« previous next »
Pages: [1]   Go Down

Author Topic: How to know which rings to get? 527  (Read 1358 times)

0 Members and 1 Guest are viewing this topic.

Offline Meathunter

  • Newbie
  • *
  • Posts: 1
How to know which rings to get? 527
« on: June 15, 2017, 04:44:30 PM »
Hello new member here and brand new 527 owner

what a quagmire with what rings to get  :P

I have a choice between two scopes

an old zeiss 8x56

or a new vortex 6-18x44

Some of the warnes are quick release but will either of my quite big scopes fit without removing the rear ironsight?

otherwise just go with these?
http://www.czub.cz/en/eu-eshop/dlouhe-zbrane/montaze/dvoudilna-ocelova-montaz-pro-cz-527.html

tnx
Logged

Offline rdcinhou

  • Hero Member
  • *****
  • Posts: 1817
  • Coat of Arms for Uherský Brod
Re: How to know which rings to get? 527
« Reply #1 on: June 15, 2017, 06:23:06 PM »
Logged
CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D Compact,P01/07/09,P10M/S/C/F(9mm,.45), Phantom,SP01 Tactical,Shadow 2 (Blue,Urban Gray), 82/83/85 PreB, 97BE,97BD,97BDE,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol, PSD

Offline aasbra

  • Jr. Member
  • **
  • Posts: 87
Re: How to know which rings to get? 527
« Reply #2 on: June 17, 2017, 11:09:39 AM »
I use warne rings on all of my 527 rifles because of their lower height for smaller diameter scopes I use (Leupold 2-7 and 3-9 EFR).  Have been happy with them).
Logged

Offline cz75BDShooter

  • Newbie
  • *
  • Posts: 17
Re: How to know which rings to get? 527
« Reply #3 on: June 26, 2017, 08:01:15 PM »
I used this from shop.cz-usa.com:  1" CZ 527 RINGS, 16MM  Product Number: 19002
Fits CZ 527 (7.62x39) perfectly.  Depending on the scope size, you may have to remove the rear iron site.  I left mine as is, since I installed a short scope: Redfield Revolution 2-7x33
Logged
Pages: [1]   Go Up
« previous next »