The Original CZ Forum

CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: armoredman on December 03, 2016, 02:09:59 PM

Title: What holsters fit the P-10C?
Post by: armoredman on December 03, 2016, 02:09:59 PM
Well, right now we're working on guesswork and second hand reports, but I am TOLD that some Glock 19 and CZ P-07 holsters may work. Also, I'm told that High Noon may be on the ground floor on making new holsters for the P-10C, so that would be very cool, indeed.


[Moderator Note:  There was a lot of eager anticipation, mixed with a huge load of hearsay with the P10c introduction in Dec 2016. For that reason a lot of early entries in this thread have been edited and/or deleted. A lot has also changed. The best information is the latest, therefore it may be best to read this thread in reverse. ]

IF YOU POST, THEN PLEASE LEAVE A LINK !
Title: Re: What holsters fit the P-10C?
Post by: Garmanarnar on January 25, 2017, 04:58:46 PM
I am very interested in its compatibility with Glock 19 holsters that support the Streamlight TLR-1 light. I suppose it will be some time before holster makers have P10s in hand and production times will be even longer, with weapon light support few and far between.  I hope to get a Glock/TLR-1 holster in the meantime and have a P10c hiking rig ready to go.
Title: Re: What holsters fit the P-10C?
Post by: brianjkeene on January 25, 2017, 05:19:40 PM
My LGS has had a P10C for last month and I got the chance to try one of my G19 holsters in it - a Zorn Skinny Rig.  I am sad to say that it DOESN'T fit....not even close.  I figured maybe I'd back out the retention screw a bit and maybe it'd fit, but nope. I actually fully removed the tension screw and it wouldn't go in.  To Zorn's credit, their holsters are VERY well made and fit very very closely to the gun so I had my doubts of the P10 fitting.   The guy behind the counter said that he did try his Incog with he P10 and as long as he loosened the retention screw, it fit fine.


With that said, I ordered an Alex and Ryan Designs holster built specifically for the P10.
Title: Re: What holsters fit the P-10C?
Post by: armoredman on March 17, 2017, 12:18:11 AM
High Noon confirmed they are waiting for their very own P-10c to begin making rigs. Those will be awesome.
Too bad about it not fitting your G-19 rig. I'll try it on mine as soon as I get it!

https://www.highnoonholsters.com/
Title: Re: What holsters fit the P-10C?
Post by: O.B.B. on March 19, 2017, 03:23:06 PM
I've got a Bay's leather holster I carried my G23 in and the blue P10C was not even close to going in that holster.
Title: Re: What holsters fit the P-10C?
Post by: whrussell21 on April 28, 2017, 06:38:24 PM
Alex and Ryan Design which is by far my favorite Kydex holster makes them for the P-10C. You would be hard pressed to find a better custom kydex. They are made to order so it takes a little time to get them.

https://www.alexandryandesign.com/
Title: Re: What holsters fit the P-10C?
Post by: Chasam on May 01, 2017, 06:16:24 PM
Received my High Noon holster last week, got confirmation on shipping today on my P10c, Range Day Thursday.

https://www.highnoonholsters.com/
Title: Re: What holsters fit the P-10C?
Post by: dmossman on May 07, 2017, 07:18:01 PM
I bought a comp-tech model made for a Glock 19. It did not fit. But it does fit to other brands I have. Most interesting was a kydex OWB slide for a Glock 26. Fits like a glove.

Title: Re: What holsters fit the P-10C?
Post by: HST on May 10, 2017, 03:25:55 PM
It will fit in an Alien Gear holster for the G 19, fits pretty good until they make one for the P10.

https://aliengearholsters.com/

https://aliengearholsters.com/holsters/cz-p10c.html
Title: Re: What holsters fit the P-10C?
Post by: Gretsch9 on May 11, 2017, 05:35:09 PM
Mine fits in a JM Custom AIWB and a Harry's Holsters AIWB. Both made for a G19.
I have 2 other Glock holsters that it won't fit. I measured the slides top to bottom and the P10 is a little taller than the G19.

https://www.jmcustomkydex.com/

https://harrysholsters.com/
Title: Re: What holsters fit the P-10C?
Post by: charlier26 on May 13, 2017, 07:15:24 PM
My understanding is that the P10c will fit any holster built for the Glock 19.


Yea, that is what I thought and heard too... NOT TRUE. I tried 2 different kydex holsters from my Glock 19, did not fit. Too small for the P-10c. Whatever you do, DON'T slide it into a Serpa hoslter. I almost had to break the holster to get the gun out. I was hoping to use the P-10c at a 3-day tactical course this next weekend, but have no holster as of yet.

Charlie
Title: Re: What holsters fit the P-10C?
Post by: benq on May 15, 2017, 12:46:21 PM
Just received an email blast from Dara Holsters, they are now offering holsters for the P10C.  I like the fold over style holsters versus the pancake style and have holsters from them for 5 of my CZ's. I am not affiliated with Dara Holsters nor received any comps for this post. Just a regular Joe who happens to like their holsters and understand the struggle with finding the right one.

http://www.daraholsters.com/blog/

Good luck!
Title: Re: What holsters fit the P-10C?
Post by: charlier26 on May 18, 2017, 11:53:02 PM
I couldn't get mine to fit in either of my kydex holsters for my Glock 19. I did find one that works. The Crossbreed hybrid holster fit like a glove. I got the belt-slide type with the kydex front shell.

Charlie
Title: Re: What holsters fit the P-10C?
Post by: earlan357 on May 19, 2017, 10:52:21 PM
Fits in my JM Custom OWB2 Holster
Title: Re: What holsters fit the P-10C?
Post by: Indy_Tim on May 20, 2017, 10:37:02 PM
I picked my P10C up yesterday and started to test holsters from my Glock 23 and 21 this morning.  I was surprised that it fit the $10 Glock make holster quite well.  It was tight going into my Kramer OWB scabbard in horsehide and it fit 3 out of my 4 Serpa holsters.  It fit a Serpa holster for a Glock 17/22 but was a bit tight.  It did not fit a Serpa for a Glock 26/27 but was a sort of loose fit into the Serpa holsters for a 21 and 30.  It is not a tight fit in the large frame Glock holsters, but it does have positive retention and I think it would work.  It was a marginal fit for a Mills Tactical IWB holster too.
Title: Re: What holsters fit the P-10C?
Post by: Chasam on May 22, 2017, 01:58:39 PM
After purchasing a holster from a highly regarded maker only to find that the security strap was too short I took a chance on a Fobus VPQ. It arrived today and the fit is perfect and is comfortable.thank heaven my first holster is a perfect fit for My G30s. I highly recommend the Fobus holster to anyone for a well made and affordable holster.

https://www.fobus.com/holsters/taurus/267/vpq.html
Title: Re: What holsters fit the P-10C?
Post by: Gretsch9 on May 24, 2017, 06:58:04 AM
Dara Holsters offers all of their holsters for the P10c.

https://www.daraholsters.com/ 
Title: Re: What holsters fit the P-10C?
Post by: JBLee on May 24, 2017, 10:39:42 PM
The FOBUS paddle holster for the Smith and Wesson M&P full size & 2.0 is a very good fit in a pinch too. The only beef I have is that it is not as good in the area of coverage at the trigger as I would like, but still pretty darn good. The fitting around the frame, slide and front sight is spot on, like it's tailor made in fact.


Title: Re: What holsters fit the P-10C?
Post by: earlan357 on May 26, 2017, 11:20:59 PM
If you carry with a WML, light bearing holsters are more forgiving. 

