« previous next »
Pages: [1]   Go Down

Author Topic: Which magazine?  (Read 1550 times)

0 Members and 1 Guest are viewing this topic.

Offline ucak2004

  • Newbie
  • *
  • Posts: 8
Which magazine?
« on: February 23, 2020, 11:23:21 AM »
Hi,
I bought new P-10c (c954101) and want to buy extra magazine. There are two different versions (11420 and 11520) .
Anyone know what is the difference? Is it ok to use any of them with my pistol?

Thanks.

SM-G965F cihaz?mdan Tapatalk kullan?larak gönderildi

Logged

Offline m1a_scoutguy

  • Full Member
  • ***
  • Posts: 496
Re: Which magazine?
« Reply #1 on: February 23, 2020, 06:20:50 PM »
I think they are different! Check for sure before you buy,I know I have some early P-10 mags and they will not lock into a NEW P-10,I just tried it last week on my buddies (19 stamped gun) P-10. My mag was for the early/first run ones. I bought a bunch cuz they work in my 07 and said what the heck same mags for two different guns, very cool! I planned on getting a P-10 but have not yet. (CZ really dropped the ball on this deal) Anyways go here, Greg has them marked for which one they will work in. Good luck. http://gregcotellc.com/cart/cz-factory-mecgar-actmag-c-173/
Logged

Offline ucak2004

  • Newbie
  • *
  • Posts: 8
Re: Which magazine?
« Reply #2 on: February 23, 2020, 11:49:33 PM »
Thank  you for your answer but I am not sure again. At http://gregcotellc.com site they only have 11420 but there is a review says "it doesn't have dual mag release cuts, and it is for P07"...
Is there a correlation with the numbers? Like higher number are the new ones?

Thanks.

SM-G965F cihaz?mdan Tapatalk kullan?larak gönderildi

Logged

Offline m1a_scoutguy

  • Full Member
  • ***
  • Posts: 496
Re: Which magazine?
« Reply #3 on: February 24, 2020, 12:08:38 AM »
Quote from: ucak2004 on February 23, 2020, 11:49:33 PM
Thank  you for your answer but I am not sure again. At http://gregcotellc.com site they only have 11420 but there is a review says "it doesn't have dual mag release cuts, and it is for P07"...
Is there a correlation with the numbers? Like higher number are the new ones?

Thanks.

SM-G965F cihaz?mdan Tapatalk kullan?larak gönderildi

I would say this one as long as your in a FREE STATE, I'm not and I forget and always look at the 10rd ones. Read what it says,I think it says it works in Old & New Model!
  CZ P-10 C REVERSE or CZ P-07 9mm 15 RD Factory Magazine 11420
Call him up,I bet he would anwser and fix ya right up !
http://gregcotellc.com/cart/cz-factory-mecgar-actmag-c-173/cz-p10-c-reverse-or-cz-p07-9mm-15-rd-factory-magazine-11420-p-1782.html?zenid=mq3s6m1gkgqvonri7foq278410
Logged

Offline ucak2004

  • Newbie
  • *
  • Posts: 8
Re: Which magazine?
« Reply #4 on: February 24, 2020, 12:29:39 AM »
I am in Turkey it is not easy to call him due to time difference but I'll try. Is there a way to check my mags number? I didn't see any number on it.
And is there any change log or something that tells what is the difference between two versions? They all says fits both on P07 and P10 but it doesn't mention what functions lost like slide lock or amb. Mag relese...

SM-G965F cihaz?mdan Tapatalk kullan?larak gönderildi

Logged

Offline Porcupine

  • Full Member
  • ***
  • Posts: 116
Re: Which magazine?
« Reply #5 on: February 24, 2020, 08:41:32 PM »
This should help:

https://czcustom.com/cz-parts-all/magazines/cz-p-series-magazines.html

11520 has the square notch in the front of the mag.

Is your mag release reversible, or truly ambidextrous?
Logged

Offline ucak2004

  • Newbie
  • *
  • Posts: 8
Re: Which magazine?
« Reply #6 on: February 25, 2020, 02:36:57 PM »
I am not sure if 11520 has the square notch in the front of the mag. I think they have the same notch, but the difference is at the side cuts.
The tecnical support at CZ told me that 11420 is the new one and fit all generation of P10 family.

SM-G965F cihaz?mdan Tapatalk kullan?larak gönderildi

Logged
Pages: [1]   Go Up
« previous next »