Trijicon HD sights for P07/09

[CoGT3]

So I just got a response from my biannual request to Trijicon to start making the HD sights for the CZ P07/09 and CZ75 guns.  I have these sights on 2 HK USP and a Walther PPS.  As a self defense/ fighting sight there are better than any option I have found for any of my P01, P07, or 75 Shadow.   Here was their response:

Good afternoon and thank you for the continued Patronage to Trijicon, unfortunately we have not had any plans come to fruition on making/expanding the CZ sights in the HD line, however we are recording the request for models we do not carry and will forward it on to  the correct department for evaluation. Thank you again and sorry.
 
Regards
KH
Trijicon Technical Support

If there is any interests in these sights for the CZ world we need to politely harass them.  Over in the HK world we went through the same thing and similar responses till they got enough requests to start production.  You can fill out a request at Trijicon's website. 

https://www.trijicon.com/na_en/contact/index.php

Will cross post in P01




Sent from my iPad using Tapatalk HD

[coolcw1987]

I posted and asked them. Ill let you know if they reply.

[GregP220]

I asked a couple weeks ago and got a similar response.

They did state that mine wasn't the first request for these so I found that encouraging.

Ask Ameriglo as well, another great company!

[CoGT3]

Absolutely right about Ameriglo!   Truthfully it's the hiviz front that we really need, we have good blacked out rear sight options with and without tritium. 


Sent from my iPad using Tapatalk HD

[Rutherford2]

I heard the other day (may have been on this forum) that Trijicon can sometimes do custom installation of tritium lamps on existing sights. Perhaps if you have metal factory sights they can drill them out and install the tritium lamps?

From their FAQ page:

"I do not see my model gun on your product list. Do you carry night sights for it?

If your gun is not listed, please contact our recommended specialty shop to do an installation with our tritium lamps. Tooltech Gunsight will be able to quote prices, options and turnaround time. Visit Tooltech's website for contact information by clicking here."

[Bdubbs]

I heard the other day (may have been on this forum) that Trijicon can sometimes do custom installation of tritium lamps on existing sights. Perhaps if you have metal factory sights they can drill them out and install the tritium lamps?

From their FAQ page:

"I do not see my model gun on your product list. Do you carry night sights for it?

If your gun is not listed, please contact our recommended specialty shop to do an installation with our tritium lamps. Tooltech Gunsight will be able to quote prices, options and turnaround time. Visit Tooltech's website for contact information by clicking here."

That's true. I've had it done. The problem is width. If you want a proper front sight tritium vial you need a sight wide enough to accept it. You'll likely need more than 0.127". Otherwise your only option is to have a smaller rear sight tritium vial installed in the front.

[762hurts]

ToolTech installs Trijicon lamps in MANY pistols.

[FiReBReTHa]

hahaha, I also called them and harassed them about the HDs.

one person said because CZ buys their tubes for night sights they cannot make HD sights for it because it conflicts.

[bassinloose]

I requested as well let you know

[clayboy223]

Request sent!