It fits perfectly in my Armordillo Concealment Lux w/ TLR.

(https://3.bp.blogspot.com/-Z_IZqVJkxjE/WSjnJJBV_7I/AAAAAAAAAm4/QPxGf-YzIj4QKmd5TZViH7C4p1NxGNkyQCEw/s1600/IMG_3317.JPG)

(https://1.bp.blogspot.com/-zuBg-2e5Ync/WSjnJHNbrTI/AAAAAAAAAm0/uBQ5v3aJMGIplEvPfVRbseNlJGaYeheKwCEw/s1600/IMG_3316.JPG)
Title: Re: What holsters fit the P-10C?
Post by: O.B.B. on May 28, 2017, 07:04:51 AM
Looking for a P10C holster. Requirements are:
Kydex
OWB
Belt attachment 1.5"
Full length sweat shield
Kind of expected that there would not be much available yet. Only 2 interesting so far are a Dara and Blackpoint Tactical. Mixed reviews on both. Any other suggestions?

Hidden Hybrid Holsters

http://www.hiddenhybridholsters.com/
Title: Re: What holsters fit the P-10C?
Post by: HST on May 28, 2017, 09:08:13 AM
High Threat Concealment just released OWB for the P 10 .

http://www.highthreatconcealment.com/
Title: Re: What holsters fit the P-10C?
Post by: armoredman on May 28, 2017, 04:45:00 PM
This happened by accident, but while I am waiting to be able to get a holster for the P-10C, this was a happy accident.
While loading up for the range trip, I just on a whim tried the P-10C in a High Noon Close Encounter hybrid for the P-09. It locked in like it was made for it. The back is boned for a completely different gun, but it was just fine. Admittedly it as about half and inch too long for the shorter pistol, but go figure. Sorry for the real fast cell phone pics - my photos are usually higher quality than this.

(http://i16.photobucket.com/albums/b13/armoredman/CZ%20P-10C/Accidental%20holster%202_zpsfm6grvfs.jpg) (http://s16.photobucket.com/user/armoredman/media/CZ%20P-10C/Accidental%20holster%202_zpsfm6grvfs.jpg.html)

(http://i16.photobucket.com/albums/b13/armoredman/CZ%20P-10C/Accidental%20holster%201_zpssg6kizbn.jpg) (http://s16.photobucket.com/user/armoredman/media/CZ%20P-10C/Accidental%20holster%201_zpssg6kizbn.jpg.html)

So, I grabbed the High Noon Slide Guard for the P-09...not a chance, didn't fit whatsoever...weird.
Title: Re: What holsters fit the P-10C?
Post by: cznine on May 30, 2017, 10:34:27 PM
I've found that my Crossbreed holsters for my PPQ  fit well, maybe just a hair looser.
My Safariland GLS 578 (subcompact) Fits perfectly.
My Blackhawk Sera fits tight, so had to loosen the tension screw, and if I file down the hook on the front of the trigger guard just a little, it fits great.
Title: Re: What holsters fit the P-10C?
Post by: BobcatAZ on June 02, 2017, 11:31:36 PM
Anyone have experience with the Blackpoint Tactical leather wing holsters ?

Seems to check all the boxes for my needs, but I hate buying something sight unseen. Kind of pricey, but quality looks good and it's the same holster design and mfg. that Sig sells for their Legion pistols.

https://blackpointtactical.com/
Title: Re: What holsters fit the P-10C?
Post by: BobcatAZ on June 03, 2017, 06:33:55 PM
Blackpoint lists them at $85.00 + shipping. I am in AZ so the slide sweatshield was a must. Reviews claim it's very comfortable due to the leather wings being somewhat flexible. My only concern (aside from price and 5-6 week wait) is whether that flexibility would allow any sagging of any sort.
Title: Re: What holsters fit the P-10C?
Post by: armoredman on June 03, 2017, 10:21:05 PM
I agree - in AZ myself and a sweat shield is a must, which is why I like so many of the High Noon offerings. :) That Blackpoint looks interesting, indeed.
Title: Re: What holsters fit the P-10C?
Post by: Rutherford2 on June 04, 2017, 09:57:34 AM
Holsters that fit:

Garrett Industries STX 2.0 for P07
Armordillo Concealment Lux
Bawidamann AIWB
Seems that pretty much any G17/G19/P07 holster that indexes on the light and not the pistol frame will work.
Squared Away Customs - not available on their website but they are custom making a Niner for the P10 (Level II rig with Safarliand hardware)


Holsters that don't fit:

Raven Concealment Eidelon
Safariland 6354 DO for G17 (does not fit with or without light)
Bravo Concealment for G19 with light
Bladetech OWB for P09 (P07 fits)
Title: Re: What holsters fit the P-10C?
Post by: villdetwink on June 05, 2017, 10:28:04 PM
Blackpoint lists them at $85.00 + shipping. I am in AZ so the slide sweatshield was a must. Reviews claim it's very comfortable due to the leather wings being somewhat flexible. My only concern (aside from price and 5-6 week wait) is whether that flexibility would allow any sagging of any sort.

I have several Blackpoint Tactical holsters, they are my go to OWB kydex holster maker.
Their lead time is 4-5 weeks, but with my previous orders as comparison they usually ship in 3.
I ordered my LeatherWing on 5/23 and got my shipped notification today...should have it by the end of the week!

I have seen no sagging with any of my holsters, they are very well made and rock solid.
Title: Re: What holsters fit the P-10C?
Post by: Thebillsman on June 05, 2017, 10:37:40 PM
Just got my P-10 today and it seems to fit nicely into my CloakTuck with a P-01 kydex mold. It's a little snug but it should do until they offer one.
Title: Re: What holsters fit the P-10C?
Post by: BobcatAZ on June 06, 2017, 12:24:58 AM
Thanks for the Blackpoint Tactical info. I have been looking online at what's available for the P10C and their Leather Wing seems like the best choice for me compared to others I had seen. I will be ordering one tomorrow unless anyone has another suggestion.
Title: Re: What holsters fit the P-10C?
Post by: HST on June 06, 2017, 07:48:03 AM
Wright Leather Works is making holsters for the P10c, also Mitch Rosen Holsters is making them as well.  That's if you're looking for a nice leather holster....

https://www.wrightleatherworks.com/

https://mitchrosen.com/products/holsters/
Title: Re: What holsters fit the P-10C?
Post by: rich63 on June 06, 2017, 10:07:35 AM
Thanks for the Blackpoint Tactical info. I have been looking online at what's available for the P10C and their Leather Wing seems like the best choice for me compared to others I had seen. I will be ordering one tomorrow unless anyone has another suggestion.

