Is the SSpacer Sear Spacer required with the Adjustable Sear?

[5am]

Hi guys, I have a cz-75 compact. I saw a thread mentioning the spacer for the shadow but couldn't get a definite answer. CGW's sear spacer page says this item is needed but it doesn't mention this item in the adjustable sear page.

https://cajungunworks.com/product/asb/
https://cajungunworks.com/product/s-spacer-sear-spacer/

Now this leads to some confusion... if the spacer is "needed" then why isn't it noted in the sear product description? The hammer notes that the pins are needed (and also sold separately...  ) so this leads me to believe its not actually needed. Can you guys provide some input?

[SI VIS PACEM PARRABELLUM]

 Since you didn't specify which compact you have leading to more confusion I will assume you have a standard 75B compact. If that's the case you can install the adjustable sear without the spacer. That being said unless you are going to be buying a new hammer as well from CGW the sear will be of little benefit.

[Tok36]

   Sear Spacers are required when you are removing the Firing Pin Block from a CZ 75 variant Safety modle with a FPB. They may also come into play if you are installing a narrow B (FPB) model Sear into a CZ Shadow or other non - FPB model CZ.

   In these instances the Sear Spacer takes the place of the removed FPB Lifter Arm. The CGW Adjustable Sear is the same width as a factory CZ 75 variant B (FBP) model Sear. It serves as a direct replacement for the factory Sear with the added benefit of adjustability to easily regain safety lever function in the case that you change other the factory Hammer. 

If you intend on leaving the FPB in your CZ intact a Sear spacer is not required.

[5am]

Thanks for the replies guys.

To specify, its a standard 75b compact, thanks for letting me know about how this could confuse others. And I have the hammer with it too! Excited to install these upgrades.

And thanks for the explanation Tok36, thats 2 for 2 now