735b60.jpg)
Title: Re: CZ 100
Post by: Cyanide on November 10, 2015, 01:37:44 PM
Just picked up CZ 100 #2 (my fixed sight model) from the 'Smith late yesterday, and wanted to share pictures in a little more detail of this most recent stipple job.

To me, it is outstanding and provides a complete 180? change in grip traction from a stock CZ 100. They did this one a little more aggressively and with slightly more coverage areas than my first one, and also sanded the horizontal grooves across the frontstrap and backstrap of the grip down prior to stippling. Here ya go:

(http://images.tapatalk-cdn.com/15/11/11/90e8661e543d91dd2c91a888777fabdd.jpg)

(http://images.tapatalk-cdn.com/15/11/11/3dad60c1f35ae839e051202107082361.jpg)

(http://images.tapatalk-cdn.com/15/11/11/fff07a128e78e4e641d7fc47d213de00.jpg)

(http://images.tapatalk-cdn.com/15/11/11/166427a1b1dbd6573b570f733f8ce4c8.jpg)
Title: Re: CZ 100
Post by: jwc007 on November 10, 2015, 07:29:15 PM
Very Good Work!  8)
Title: Re: CZ 100
Post by: Cyanide on November 11, 2015, 08:31:29 PM
Thank you!
Title: CZ 100
Post by: Cyanide on December 15, 2015, 08:35:09 PM
To me, if they downsized the CZ100 to perhaps a Walther PPS size with the upgrades, I think it could become CZ's venture into the sub compact markets, excluding the Rami.
I've no complaints about the size of the 100, especially since it's a very small double stack, and very concealable. Here's some pics along with measurements (comparable to P-07, Glock 19 or 3rd Gen S&W 6946):

(http://images.tapatalk-cdn.com/15/12/15/01007b7023e0bed1e349145d1a39fcbe.jpg)

(http://images.tapatalk-cdn.com/15/12/15/f8f1808cd8b58401b7a9c231eda18bef.jpg)

(http://images.tapatalk-cdn.com/15/12/15/e8d4de2ff9b46a115019b5ed5142506c.jpg)

(http://images.tapatalk-cdn.com/15/12/15/0a9ee8c722d8bb9107b53d23067eef58.jpg)

(http://images.tapatalk-cdn.com/15/12/26/5ced71367669967fda716d2f7fc4fd7d.jpg)

(http://images.tapatalk-cdn.com/15/12/26/09625cea194f3bd3a5b23c85bf9aff2b.jpg)
Title: Re: CZ 100
Post by: Tok36 on December 16, 2015, 09:32:32 PM
The frame stippling really improves the look of the CZ 100.
Title: Re: CZ 100
Post by: Cyanide on December 18, 2015, 05:26:34 PM
The frame stippling really improves the look of the CZ 100.
Ya should feel the difference, night and day!
Title: CZ 100
Post by: Cyanide on November 12, 2016, 01:29:37 AM
And another CZ 100 fan has been born! Right, 762hurts?
Title: Re: CZ 100
Post by: 762hurts on November 12, 2016, 02:27:34 AM
Yes! 2 on hand and more to come. And once my dumb self figures out 3rd party picture posting. I'm clobbering them everywhere!

Refinishing and coating pictures will ensure that I keep it CZ beautiful!
Title: Re: CZ 100
Post by: jwc007 on November 12, 2016, 12:21:15 PM
And once my dumb self figures out 3rd party picture posting. I'm clobbering them everywhere!

Very simple really.

1) Get a Pic Host account such as Imageshack, Photobucket, or Hunt101.com, the latter which I use.
2) Upload your Pics to your Pic Host Gallery
3) Copy ( keyboard - Ctrl+c ) the Forum Pic Link you get from Your host
4) Paste ( keyboard - Ctrl+v ) the Forum Pic Link into Your post
5) Click on "Save" when done editing

Of course the trick with Photobucket is to just click the "IMG" code, which automatically copies the pic link to your Computer, and all you have to do is Paste ( keyboard Ctrl + v ) into your post.
Title: CZ 100
Post by: Cyanide on November 12, 2016, 12:31:16 PM
Yes! 2 on hand and more to come. And once my dumb self figures out 3rd party picture posting. I'm clobbering them everywhere!

Refinishing and coating pictures will ensure that I keep it CZ beautiful!
Just install the Tapatalk app on your phone, which will allow you to directly upload images straight from your photo gallery albums.

Oh, and you are now relieved of firewatch! Bwahahahaha
Title: Re: CZ 100
Post by: 762hurts on November 18, 2016, 04:22:24 PM
Thanks JWC007 and my Marine brother Cyanide!

I feel that when you collect and handle firearms a lot. Sometimes you find a gun that's relevance in the Today isn't top of the list. But someone may receive one as a family gift, or it's affordable. Whatever reason.

I want to film a newer set of videos for this pistol.

I will edit for brevity.

I'm thinking that bleep Yotube my son keeps making bleep video game vids for. Lol

I'll enlist his help and pay him to keep him interested in quality work.

I'm thinking new vids on.

Operations
Disassembly
Reassembly

FULL Disassembly. I mean full. Pointing out ALL parts on schematic and the best way to do it without damaging parts you cannot replace.

Trigger job to include polishing internals

And a vid on me having all internals of slide and lower coated (maybe NP3)

Why go to such trouble? There are many that upgrade my new Cz's

I found little to help me in my endeavor to learn about inner workings

Apart from all the help I got here from my friend Cyanide of course!

I think if you can buy any CZ online anywhere. IMO it's still relevant.
Title: Re: CZ 100
Post by: Cyanide on November 19, 2016, 12:06:50 PM
Glad you're loving yours as much as I love mine, T!