I have 4 holsters with the leather wings from Blackpoint Tactical. I can tell you of all the holsters I have from different makers, Blackpoint Tactical holsters are the best in my opinion. If you are in need of mag pouches try their M.A.P. Modular Accessory Pouch. I have these also. These have the leather wings as well. Great stuff.

https://blackpointtactical.com/
Title: Re: What holsters fit the P-10C?
Post by: BobcatAZ on June 06, 2017, 06:25:37 PM
Blackpoint Leather Wing has been ordered. I wanted to thank those who posted their experience with BPT. Waited 6 months for the P10C so 4 or 5 weeks for a good holster won't kill me. Wanted Kydex for this one but I did check out Wright Holsters as posted by HST. Really nice leather but the wait time on those is 8-10 weeks!
Title: Re: What holsters fit the P-10C?
Post by: gunkucool on June 08, 2017, 09:54:01 AM
Also, would someone share about the pocket holster? How do you feel when you walking, working, etc..? Thanks in advance.
Title: Re: What holsters fit the P-10C?
Post by: Gretsch9 on June 09, 2017, 07:01:22 AM
 I slightly modified my Raven Eidolon and it now works for my P10c. There are 2 small bumps that protrude just under the sight channel. I think they offer support to the top of the slide or a guide when holstering.Idk
The P10 slide is slightly taller than my Glock, by 2mm at the sight base if I remember correctly.I dremeled and sanded the bumps at the contact  points of the P10 slide until it fit underneath without rubbing and it fits like it was made for it. It also has had no affect in fitment for my G19.
Title: Re: What holsters fit the P-10C?
Post by: Lenwood on June 10, 2017, 02:23:31 AM
There are several companies building holsters for the P10c right now.

There is a problem to be aware of though. The blue gun version is about 20/1000 off in size. This means that many of the tight fitting kydex holsters will be produced much tighter than they should be for reasonable retention and draw stroke.

I'm the owner of Lenwood. We build holsters for the P10c and if my designs are what you are looking for I'd be proud to build one for you.

https://lenwood.com/shop/holsters/
Title: Re: What holsters fit the P-10C?
Post by: Brews_and_Pews on June 23, 2017, 09:36:30 AM
We're now offering holsters for the P10C at Alpha Concealment Systems. Pictured here is our Phoenix Ultimate IWB holster in Red Carbon Fiber. You can check out all the different holster styles at... 

http://www.alphaconceal.com/

(https://uploads.tapatalk-cdn.com/20170623/44e5b5c918cf3e9b12ec87466d10c951.jpg)
Title: Re: What holsters fit the P-10C?
Post by: JConnor93 on June 25, 2017, 01:06:47 PM
Alex and Ryan Design which is by far my favorite Kydex holster makes them for the P-10C. You would be hard pressed to find a better custom kydex. They are made to order so it takes a little time to get them.

https://www.alexandryandesign.com/

How are their holsters with soft loops? I don't like that bigger clip style.
Title: Re: What holsters fit the P-10C?
Post by: Bossgobbler on June 28, 2017, 05:56:26 PM
Just received my IWB N8 Tactical holster for my P10C.  A Glock 17 holster fits like a glove. 

https://n8tactical.com/

(http://i1328.photobucket.com/albums/w537/Bossgobbler2/IMG_0497_zpsujxafkzl.jpg)

Title: Re: What holsters fit the P-10C?
Post by: armoredman on July 02, 2017, 06:09:57 AM
That is one oddball looking rig!  :o 8) How does it carry? Easy to draw with the grip completely covered on one side? The see through plastic is different...
Title: Re: What holsters fit the P-10C?
Post by: walker2713 on July 05, 2017, 07:30:02 PM
The Safariland 578 GLS Pro-fit holster accommodates my CZ P10c very nicely....it's not snug, but locks in and can only be released by the GLS retention lever under the middle finger. I plan to use it for  IDPA and steel plate matches.

(Edit) Now that I"ve actually read the owner's manual ::)...a simple hex screw adjustment, with the wrench provided, makes the pistol fit snug as a bug in a rug...and still release easily on the draw.

Very satisfied.
Title: Re: What holsters fit the P-10C?
Post by: armoredman on July 06, 2017, 07:07:50 AM
I have never tried it with a P-07 holster, but it fit one of two P-09 rigs, one perfectly, the other, not at all and the guns are not similar in shape. It's known that generally Glock 19 rigs may fit, but if you go back through this long thread and you will see that some do, some don't. High Noon Holsters is now making holsters to fit the P-10C. :)
Title: Re: What holsters fit the P-10C?
Post by: walker2713 on July 06, 2017, 10:31:27 AM
Safariland fit charts....

https://safariland.com/pages/holster-will-fit-charts
Title: Re: What holsters fit the P-10C?
Post by: Ran on July 08, 2017, 05:49:27 PM
I made this leather one.  Used it today for an IDPA match, and it worked great.(https://uploads.tapatalk-cdn.com/20170708/0cae55260814ce1da62b4f39b68c215f.jpg)(https://uploads.tapatalk-cdn.com/20170708/fad40626667043aa17a28e691079e003.jpg)

Sent from my XT1565 using Tapatalk

Title: Re: What holsters fit the P-10C?
Post by: armoredman on July 09, 2017, 02:00:54 AM
Very nice work!
Title: Re: What holsters fit the P-10C?
Post by: armoredman on July 09, 2017, 07:12:52 PM
High Noon Holsters

https://www.highnoonholsters.com/

(http://i.imgur.com/DinFpwQ.jpg)
Title: Re: What holsters fit the P-10C?
Post by: Guardsix6 on July 12, 2017, 11:09:12 PM
Just received my TR Holster for my CZ P10c. The holster fits great, very snug on the pistol, but easy to draw.  It also fits tight against my hip at about the 3:30 - 4 o'clock position.  Overall, this Holster with my CZ P10c makes a very small and concealable package.  I would highly recommend.


http://trholsters.com/
Title: Re: What holsters fit the P-10C?
Post by: chadbrochills on July 19, 2017, 01:43:11 PM
Newb here. Just got my FDE P10C last Friday, put 250rds through in on Sunday and loved every minute of it.

That being said, I currently carry a Shield 9mm with a Vedder AIWB holster. I contacted them about a holster for the P10C and they said it's going to be a little while but it is in the works.

I also sent them a pic of my CZ with the Inforce APLc as a suggestion that they make a light bearing holster as well. We'll see how it goes.
Title: Re: What holsters fit the P-10C?
Post by: TheBarkingCat on July 22, 2017, 10:21:22 PM
I have a Phlster Classic and my P10c fits perfectly.

https://www.phlsterholsters.com/shop/phlster-classic-holster/
Title: Re: What holsters fit the P-10C?
Post by: Deetroit on July 26, 2017, 02:32:19 PM
FYI:  Alien Gear Shapeshift for Glock 19= NO
Title: Re: What holsters fit the P-10C?
Post by: Jammers1971 on August 03, 2017, 06:44:31 PM
http://clearwater-tactical.com/product-category/holsters/

Decent pricing. The one I've seen was well done. Veteran made.


Clearwater Tactical (FL) is now Neptune Concealment (TN)

https://neptuneconcealment.com/
Title: Re: What holsters fit the P-10C?
Post by: JACK_89 on August 03, 2017, 08:51:54 PM
I have a t-rex arms sidecar for the cz p-09/p-07 with an X300, and with the X300, it fits the p-10 just fine.

I have a glock 19 with an aplc holster coming tomorrow, i'll try to remember to post if that fits too.
Title: Re: What holsters fit the P-10C?
Post by: chadbrochills on August 04, 2017, 12:02:24 PM
My understanding is that the P10c will fit any holster built for the Glock 19.


