Author Topic: RMR in house FMJ OAL's?  (Read 6316 times)

0 Members and 1 Guest are viewing this topic.

Offline daved20319

  • Full Member
  • ***
  • Posts: 238
Re: RMR in house FMJ OAL's?
« Reply #15 on: November 21, 2018, 12:50:40 PM »
Bullseye is too fast of a powder for the load you made.  I had done a ladder test with bullseye, win231, WST and wsf before. I like win 231 the most for accuracy and felt recoil since I use it for uspsa.

Bullseye is better at lower powder charge if you want to stick with it. Try it at 3.7- 3.9 Gr at 1.104-1.106? OAL.

By the way, what were your chrono speeds?

That's kind of what I was thinking.  Not married to Bullseye, I have some 231 on hand, maybe I'll give that a try next.  BTW, my manuals all seem to show a minimum load at about  4.0 gr. of Bullseye, is it safe to go that low?  Also, I have them loaded fairly long in comparison, 1.112-1.113, think I'll see much difference if I shorten them up some?

No chrono results, not enough time and too bleep cold, I wanted to focus on shooting, not messing around with electronics.  Maybe next spring  ::).  Later, and thanks.

Dave