Author Topic: Safety Lever Installation help  (Read 2687 times)

0 Members and 1 Guest are viewing this topic.

Offline ainokea

  • Jr. Member
  • **
  • Posts: 37
Safety Lever Installation help
« on: June 01, 2009, 10:00:11 PM »
Sorry i tried doing a search on installing the safety lever but couldn't find one.  I can put together the decocker lever easily, little hassle with the spring but only because it's so small. 

But i cannot figure how to install the safety lever.  No real detail instructions that i've found.  Any help in detail or pictures or videos would be greatly appreciated.

Offline Bldgpro

  • Newbie
  • *
  • Posts: 24
Re: Safety Lever Installation help
« Reply #1 on: June 02, 2009, 09:52:56 PM »
Read the posting "The Eagles Have Landed" on page 3 of this forum.  Down towards the bottom of the first page is a pictorial walk through of the process.

Offline pitbull

  • Hero Member
  • *****
  • Posts: 1054
Re: Safety Lever Installation help
« Reply #2 on: June 02, 2009, 10:21:44 PM »
Here's the link to the post discussed above.

http://www.czforumsite.info/index.php?topic=22429.0


Offline ainokea

  • Jr. Member
  • **
  • Posts: 37
Re: Safety Lever Installation help
« Reply #3 on: June 02, 2009, 11:28:05 PM »
Thanks for the replies.  I did read AbyssDncr's before i got the gun, thanks for the write up AbyssDnrcr.  I can take apart and re-install the decocker all day, but i'm still not able to figure out the safety lever. 

I know the spring is not used and only for decocker.  it's the right side that stumps me.  Does it have to angled up in order to install?  Which side goes in first? or does it matter. 

I did get it installed once but what was weird was the control was reversed.  Red dot covered was live and red dot exposed was safe.  Don't ask me how i did it, i couldn't replicate again.

In all honesty most of the time i'll have it with decocker installed but i''d still like to be more proficient with my firearms.