This has been discussed a lot. It's hit or miss. Guy I met also has a P10 and G19. Has a few holsters for the Glock, but he said the P10 didn't fit them all. The P10 is slightly longer than the G19.
Title: Re: What holsters fit the P-10C?
Post by: r1dramma on August 04, 2017, 07:41:04 PM
Just received my Blackpoint Tactical

https://blackpointtactical.com/  and Amazon

(https://uploads.tapatalk-cdn.com/20170804/099788291451989c347be576879f865b.jpg)

(https://uploads.tapatalk-cdn.com/20170804/b7a02b2a706a9ad775428f9d1698def6.jpg)

(https://uploads.tapatalk-cdn.com/20170804/c891d50b93e59e0aa24d84848be23b61.jpg)

(https://uploads.tapatalk-cdn.com/20170804/df9e1703ab2736287c4d1084c0f0e998.jpg)

(https://uploads.tapatalk-cdn.com/20170804/1e337069672c0e0d3bbd57c17144ff99.jpg)
Title: Re: What holsters fit the P-10C?
Post by: BobcatAZ on August 06, 2017, 02:03:47 PM
That Blackpoint looks good! Of course I would say that because I have the same one. I did have to shave my Kmart Special gun belt down 1/16" on a bench grinder to fit the 11/2" metal loops. A stiffer belt and a smaller spare tire would probably improve things but overall great quality, good retention and very comfortable.
Title: Re: What holsters fit the P-10C?
Post by: CDKJudoka on August 07, 2017, 10:29:09 AM
My P10c didn't fit in any of my Glock or P-07 holsters, but it does fit in the kydex holsters made for my SIG P320 Compacts. Like a glove. I am using my AIWB until my Clinger comes in.
Title: Re: What holsters fit the P-10C?
Post by: nova3930 on August 16, 2017, 07:52:52 AM
Anyone got a line of P10 holsters with Surefire XC1?  IWB or OWB.
Title: Re: What holsters fit the P-10C?
Post by: jdchen0407 on August 17, 2017, 06:56:37 PM
Does not fit in a Bravo Concealment OWB holster.  =(   anyone know of a IWB or OWB kydex holster that it fits?   I am running it with a INFORCE APLC
Title: Re: What holsters fit the P-10C?
Post by: oldfrank on August 18, 2017, 01:21:04 PM
This $29 holster I bought on ebay for my G19 fits great.
I have a hard time believing what some want to charge for a simple designed kydex holster. (https://uploads.tapatalk-cdn.com/20170818/e5a927546ce168e0bbf782c1c71979cf.jpg)

Sent from my XT1585 using Tapatalk

Title: Re: What holsters fit the P-10C?
Post by: Batt 57 on August 19, 2017, 09:33:36 PM
FYI:  Alien Gear Shapeshift for Glock 19= NO

It fits the standard shell for the P-07 better than the G19 shell. I have them both.
Title: Re: What holsters fit the P-10C?
Post by: chadbrochills on August 21, 2017, 04:57:16 PM
Does not fit in a Bravo Concealment OWB holster.  Anyone know of a IWB or OWB kydex holster that it fits?   I am running it with a INFORCE APLC.


I'm running the same light. Here's a few I've found so far:

IWB:
http://miholsterco.com/stealth
http://www.shookscustoms.com/product/spicy-taco-inside-the-waistband-light-bearing
https://www.alexandryandesign.com/product/appendix-lightbearing-iwb-rcs-claw/
http://legacyfirearmsco.com/centaur-appendix/

OWB:
http://www.shookscustoms.com/product/hot-cakes-outside-the-waistband-light-bearing
Title: Re: What holsters fit the P-10C?
Post by: Toby196 on September 04, 2017, 12:32:45 AM
I breezed through the thread pretty quickly, so I apologize if someone already posted this info.  Of the 3 "decent" holsters I have, this is what I've found:


1) My old (like 10-15yrs old) Blade-Tech IWB for a G19 will not fit at all (way too small for the gun).

2) My Comp-Tac MTAC for my G19 just barely fits, but it's really tight - far more than I'd like or be comfortable with.

3) My Comp-Tac MTAC for my G30, with the retention screws tightened down, fits great (nearly perfect).


If I end up up using my P-10C as my EDC gun, I definitely plan to use the G30 MTAC, instead of spending extra money on a holster that's designed specifically for the P-10C.



9/5/17 - Edited to Add: I know it's been decent amount of time since this thread started (and the P-10C has been out), so I guess it's not surprising that more and more holster makers are making P-10C specific holster.  Just as an example, I just took a look at Comp-Tac's site, and most of their holsters are now available for the P10C, including the MTAC's replacement "spare bodies", which is a nice option if you already have a current generation MTAC that you want to convert ($25 for the replacement body vs. $81 for a whole new MTAC).
Title: Re: What holsters fit the P-10C?
Post by: Wink57 on September 14, 2017, 08:35:25 PM
I just purchased a really nice IWB from Tulster.  They just started making them for P10c.

https://tulster.com/

(https://uploads.tapatalk-cdn.com/20170915/fa226dc907cf62b1c231cebfa1f7a884.jpg)

(https://uploads.tapatalk-cdn.com/20170915/01a1256b3bd05fd87b88363051c545e3.jpg)
Title: Re: What holsters fit the P-10C?
Post by: DartonJager on October 01, 2017, 08:45:34 PM
Does anyone know if Blackhawks new "Omnivore" universal holster will fit the P10c ? It's advertised as being able to fit 150+ different HG's, or supposedly nearly any HG with a under rail.
Title: Re: What holsters fit the P-10C?
Post by: HST on October 04, 2017, 02:42:08 PM
Vedder Holsters just released there lighttuck IWB holster for the P10c. Just ordered mine and it's on the way. I have one for one of my other guns, nice stuff !
Title: Re: What holsters fit the P-10C?
Post by: diernosaj on October 12, 2017, 02:45:02 PM
Ordered the Vedder Light Tuck IWB American Flag print on the 9th.... Waiting patiently.  Will post pictures once I get it.  Got about 100 rounds through my new p10c I picked up Wednesday.  Shoots amazing. 
Title: Re: What holsters fit the P-10C?
Post by: chadbrochills on October 13, 2017, 11:06:34 AM
Ordered the Vedder Light Tuck IWB American Flag print on the 9th.... Waiting patiently.  Will post pictures once I get it.  Got about 100 rounds through my new p10c I picked up Wednesday.  Shoots amazing.

I have a Vedder Light Tuck for my shield and love it. I'd order one for the P10C if they would make a light bearing model, but they said they don't have any plans to do so as of yet. :(  They're somewhat local to me so I wanted to support them again but it looks like I might have to order one from a different company instead.
Title: Re: What holsters fit the P-10C?
Post by: Roblamont80 on October 17, 2017, 10:17:40 PM
I can confirm the Blackhawk retention holster do not work, I even removed the retention screw.
A previous post claimed the p10c wouldn?t fit a Bianchi model 100 IWB holster. Mine fits great. I have Bianchi holster for all my pistols. Some of them are very tight, especially the ones for 1911?s. To listen them up and break them in quick, I put my unloaded pistol in a thin sock and force it in the holster. I wear the holster around the house for a couple of days and switch to a thicker sock for a couple more days. I know it sounds crazy but it will stretch and break in these holsters pretty quick.
Title: Re: What holsters fit the P-10C?
Post by: armoredman on October 21, 2017, 02:50:23 AM
Yes, mine didn't fit my M-100 for the G-19, just not quite in there. I stretched it a bit with water and plastic baggies and it will work now.
Title: Re: What holsters fit the P-10C?
Post by: Slateman on October 21, 2017, 08:28:05 PM
So I have a CompTac MTAC for a VP9 that fits my P10. Sits about the same level as a VP9 and I haven't noticed any issues with it so far. Been IWB carrying for about a month at this point.
Title: Re: What holsters fit the P-10C?
Post by: rmi63 on October 29, 2017, 01:04:30 PM
New member here and was wondering if anyone knows of any Safariland ALS holsters that work with the P10C? The Safariland ALS holster is all I use for OWB carry for all my HG's so I'm really hoping I can find an ALS that fits a P10c.
I also have heard the P10c will fit well in a Glock 19 combat holster, can anyone confirm this as true?

