« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: How Is Your P-10 Performing At This Time  (Read 5550 times)

0 Members and 4 Guests are viewing this topic.

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5191
Re: How Is Your P-10 Performing At This Time
« Reply #30 on: February 20, 2018, 06:29:35 AM »
Quote from: Coleman on February 19, 2018, 11:33:56 PM
Man Earl keese thats an unheard of problem with CZs bad accuracy just dont go in the same sentence. Hope you get that all worked out.
I know of another guy with the same issue, but he bought his P10 used and has no warranty of course. I was surprised as well and wasted a good bit of ammo before I gave up on it. If CZ tells me it shoots fine, I'm not sure what I'll do.
Logged

Offline Coleman

  • Full Member
  • ***
  • Posts: 175
Re: How Is Your P-10 Performing At This Time
« Reply #31 on: February 20, 2018, 10:43:10 AM »
Very odd for sure.  You may have mentioned this in previous comments and I missed it but did you check the crown of the barrel and how was the lock up on the barrel in the front and around the chamber did it seem overly loose at all just curious.
Logged

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: How Is Your P-10 Performing At This Time
« Reply #32 on: February 20, 2018, 01:30:09 PM »
We are all anxiously awaiting CZ's response to this issue.
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5191
Re: How Is Your P-10 Performing At This Time
« Reply #33 on: February 20, 2018, 01:34:23 PM »
I talked to Cory today, he said they haven't had a P10 yet that hasn't met accuracy standards, but they would check it. I didn't ask when it would be done.

Sent from my XT1254 using Tapatalk

Logged

Offline pdq5oh

  • Newbie
  • *
  • Posts: 15
Re: How Is Your P-10 Performing At This Time
« Reply #34 on: February 21, 2018, 03:46:52 PM »
My P10 has been running happily for about 500 rounds. The HBI trigger is a definite, must have upgrade.
Logged
Phil

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5191
Re: How Is Your P-10 Performing At This Time
« Reply #35 on: February 21, 2018, 04:15:48 PM »
Quote from: Coleman on February 20, 2018, 10:43:10 AM
Very odd for sure.  You may have mentioned this in previous comments and I missed it but did you check the crown of the barrel and how was the lock up on the barrel in the front and around the chamber did it seem overly loose at all just curious.
Crown looked fine, lock up wasn't noticeably loose.

Sent from my XT1254 using Tapatalk

Logged
Pages: 1 2 [3]   Go Up
« previous next »