cz83 32acp slide

[cob57]

any body have cz 83 in 7.65mm or 32acp that can post or send me picture of bottom of slide i think i have 32 slide need to compare to mind

[larryflew]

Caliber not stamped on the side?

[cob57]

no caliber marked, bottom area where strip round out of mag angled in place being flat like 9x18

[afultz075]

Can you post some pictures of it?

If you measure the opening at the front of the slide for the barrel someone should be able to tell you. .32 barrels have a smaller OD than the .380 or 9x18 barrels.

[cob57]

front of slide measured 0.508 and on my 9x18 0.517 i took pictures but my computer not reading skan disk any more.

[cob57]

   this is slide trying fig. if 7.65mm /32acp

[eastman]

the bottom of the slide on my Israeli surplus CZ83 has an extra machining cut on one side. The area is flat on both slides of the rail on the 7.65 Br version.

As posted above, the barrels are different diameter - bushing was 0.52 on my 9mm Br Short and 0.50 on the 7.65mm