Thanks,
DJager/Art.

I have just tried in a ALS hoster for the M&P and it works surprisingly well.  The retention works and I have no problem drawing from the holster.

(https://lh3.googleusercontent.com/XcXr6kE6T_PCQuem9I6vdc8FVBZl3gTWsKrDS9ITaBpuLi2Q5m4Fg_G_TgqQi6CglKu5yBxMNAUFAW75EgJRu_LHM7GbCqNugd1MD_aMY-R5izHbx50DpGjTzHdmK0RNCXN1fQ_tXWmzQA3gzAnnmuu2AzVK2O0c0R11GvQ6XyfwvK7yas2GSzEYzv3DzI_w2ZK_gVPOHtgwWh8l0ylxCKkkV3W68Gcw0tk4p2vBcd_IzQhsCqLWz85R7huppQ_HTDSyp8IMQntrINAlZ4y4_oX0lXzd3MDEA6WjsKBfKE5xTeJiEUCsXpuO1Z7-0eAPPKD3UgQrkvRAG4kZgC39d_l8K56f0tZsFyaLvk7lypePsuCWPvyzVJH9Izqb0G6kAiKUSqg2MJzqMnlbwUsdeqCqpCYxVD0b-cP7xL6-b9F8pSycqCnvfGFJ1eRgCp16f6QNhoRu1-Yo_993OCMBc_QpqioWvWYuGzp8dNI5-fU0ewGYgWi36YGbfA1zlXZvNnzdpeYE2JorDJpJj0P1u3qunpDX0z10cIYz-0AEfhqs0PzPjeBpYEuuXTaIbO-OKA4fdFAs7lAO8ePpSwqOeaIOn6wmFd1MGA32WTDg6Q=w1695-h949-no)
(https://lh3.googleusercontent.com/9iQeIB3HFPjqP9zHWGr-mvRITst0Qqglt9JLlEcW5iqQg-D-lWDOYusbxIX-iKGu7l-3BEwVTgCu2fGoYwEhAP0lh_tLOdrD_k_T1uqmSoY5dMRp-kXhj2UoEohcOVyVRpnjs1c8eI2ns1fF7EJVCoMDu17yKvpgTrIIUTAVGkGaP5zNixsr_oQQin1C_q3CfckF2ODXU80oJm0OKG4mal6wEsfROkFSKAvw_4GIjr8ul5629vEFk7Dk7Uq527Md3KyHwd8SELoqHjlkiUU5F1VXC5xHZWozdVMpyjzRE4azAMlXeo9s649i1VqdX9Kli5dK481IY69boddzvYaSD0kwPzUEhPr-_Y2ZGauZXg2uTfFGuvaLxP7CK6Clg1BLLBgU2tdcQp5XVFNaoj_z1BOE-8zdko3HqHzxCnLdvu7XpqDkEVTZhveTuijv558-34AM_hQznFdA3rk5-l-ZgLnr4k4MQ9viYKqlkSy2yxB4w8RUYQbOl5cx4EY3OSAl6PAmvD7bpCHeB0MQVd4cHwZcV7T_vBQtoxXnfSZk87PsbRtty9oyd66BmfStR548OVn1kimk5xw81Bp4Dm3ou3-lrufnJM7lHiPkydCVWg=w1695-h949-no)
(https://lh3.googleusercontent.com/o12lKTS3Nnofv89Zhs7LkVHNQ8pgdy9QVkh78rQpYYcXwYXrMbkB0Noy_iucKnBB_kEKBu58RXfAOc35kNdHuBrmhsljXof9Am7iLbebdzF8KsLANK8cpQuKTmzVd-EQvCP3heqioLC2O-pq3umE7AflspsFFzDCmhMBG5Z4M3M8lvyke6UCWcQ1dgir0H7TIaEwLEaGuS4s2iqTOAqf-M0-wwiW5YlMzt9Y_2qdWxU9CcZzgt_9d2t8edoE7n8Qt7hVPxbty9Pq_wURL90rBIacEmx4iEhLW8tTI0bG6i2R3zqITBx-Jc4nmtXAVxmZ_JVo9n_Q_FAWb9oMDuMMHX4TvP0CUFdzCmxncgrVt82zUq4FbG2ZuWCWYNLn0lFPyTZZYzfsmZ3Ke27lJngDE5E0w7Fi0kEV-Wtesf5e6mBuqu-OyqWgV4-9Qn1NPaKH2EiU7WiB-BRWvJAkAmVZD4nxFyxgoZOXz11xJQMPr4UXq5cIo0hw3HUPJhxDckpNEJroCKmMaXNDjwtHGKYlBlpkKX__zGNhERx4_W7AiO84lgMQad66KqznMLZOaUF2CgponWbgiG9G9tRl4Xs7MxNyHD1bq7-G8d2RlxSuyA=w532-h949-no)
Title: Re: What holsters fit the P-10C?
Post by: gunkucool on November 05, 2017, 09:53:45 AM
Have some of you have experience with pocket holster such as desanti nemesis, galco, desantis soft ....etc...? If you do, would you please what is suggested. Thank you,
Title: Re: What holsters fit the P-10C?
Post by: denny on November 10, 2017, 12:01:33 PM
I have tried and confirmed a safariland 6378 with light (surefire x300u) works with p10c.
Title: Re: What holsters fit the P-10C?
Post by: y@k on November 15, 2017, 12:43:07 PM
I don't know if anyone posted yet but the Safariland ALS for a Glock 21 fits like it was almost meant for it. Tighten down the retention screw,  and money.
Title: Re: What holsters fit the P-10C?
Post by: r1dramma on December 03, 2017, 03:06:07 AM
JM Custom kydex makes one for the P10c...

(https://uploads.tapatalk-cdn.com/20171203/2ef31c1b0ffb5d5c61393ef8450b3f88.jpg)

(https://uploads.tapatalk-cdn.com/20171203/9fae0c90556bb8110279b4382ec83347.jpg)
Title: Re: What holsters fit the P-10C?
Post by: MyhobbiesR2expnsv on December 11, 2017, 04:21:18 PM
I use the Safariland gls 578 compact (standard also fits). Has a tiny bit of play but locks in and releases perfectly. Blackhawk holsters for g19 do not fit. I tried.
Title: Re: What holsters fit the P-10C?
Post by: Rickytick on December 18, 2017, 02:26:29 PM
ARES Holster shown for the CZ-USA P-10 C , Right Hand Draw, in Lonewolf Gray, with Black Enhanced Triad Spartan 1.75" Clip, ZERO Degree Cant Angle, with Talon Claw.
Anyone try a triad holster??
Title: Re: What holsters fit the P-10C?
Post by: ragingbulldaily on January 08, 2018, 02:10:21 PM
Might you share a picture of your p10-c in the serpa holster?.... Please. I ended up going with a Black point leather wing. I miss greatly the ability to lock it up... Thanks

Sent from my ONEPLUS A3000 using Tapatalk

Title: Re: What holsters fit the P-10C?
Post by: r1dramma on January 16, 2018, 08:20:59 PM
Black Arch OWB

https://www.blackarchholsters.com/   Also check Amazon

(https://uploads.tapatalk-cdn.com/20180117/9b14a623a9066a80d03885c6e2875b81.jpg)

