Author Topic: K2 45 Failure to Feed problem  (Read 3931 times)

0 Members and 1 Guest are viewing this topic.

Offline Wolfgang1952

  • Jr. Member
  • **
  • Posts: 36
  • USN 71-75 SO 75-86
K2 45 Failure to Feed problem
« on: June 29, 2017, 10:25:52 PM »
I?ve got roughly a thousand rounds through my K2 and I am starting to get failure to feed from some of my factory mags.   The thing is the gun and mags aren?t even a year old yet.   Is it the mags, do I need to just junk them or does anyone make replacement followers fo them?   

Wolf
Won't be long till the Progressive PC Leftists will decide that the Eagle is too strong and powerful to be the National bird. They will instead choose the Sparrow for it's meekness!

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8731
Re: K2 45 Failure to Feed problem
« Reply #1 on: June 30, 2017, 01:49:01 AM »
You may need to install newer/heavier Magazine Springs.  I run Wolff +10% Magazine Springs in my .45 Witnesses.
I would install +10% Wolff ParaOrdnance P14 Magazine Springs in your K2-45 Magazines.

Also, remove and inspect your Extractor's Blade for any bending.  While you're at it give the Slide Extractor Channel a good clean.
"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"

Offline inthevalley

  • Full Member
  • ***
  • Posts: 116
Re: K2 45 Failure to Feed problem
« Reply #2 on: June 30, 2017, 04:16:14 PM »
Definitely get the +10% mag spring. I needed to get one for one of my factory mags just to get it to consistently go into slidelock on empty. I think you can find a 3-pack for a decent price if you look around.

Offline Wolfgang1952

  • Jr. Member
  • **
  • Posts: 36
  • USN 71-75 SO 75-86
Re: K2 45 Failure to Feed problem
« Reply #3 on: June 30, 2017, 07:28:55 PM »
I guess I will have to replace some springs.
Won't be long till the Progressive PC Leftists will decide that the Eagle is too strong and powerful to be the National bird. They will instead choose the Sparrow for it's meekness!

Offline Wolfgang1952

  • Jr. Member
  • **
  • Posts: 36
  • USN 71-75 SO 75-86
Re: K2 45 Failure to Feed problem
« Reply #4 on: June 30, 2017, 07:29:53 PM »
Now how do I order the springs from?
Won't be long till the Progressive PC Leftists will decide that the Eagle is too strong and powerful to be the National bird. They will instead choose the Sparrow for it's meekness!

Offline Wolfgang1952

  • Jr. Member
  • **
  • Posts: 36
  • USN 71-75 SO 75-86
Re: K2 45 Failure to Feed problem
« Reply #5 on: June 30, 2017, 08:09:15 PM »
I just ordered a three pack for the P14 from evial bay for 20.99.   Is that a good price or not?
Won't be long till the Progressive PC Leftists will decide that the Eagle is too strong and powerful to be the National bird. They will instead choose the Sparrow for it's meekness!

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8731
Re: K2 45 Failure to Feed problem
« Reply #6 on: July 01, 2017, 02:21:44 AM »
I just ordered a three pack for the P14 from evial bay for 20.99.   Is that a good price or not?

IF that also includes shipping, the price is not bad.  Price without shipping direct from Wolff is $17.29.

https://www.gunsprings.com/PARA-ORDNANCE/P-14%20&%20P-16/cID1/mID48/dID195
"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"

Offline Wolfgang1952

  • Jr. Member
  • **
  • Posts: 36
  • USN 71-75 SO 75-86
Re: K2 45 Failure to Feed problem
« Reply #7 on: July 01, 2017, 04:36:53 PM »
that was with shipping
Won't be long till the Progressive PC Leftists will decide that the Eagle is too strong and powerful to be the National bird. They will instead choose the Sparrow for it's meekness!

Offline Wolfgang1952

  • Jr. Member
  • **
  • Posts: 36
  • USN 71-75 SO 75-86
Re: K2 45 Failure to Feed problem
« Reply #8 on: July 04, 2017, 12:28:49 AM »
How many of you used the Wolff P14 mag springs in there SAR K2 mags?   I got my springs today in the mail.    I set in to rebuild my K2 mags.   I did one, boy what a job to get it to work.   Then after I got it back together and started to reload it.   only 13 rounds ant 14.   I disassembled this mag and put my old spring back in.

Does Wolff make springs for the K2?

 I notice that the SAR K2 mag springs collapse into itself, there tapered.   The Wolff springs are strait, so they don?t collapse as for.
« Last Edit: July 04, 2017, 12:33:55 AM by Wolfgang1952 »
Won't be long till the Progressive PC Leftists will decide that the Eagle is too strong and powerful to be the National bird. They will instead choose the Sparrow for it's meekness!

Offline shakyshoot

  • Jr. Member
  • **
  • Posts: 80
Re: K2 45 Failure to Feed problem
« Reply #9 on: July 04, 2017, 05:42:15 PM »
It's not unusual with a new mag to be hard or impossible to squeeze the last round in.  Typically after 20 or so cycles they'll loosen up to where you can get the specified number loaded. This is a general phenomenon, not specific to the P-14 mags (which I don't have)

Offline Wolfgang1952

  • Jr. Member
  • **
  • Posts: 36
  • USN 71-75 SO 75-86
Re: K2 45 Failure to Feed problem
« Reply #10 on: July 06, 2017, 07:13:28 PM »
I call Met-Gar about springs for the K2 45 mags.   They didn?t even want to talk.    They said they rear made in Italy by met-gar of Italy.   They said to contact Met-Gar in Italy.    Then I called Wolff Springs to see what they had.   he hasn?t even heard of the SAR K2-45.   He didn?t want to talk.

Wolf
Won't be long till the Progressive PC Leftists will decide that the Eagle is too strong and powerful to be the National bird. They will instead choose the Sparrow for it's meekness!