Author Topic: DWX reduced trigger pull  (Read 3875 times)

0 Members and 1 Guest are viewing this topic.

Offline rsvedell

  • Newbie
  • *
  • Posts: 8
DWX reduced trigger pull
« on: October 01, 2023, 02:16:59 AM »
Installed a C&S lightweight sear spring and replaced the mainspring with 15#.

Result is about a 2# trigger pull. Ran my handloaded 124gr xtreme bullets using CCI primers and 4.4gr titegroup. Comes out the barrel at 1177fps. Ran through approximately 100 rounds with no felt recoil at all with no light primer strikes.


« Last Edit: October 01, 2023, 02:23:10 AM by rsvedell »

Offline mark82

  • Newbie
  • *
  • Posts: 5
Re: DWX reduced trigger pull
« Reply #1 on: April 02, 2024, 03:10:13 PM »
What is the OEM weight mainspring?