(https://uploads.tapatalk-cdn.com/20180117/53e0bcc3be51ad4a2716c058e77ea319.jpg)
Title: Re: What holsters fit the P-10C?
Post by: jertex on January 19, 2018, 06:59:28 PM
I picked up a P-10C used & I wanted a leather, pancake holster for OWB that would fit tight to my body for concealment. I decided to try a 1791 Gunleather holster that was made for the Glock 19/23 to see how that would work since P-10C's are supposed to fit Glock holsters. The holster came in today and I was pleasantly surprised by the quality of the holster for $49 shipped. It is well made, double stitched at the right places and the leather is excellent. My P-10 was very tight at first and I couldn't draw the pistol without giving myself a wedgie. I wrapped a zip lock bag around the pistol & pushed it into the holster as far as it would go and left for a couple of hours. Now the the gun is tight with good retention but not a problem to draw. It holds very tight to my body and conceals extremely well. I'm very pleased.
(https://photos.smugmug.com/photos/i-cRTPG2z/0/02c55f1a/L/i-cRTPG2z-L.jpg)
(https://photos.smugmug.com/photos/i-6gCLV9F/0/ee941d21/L/i-6gCLV9F-L.jpg)
(https://photos.smugmug.com/photos/i-ts9gVH4/0/94b7492f/L/i-ts9gVH4-L.jpg)
Title: Re: What holsters fit the P-10C?
Post by: Vernonion on January 23, 2018, 10:17:13 PM
Vedder Holsers

https://www.vedderholsters.com/cz-p-10-c-holsters/

(https://imagizer.imageshack.com/v2/300x200q180/922/CZlFqZ.jpg)

Vedder adds a concealment claw!
Title: Re: What holsters fit the P-10C?
Post by: thumper338 on January 25, 2018, 04:40:48 PM
I bought one of these for my p10c

https://www.fiercedefenderholsters.com/collections/premier-holsters/products/awesome-named-iwb-kydex-holster

They also have holsters for P07, P09, P01 and SP01

(http://)

--thumper
Title: Re: What holsters fit the P-10C?
Post by: lefty556 on February 05, 2018, 05:32:36 PM
Renaissance Firearms in Arlington, TX has a mold for the P10C.  I stopped by and looked at the first prototype last week.  As I've come to expect from Chip, the quality and fit were excellent!  I should be able to pick my holsters up later this week.

http://renaissancefirearms.com/holsters/
Title: Re: What holsters fit the P-10C?
Post by: gunkucool on February 08, 2018, 11:09:24 PM
Kydex from ebay. It is perfectly fit and click in it.

(https://i.imgur.com/RrGAIQY.jpg?1)
Title: Re: What holsters fit the P-10C?
Post by: Indy_Tim on February 11, 2018, 12:44:18 PM
I recently picked up a Kramer OWB Scabbard in horsehide for a G30sf and found that my P10C is a good fit as well.  I have the same holster for my P07s and the P10C fits in that one too.  That gives me at least 3 excellent carry options for the P10C with Kramer scabbard holsters in that it carries well in the G23, G30sf and P07 holsters.
Title: Re: What holsters fit the P-10C?
Post by: r1dramma on February 15, 2018, 05:24:32 AM
Kydex from ebay. It is perfectly fit and click in it.

(https://i.imgur.com/RrGAIQY.jpg?1)

I like the grip tape, who makes them?

Sent from my SM-T810 using Tapatalk

Title: Re: What holsters fit the P-10C?
Post by: StealthyTX on February 17, 2018, 02:27:28 PM
Anyone out there with the P10c threaded barrel/suppressor sight version have an OWB concealed carry holster to recommend?

I was going to get the regular version, but I have an Omega 9k in jail right now, and $14 difference in price for a threaded barrel and suppressor night sights was too good to pass up!
Title: Re: What holsters fit the P-10C?
Post by: clinttho on March 07, 2018, 09:45:35 PM
Yeah most leather g19 holsters I?ve found work with my P10c. The Galco Summer Comfort works but lacks the sweatshield. Sill a favorite of mine.
Title: Re: What holsters fit the P-10C?
Post by: r1dramma on May 13, 2018, 08:08:16 PM
Black Arch Holsters 

https://www.blackarchholsters.com/

(https://uploads.tapatalk-cdn.com/20180514/7f623533228923da49da3a2958b52248.jpg)
Title: Re: What holsters fit the P-10C?
Post by: rccooley on May 25, 2018, 10:36:17 PM
New one for the list. Tier 1 Concealed Agis. Amazingly comfortable appendix carry holster. Conceals well on me. I?m about 5? 11?, 170 lbs, 31? waist.

(https://uploads.tapatalk-cdn.com/20180526/91b20cb72b06a002b6bf3442e29797ae.jpg)


https://www.tier1concealed.com/
Title: Re: What holsters fit the P-10C?
Post by: Lostinthewoods on June 25, 2018, 10:04:16 PM
Received a CompTac International OWB today.  I plan on using it for USPSA production.  It arrived several days ahead of schedule.  I own a bunch of kydex holsters but this is my first CompTac.  I'm pretty happy with it.  The fit is great.  I will heat it and tweak the trigger guard engagement (circled in red) for a more positive retention without tightening the fit.  The inside is very smooth.

The drop-offset hanger is pretty nice for a plastic part.  It gives me more room for my thumb when drawing that the equivalent Blade Tech part.

The belt loop is about as solid as the equivalent Blade Tech part.  It comes with a paddle that I probably won't use but seems very serviceable.

The only thing I would change is the back part that is outlined in red.  It is superfluous and only gets in the way for my purpose.  I will trim and refinish the edge.

Here are some pics:

(https://uploads.tapatalk-cdn.com/20180626/da4081d28e1e7e98177409dafb951d72.jpg)

(https://uploads.tapatalk-cdn.com/20180626/3cf9fecc6b69313ecea93d985afc1e68.jpg)

(https://uploads.tapatalk-cdn.com/20180626/a867348f8513a982935e730a6e62024a.jpg)

(https://uploads.tapatalk-cdn.com/20180626/73cd0e5f337ab0c7a8eea494bae9473f.jpg)

(https://uploads.tapatalk-cdn.com/20180626/d76379068969b00d514f5699fc5ea7f9.jpg)

(https://uploads.tapatalk-cdn.com/20180626/a21a7ffd00447ba9b05fcdb11665c7ee.jpg)

Title: Re: What holsters fit the P-10C?
Post by: Crawl on July 16, 2018, 09:05:47 PM
A Glock 17 in the Serpa is loose enough to slide in but snug enough to not jiggle. You may find that the H&K USP holster is a little snug on the P10c. However, it does fit.

Sent from my HTC U11 using Tapatalk

Title: Re: What holsters fit the P-10C?
Post by: d-tronics on July 16, 2018, 10:45:25 PM
I would still choose the Serpa over anything else. I use it for open carry and for training classes that include rifle to pistol transitions.

I prefer the Serpa over all other Holsters that I have tried. If you want to carry OWB

Sent from my HTC U11 using Tapatalk
Sorry, I should of been more specific. I mean between the hk usp or the g17 seeps holster.

Sent from my HTC One M9 using Tapatalk

Title: Re: What holsters fit the P-10C?
Post by: Crawl on July 16, 2018, 10:48:13 PM
The G17 holster does not fit the P10c. I was comparing the fit of a holster, made for a specific gun, to a holster co-opted for another gun.

Sent from my HTC U11 using Tapatalk

Title: Re: What holsters fit the P-10C?
Post by: cstellabott on July 17, 2018, 12:14:57 PM
Priority one holsters, not bad for $39, Shooks has top quality stuff, but this works tho,..

