Hi
i was wondering if the pre b sear is now the preferred way of filling the gap compared to using the spacer when the lifter is removed. Also will the spacer be available once more at a later date.
Also inquiring if the 53c tactical rear sight would work on a sp01 with the front tritium sight. Wasn't sure if this was different from the 53b. Is the 53b specific to the shadow or SP01 only?
Also i've been reading about recommended recoil springs for the SP01. I see that anywhere from 11lb to 14 lb is recommended. Will i run into any issues breaking my gun in with 11lb recoil spring. I don't relaod and primarily use ae 115gr or 124gr if available. Local reloads shoot fine in my 75 SA with.
Sorry for all the questions just a bit anxious about buying springs and sights for my new baby. I wasn't sure if the same combo i used in my 75 sa would work in the SP01.
I use a 15lb ms and stock recoil spring with the comp sights and hammer in my 75 SA. Haven't had any problems shooting wwb and AE. Recently i pruchased some reloads and i would get light strikes every so often. Which i think is due to the ammo.
Thanks again for all the info.
