Need advice..

[dannyvi]

I have the Rami P with the stainless slide that I carry a lot!so far no sign of the dreaded bulge on the frame! I have been having problems using the hi capacity mags on it. Feeding is not reliable as at times the bullet gets stuck in the mag and won't feed or it does not fully seats! I have changed the mag springs twice and still the same. It has no problem with regular mags which I carry it with and never did this. I have two high capacity mags that does the same thing. I cleaned, put new springs and still happens a lot! Any suggestions? Thanks!

[cntrydawwwg]

Have you checked that the feed lips look the same as the mags that work?

[dannyvi]

I did and looks the same angle or whatever. Sometimes, it does not even get to the top lips.. Is there a chance that because some ammo might be longer gets caught in the mag? I do notice that between different ammos.

[cntrydawwwg]

I would think that if it was too long of OAL, that the ammo wouldn't feed in the CZ.

[dannyvi]

I tried to open up the feed lips a it as the rounds on the small mags tended to stick higher. Looks like same angle now. I'll try again at the range.