(https://uploads.tapatalk-cdn.com/20180717/3019f8edf16fae1a54092836d4a47830.jpg)
(https://uploads.tapatalk-cdn.com/20180717/e34c3eee5bb99c4bdb13f71a495275a8.jpg)

good retention, rec'd 3 days after ordering.

Title: Re: What holsters fit the P-10C?
Post by: Nicefish on August 04, 2018, 11:38:15 AM
I have a White Hat Holsters Maxtuck that I've used for the last 4 years (pretty much everyday) for the last four carry guns I've had.  Once you buy the holster (about $65) you can buy extra kydex pouches for other guns ($20).  For $5 extra you usually can get the pouch molded to fit specific lights/lasers.  They make one for the. CZ P10c - I have one on order.
Title: ConcealedConcept IWB Kydex for Glock19 / P-10C Great Fit
Post by: Sidecar2 on September 09, 2018, 11:41:26 AM
I like Concealed Concept Kydex IWB holsters, available on eBay.

I ordered the "Glock 19/23/32" model ($25.99 delivered, and fast) but added a note to the seller that it was for my CZ P-10C just before hitting "Purchase." At worst, I though I was going to need to break out my heat gun and reform the Kydex to fit the P-10c.

What arrived in the mail a few days later fits my P-10C perfectly. Though the P-10c in not listed, this holster has to have been formed on a P-10c. Every nook, cranny, the trigger guard, the front and rear slide serrations, the ambi slide releases -- everything is impressed into the Kydex. Also has a full sweat shield.

This supplier is vet-owned, made in USA and very responsive. Great seller. This is my third holster from him. They're all good and work flawlessly. They have adjustments for tightness and an extra roomy sight groove if you have really tall sights. 

His ebay site is https://www.ebay.com/itm/IWB-KYDEX-HOLSTERS-FULL-SWEAT-WITH-ADJUSTABLE-RETENTION-GUARD-CONCEALED-CONCEPT/282813562546?ssPageName=STRK%3AMEBIDX%3AIT&var=582138452699&_trksid=p2057872.m2749.l2649

(https://i.imgur.com/0yYDuBi.jpg)

(https://i.imgur.com/iCSWD2g.jpg)

(https://i.imgur.com/E2h0VGx.jpg)


http://concealedconcept.com/
Title: Re: What holsters fit the P-10C?
Post by: tomrkba on September 12, 2018, 12:30:25 PM
My Milt Sparks Criterion for Glock 19 works almost perfectly.  I will use it while I wait for a dedicated P10C Criterion.


The P10C does NOT fit in the Raven Concealment Eidolon.  It also does not fit into El Paso Saddlery Dual Duty for Glock 17 (snap won?t close).
Title: Re: What holsters fit the P-10C?
Post by: CZ_FANATIC on October 09, 2018, 12:01:33 PM
I have a Shook's Custom OWB for my P-10C
Title: Re: What holsters fit the P-10C?
Post by: chadbrochills on October 22, 2018, 03:30:11 PM
Posted pages ago some links for the P10C/APLc light combo but I've since switched to the OLight PL-Mini.

Anyone have an IWB holster for that combo?
Title: Re: What holsters fit the P-10C?
Post by: Nicefish on October 22, 2018, 08:55:29 PM
Posted pages ago some links for the P10C/APLc light combo but I've since switched to the OLight PL-Mini.

Anyone have an IWB holster for that combo?
White Hat Holsters has some - select CZ P10c, select light/laser options.  The kydex mold only costs $5 extra.
Title: Re: What holsters fit the P-10C?
Post by: Cyanide on November 03, 2018, 01:49:17 PM
Think I?ve finally found the holster for me over all others, good ol? Stealthgear! This one is the P-10C appendix IWB model but carries very well at the 4 o?clock position. It?s very comfortable with excellent retention, and combined with a good (gun)belt makes it feel like I?m not carrying at all. Now to start getting them for my other family members, well worth the money!!!

(https://uploads.tapatalk-cdn.com/20181103/74ede391da49694a285e00fd8f716f4a.jpg)

(https://uploads.tapatalk-cdn.com/20181103/7a596c03e05ad8116173dc39b35ee7ca.jpg)
Title: Re: What holsters fit the P-10C?
Post by: rwl1955 on November 17, 2018, 06:26:58 PM
picked up my new P10C today and it doesn't fit in my Mitch Rosen or Serpa holster. Bigger than my G19 but trigger is better.
Title: Re: What holsters fit the P-10C?
Post by: rwl1955 on November 20, 2018, 02:20:56 PM
https://mk-tekholsters.com/products/cz-p10-c-iwb-holster

https://mk-tekholsters.com/
Title: Re: What holsters fit the P-10C?
Post by: CzechEm on January 15, 2019, 06:41:45 PM
Does the G19 version of this fit the P10C?

https://blackhawk.com/products/holsters-accessories/holsters/concealment/injection-molded/standard-a-r-c-iwb-holster (https://blackhawk.com/products/holsters-accessories/holsters/concealment/injection-molded/standard-a-r-c-iwb-holster)
Title: Re: What holsters fit the P-10C?
Post by: Joe Allen on January 16, 2019, 11:51:58 AM
Amazon was blowing out a Hogue ARS Stage 1 for P10 and it works great - also fits the F perfectly.  Even at regular price - $50 - it's a good Level 1 Retention holster for anyone OCing or carrying the P10 for work.

https://www.hogueinc.com/holsters
Title: Re: What holsters fit the P-10C?
Post by: Crawl on January 17, 2019, 03:01:18 PM
Does the G19 version of this fit the P10C?

https://blackhawk.com/products/holsters-accessories/holsters/concealment/injection-molded/standard-a-r-c-iwb-holster (https://blackhawk.com/products/holsters-accessories/holsters/concealment/injection-molded/standard-a-r-c-iwb-holster)
The G19 version of the Blackhawk Serpa does NOT fit the P10c, but the H&K USP9 version fits it well.
Title: Re: What holsters fit the P-10C?
Post by: CzechEm on January 17, 2019, 09:19:35 PM

The G19 version of the Blackhawk Serpa does NOT fit the P10c, but the H&K USP9 version fits it well.

ok, I don't see they have an HK option for this one. May just order one to test anyway
 
https://imgur.com/a/xhOVpkA (https://imgur.com/a/xhOVpkA)
Title: Re: What holsters fit the P-10C?
Post by: Superiorduper on February 07, 2019, 05:05:10 PM
Really love this 'ghost' holster by www.veilsolutions.com with an Ulticlip XL. Most comfortable holster I've tried yet.

(https://thumbs2.imgbox.com/f6/24/0YWLCP84_t.jpeg)

(https://thumbs2.imgbox.com/6b/9a/JO2JQMlw_t.jpeg)
Title: Re: What holsters fit the P-10C?
Post by: Hickeroar on March 11, 2019, 03:28:04 PM
Also just received an Axis from Tier 1 Concealment. Super high quality holster.

https://www.tier1concealed.com/
Title: Re: What holsters fit the P-10C?
Post by: 432bartman on March 30, 2019, 06:42:42 PM
My understanding is that the P10c will fit any holster built for the Glock 19.

