Trigger Question

[nixorz]

I have a full pro package installed on my P01, my question is will the CZC Straight DA trigger be compatible with the CGW pro package?

[viking499]

Only if it is made to work with a decocker.  SA only triggers don't mix well with the decocker models.

[Tok36]

   As i understand it the CZC DA/SA Flat Trigger is in essence a short reach DA trigger. So rather than using an upper set scerw to limit the triggers forward travel in DA, the trigger its self bottoms out on the front of the trigger frame hole. As long as the RRK (included in the Pro Package) is installed it should work. Hand fitting may be required to get things working once the Flat Trigger is installed. 

  The CZC Website listing states "Firing Pin Block guns will need Short DA disconnector, 75B extended firing pin and modified firing pin block lifter lever. Decocker guns will need to modify disconnector for decocker action.". I think the second part of this is referring to the removal of one of the disconector wings. Decockers use discos with only one wing. The CGW RRK disco has one wing by design so that it can be used in both safety and decocker models.
https://czcustom.com/cz-parts-all/triggers/czc-straight-da-trigger.html

[anonymouscuban]

I'm running the CZC DA/SA flat trigger in both my SP-01 manual safety models that have the CGW Pro Package. My friend also installed one in his SP-01 manual safety that has the Pro Package.

All dropped in. No fitting required.

Sent from my SM-G930U using Tapatalk

[Stoneface86]

Call CGW and speak to one of the gunsmiths. They’ll tell you what you can do.
Good luck