Author Topic: Ejector Tangfolio 10MM  (Read 977 times)

0 Members and 1 Guest are viewing this topic.

Offline hollywood63

  • Newbie
  • *
  • Posts: 8
Ejector Tangfolio 10MM
« on: July 28, 2019, 04:59:54 PM »
Does anyone have a step by step on how to mod the ejector so the brass doesn't get launched into the next zip code?

Thanks

Offline huskerlrrp

  • Full Member
  • ***
  • Posts: 439
Re: Ejector Tangfolio 10MM
« Reply #1 on: July 28, 2019, 08:14:19 PM »
Just a guess, but you might start with a recoil spring tuner pack to get your set up working as needed, vs. a heavier or lighter extractor spring. Generally, they have less to do with brass ejection.

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8723
Re: Ejector Tangfolio 10MM
« Reply #2 on: July 29, 2019, 03:16:55 PM »
There is a sticky regarding this subject, above.

Only a small pic of the modification is shown, as the original pic was a casualty of the photobucket and hunt101 pic host debacle.

Also, go to a heavier Recoil Spring as huskerlrrp has suggested.  You might also look into the Sprinco recoil reducing Guide Rods.

https://www.sprinco.com/recoil.html

"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"