FTF failure to feed P - 07

[DOC 1500]

Reman, but never had any problems with that ammo before. My history with that ammo, if I've had one or two fail to fires in a thousand rounds that will be a lot. I didn't get a chance to measure any of it either.

[wdbutcher]

I've had some issues with their remanufactured ammo. It's not a huge problem, but I would never bet my life on the stuff.

[DOC 1500]

NOOOOOOO ,,,never my carry ammo.
 Carry ammo is federal 147 HST LE.
If you don't carry the best why bother !!!!! Imho
On another note isn't there a thread that talks about the DA roller and the different sizes cgw has and which one to get ?

[SI VIS PACEM PARRABELLUM]

Yes there is a thread about the DA roller here somewhere but unless you are experiencing other issues like the hammer falling from the firing position to half cock when pulling the trigger you probably don't need it. The roller certainly won't cause your ftf issue.

[DOC 1500]

I had a problem at one point with half cocked position, cjw sent me oem lifter arm and disco I lightly polished and clean those up put them in that fix the problem. ( it was because I polish too much maybe) my roller measures .225