CZ urban grey P-01 tactical suppressor ready magazine ???

[LarryGen]

Bought one, only came with one mag for some reason,
want multiple mags, tried cz and Mec-gar none fit right
Was sent one from CZ to replace the missing mag when bought new, that arrived today doesn?t fit
All have a gap at magwell unlike the one factory mag that came in the box with the pistol that fits flush

Searched the internet for hours, no factory mags mentioned at all

Are there not mags available for this pistol???

[M1A4ME]

It was new but only had one magazine? 

A picture of the magazine might help someone figure out if it's the original type supplied by CZ for the pistol or if someone kept those and put a different magazine in the gun to sell it/trade it off.

There are a bunch of different magazines and magazine bases for CZ pistols.

You can buy the magazines that pistol shipped from the factory with.

Here's a good source of CZ magazines.  I've bought from him several times over the last few years.  And Mecgar makes magazines for CZ.  If the magazine says "CZ" on it then it'll cost you about $10 more than the same magazine that says "Mecgar" on it.

http://gregcotellc.com/cart/cz-factory-mecgar-actmag-c-173/?zenid=49druqvaf9qgb81l4lr8c005s2

[LarryGen]

I?m brand new to this forum , trying figure out how to post pics

But yes sir it?s the factory mag I?m positive
When they went to the back to get the box the second mag was missing, I already did the transfer and I wanted the pistol regardless since I have been looking for that specific one

Anyway I sent pics to CZ customer warranty and told them, they immediately said they would send one , I received a SP-01 18 round mag from CZ part number 11152 new in package

Of course it inserts and functions but it is not the proper mag for the P 01 I sent them pictures of , there is a gap at bottom of grip and mag baseplate , unlike the original that came with the pistol

I have 3 different meg car cz mags also now and all seat and function but none fit properly

At this point I just wanna ant the part number to order so I can purchase 3 more correct mags for the pistol

It?s pretty ridiculous actually

[Tok36]

OP, i may be confused here but you listed the "CZ urban grey sp-01 tactical" in your thread title. Then in your second post you stated "not the proper mag for the P 01 I sent them pictures of ".

The CZ SP-01 Tac is a full size CZ pistol, it uses full size magazines.

The CZ P-01 is a compact size CZ pistol, it uses compact size magazines.

What model CZ are you trying to find magazines for?

[LarryGen]

My bad it?s the P-01 I fixed the title

Was typing fast on phone and messed that up but while emailing cz I DID send pics of the correct pistol and while searching to purchase or get the part number I am typing P-01, but when I ordered the p-01 mec gar compact mag it again has that gap, actually 3 different ones with 3 similar but measurement wise different gaps

[M1A4ME]

If it's a P01 suppressor ready pistol.  The Urban Gray model.  The magazines that came with mine were 16 round magazines with a baseplate on them that covers that gap between the bottom of the magazine and the frame.

Here's a picture of two of my Omega P01's (the Urban Gray model is an Omega model CZ).  The top pistol is the Urban Gray model/suppressor ready and has the extended/16 round magazine with the the floor plate that fills the gap.  The bottom pistol is the standard black P01 Omega with a 14 round magazine.



If your pistol is like the top pistol, an Urban Gray P01, the magazines you need are these:

http://gregcotellc.com/cart/cz-factory-mecgar-actmag-c-173/cz-75-compact-9mm-16-rd-factory-extended-magazine-11119-p-1571.html

I've bought several more for my other P01 Omega and my CZ75 Compacts since getting the first two with my Urban Gray P01.

[LarryGen]

The top one is the exact one!


Thank you for the link! So I won?t need to source the larger base plates to fill the gap when using the mags in the link correct?( I was trying to find those and that threw more confusion into my search)

[viking499]

The top one is the exact one!


Thank you for the link! So I won?t need to source the larger base plates to fill the gap when using the mags in the link correct?( I was trying to find those and that threw more confusion into my search)

Do you have the P-01 or SP-01?  The link is for the mags that work in the compact guns.  Those mags will not work in the SP-01.

[viking499]

This here will work for the fullsize.......

http://gregcotellc.com/cart/cz-factory-mecgar-actmag-c-173/cz-75b-cz-75-sp01-cz-shadow-2-19-rd-9mm-2-adapter-mgcz7519afc-p-592.html

http://gregcotellc.com/cart/cz-factory-mecgar-actmag-c-173/cz-75b-cz-85b-cz-75-sp01-cz-shadow-2-17-rd-9mm-mgcz7517afc-p-591.html

[LarryGen]

This here will work for the fullsize.......

http://gregcotellc.com/cart/cz-factory-mecgar-actmag-c-173/cz-75b-cz-75-sp01-cz-shadow-2-19-rd-9mm-2-adapter-mgcz7519afc-p-592.html

http://gregcotellc.com/cart/cz-factory-mecgar-actmag-c-173/cz-75b-cz-85b-cz-75-sp01-cz-shadow-2-17-rd-9mm-mgcz7517afc-p-591.html

It?s the P-01

All set thanks everyone
Not sure why CZ sent the full size mag when they saw the pic that it was the urban grey P-01 but at least I can order the correct mags now
Thanks again