Holosun on a P07

[sybertag]

Does anyone have a P07 cut for a 407/507c that they could provide pictures of - especially from the rear POV? I'm curious how much overhang there is.

I'd also love to see an example of a 507k on a P07, but I realize those are pretty hard to come by.

[Vinny]

Yeah, I'd like to see this too.

The 407K/507K's are just starting to ship. (I'm still waiting for a 407K). The P-07 has a fairly wide slide compared to a 75 variant, so I doubt there would be much overhang if any. I'm hoping the 'K' models will sit low enough in a milled slot in front of the rear iron that the stock irons will work for BUIS.

They're similar in size to the Shield RMS as shown here on my P-01 where the stock irons lower 1/3 co-witness perfectly. The HS K should be a much better optic than the Shield.

[puddintame]

best i can do for now

[jng1226]

I just posted a topic above with my P-07 with a Swampfox Justice red dot on the milled slide. I have a Holosun 507C V2 green on a FNX-45 and the Swampfox Liberty, while being listed as a 1x27 optic is a bit lower profile IMHO. I'll try to get pictures of them both together so you can see. The Swampfox is an RMR-footprint optic.