Sent from my LG-H900 using Tapatalk

I called Safariland yesterday (03/29/19) and asked about an ALS holster for either my P-10F or P-10C I have that are both milled for red dot sights, and whether their Glock holsters fit the P-10 platform.  The Safariland rep said somebody started putting out bad info about the P-10 guns fitting Glock holsters.  They will only go in 2" and that's it.  As for their ALS holsters for any of the P-10 S,C or F variations, they need requests for 5,000 orders before they will build a mold for one that costs $75,000.00 each.  Hopefully as more P-10's hit the market and demand goes up Safariland will build what we want and need.
Title: What holsters fit the P-10C?
Post by: Abaddon on May 04, 2019, 09:52:05 AM
Just received my Stealthgear owb holster for my CZ P10C tactical with Inforce APLc light. The holster is nice, but a bit on the pricey side and the turn around time was crazy. It took almost 2 months from the day I ordered it, for it to arrive at my house. After 6 weeks I emailed them and asked for an eta for my holster, and they said it would ship out the next day. They didn't ship it out for another week and a half so other than the long wait and high price and I love it. Although they don't have the options listed for the suppressor sights and threaded barrel, a quick email ensured that they could do it.

(https://uploads.tapatalk-cdn.com/20190504/be1ef9125e0fe308cf728e18b806990c.jpg)

(https://uploads.tapatalk-cdn.com/20190504/b60a60f4463c610cb186439b16ede52d.jpg)
Title: Re: What holsters fit the P-10C?
Post by: aflevine on July 17, 2019, 01:54:11 PM
Setting up my new P-10C with a Holosun green-dot (HE507C) and Olight PL-Mini 2 Valkyrie.  I want to carry this at 3:00 canted slightly forwards.  Need some way to spread the force of the slide rear digging into my side while sitting.  So, looking for some kind of design change or padding at the top and around a bit that will spread that force, eliminate the deep bruise, but still allow full access to the grip.  MTR Custom Leather has the A-1+ that I know will work.  To this, they add a memory foam backing and cut the leather to give the slide rear a place to press instead of skin.  It's relatively expensive, but they do great work.  Shooks may have a solution too.  I have a query out to them.

If someone else has solved this, I'd appreciate a recommendation.
Title: Re: What holsters fit the P-10C?
Post by: BigBC on September 10, 2019, 01:42:41 AM
If you're looking for straight kydex with no active retention I use Trex Arms. They have options for OWB, IWB. One thing that I found when I got my P-10C was some glock 19/17 holsters did fit my P-10C but it was a tight fit.

Notably my Safariland ALS 6390-832 w/Sure Fire X300U holster for a Glock 17/22 fits my Glock 19 gen 4 and 5. It also fits my P10C with X300U -A. The retention is still there but the fit is very tight. I did some holster carving to make the draw a little better. I also threw on a Nub Mod from Oregon Trail Defense. That also helped greatly. I've also had friends tell me their Safariland G19 holster fit the P-10C with the same fitment, but were able get the same retention, which is the point of having an ALS holster.
Title: Re: What holsters fit the P-10C?
Post by: twokayaks on September 19, 2019, 09:42:13 AM
New member here and was wondering if anyone knows of any Safariland ALS holsters that work with the P10C? The Safariland ALS holster is all I use for OWB carry for all my HG's so I'm really hoping I can find an ALS that fits a P10c. I also have heard the P10c will fit well in a Glock 19 combat holster, can anyone confirm this as true?

Thanks,
DJager/Art.

I have just tried in a ALS hoster for the M&P and it works surprisingly well.  The retention works and I have no problem drawing from the holster.


RMI63 - What model M&P did you use for the Safariland ALS holster?
Title: Re: What holsters fit the P-10C?
Post by: rwl1955 on September 25, 2019, 10:00:36 AM
I recently ordered a Mitch Rosen OWB and mag holder, they don't make a IWB holster for the P10C.

https://mitchrosen.com/products/holsters/belt-holsters/

Holster and mag carrier are great. holster takes some braking in but that's OK.
Title: Re: What holsters fit the P-10C?
Post by: seang on August 22, 2020, 07:15:58 PM
This Huckleberry Tactical is pretty nice.
https://www.huckleberrytactical.com/light-bearing-owb/

(http://i.imgur.com/yecQpf3.jpg) (https://imgur.com/yecQpf3)
Title: Re: What holsters fit the P-10C?
Post by: TRAK on September 02, 2020, 09:58:38 AM
I have a Winthrop leather OWB for mine.. They have most blue guns including the CZ P-10c. Great product, tight fit and quick shipping.. I think I paid around $40 shipped.


[Do you have a link ??]
Title: Re: What holsters fit the P-10C?
Post by: Hammer Time on September 02, 2020, 10:24:45 AM
My understanding is that the P10c will fit any holster built for the Glock 19.


I called Safariland yesterday (03/29/19) and asked about an ALS holster for either my P-10F or P-10C I have that are both milled for red dot sights, and whether their Glock holsters fit the P-10 platform.  The Safariland rep said somebody started putting out bad info about the P-10 guns fitting Glock holsters.  They will only go in 2" and that's it.  As for their ALS holsters for any of the P-10 S,C or F variations, they need requests for 5,000 orders before they will build a mold for one that costs $75,000.00 each.  Hopefully as more P-10's hit the market and demand goes up Safariland will build what we want and need.

The P-10C will fit in many Glock 19 holsters, but not all.

I went with the JM Custom Kydex AIWB holster for mine, and as with every other JMCK holster I've owned, I'm not disappointed.
Title: Re: What holsters fit the P-10C?
Post by: MSteve on September 09, 2020, 05:14:48 PM
New member here and was wondering if anyone knows of any Safariland ALS holsters that work with the P10C? The Safariland ALS holster is all I use for OWB carry for all my HG's so I'm really hoping I can find an ALS that fits a P10c. I also have heard the P10c will fit well in a Glock 19 combat holster, can anyone confirm this as true?

Thanks,
DJager/Art.

I have just tried in a ALS hoster for the M&P and it works surprisingly well.  The retention works and I have no problem drawing from the holster.


RMI63 - What model M&P did you use for the Safariland ALS holster?

Not sure if this has been posted in this thread yet, but it may he helpful. Not my video.

https://youtu.be/Ey4CDiBJp3g (https://youtu.be/Ey4CDiBJp3g)
Title: Re: What holsters fit the P-10C?
Post by: Hammer Time on October 05, 2020, 07:33:29 PM
New holster from MIE Productions for the P-10C w/Olight PL-Mini 2

(https://imagizer.imageshack.com/v2/800x600q90/923/tO0kpK.jpg)
Title: What holsters fit the P-10C?
Post by: Tactical Panda on October 06, 2020, 12:27:17 AM
Op- Not sure if you’ve picked up a holster or not; however, this guy makes good quality holsters on a budget:

https://instagram.com/steve_civilian_standards?igshid=2pgsllfaczse

https://www.etsy.com/shop/CivilianStandards

Oh btw, I used a G19 holster for my P10C for a little bit.
Title: Re: What holsters fit the P-10C?
Post by: Makman on February 26, 2024, 11:31:01 PM
Vedder Holsers

https://www.vedderholsters.com/cz-p-10-c-holsters/

(https://imagizer.imageshack.com/v2/300x200q180/922/CZlFqZ.jpg)

Vedder adds a concealment claw!

I agree with the Vedder LigthTuck with claw. I have one for my P-10C, G19.5/G45 and a G48.
Title: Re: What holsters fit the P-10C?
Post by: NETim on February 27, 2024, 12:12:31 AM
My Red Hill Tactical OWB holster I use for my Glock 17's works for a P10C.  Fit is a bit loose but it will retain the CZ even when I invert the holster.