CZ P-01 Optic Milling

[TexasMaverick]

I just purchased a CZ 75 P-01 and plan on adding the Holosun 407K to it. I have been researching companies that will mill the slide for this. I have come up with 2 so far and wanted any input pro or con on either of them or any other suggestions.

1) MK3 will mill the slide for $295 - good reviews
https://www.youtube.com/watch?v=Cw2nQxIftHc&list=PLq0hjdgOsFp51A-3a-I5ZeNcqeN8JZ4p9&index=2

2) Primary Machine will mill the slide for $170 - good reviews
https://primarymachine.com/cz-sp-01-p-01-optic-milling/

3) Vulcan Machine Werks for $125 - good reviews
https://vulcanmachinewerks.com/cz-holosun-optics/

4) Wager Machine Works for $135 - good reviews
https://wagermachineworks.com/product/cz75-holosun-407k-507k-footprint-optic-cut/

So far nothing negative on either company.

Since there is quite a bit of difference in pricing I just want to make sure I go with the best company.

Thanks

[Crawl]

Primary Machine and Vulcan Machine both know what they're doing. Primary Machine is the only company I've ever gotten a bad cerakote job from. The paint flaked off within months. The bad cerakote job was quite a number of years ago, so I'm sure they fixed that by now. Vulcan is the best I have encountered, and it's in the same price range as Primary Machine.

[TexasMaverick]

thanks, they are also in Texas closer to me.

[Earl Keese]

Check with Scott at Impact Machine.
https://impactcncmachine.com/cz-p/

[TexasMaverick]

Thanks, will check out Impact Machines as well.

[JMWalker]

Wager has a great reputation for top notch work with quick turnaround. 

I used Impact Machine awhile back with no complaints.  However, I've heard quality has since gone down. 

[sevt_chevelle]

MK3 firearms did some work on my hi power...they won't be getting more.

[Alcoy]

Great experience with Wager Machine Works.

https://wagermachineworks.com/product-category/opticcuts/cz/

[RustyM92]

I used Impact Machine awhile back with no complaints.  However, I've heard quality has since gone down.

They cut and cerakoted a SP-01 slide for me within the last year or two with no complaints. Scott even called me once he finished the job to let me know I'd have to either shorten a factory firing pin block spring or use a CGW spring since the firing pin block channel was modified with the milling and optic in place. I wouldn't hesitate to use them again.