« previous next »
Pages: [1]   Go Down

Author Topic: Random slide lock back  (Read 1686 times)

0 Members and 1 Guest are viewing this topic.

Offline batman4706

  • Newbie
  • *
  • Posts: 19
Random slide lock back
« on: July 18, 2019, 09:06:24 AM »
My P-10F will lock back at random times, what do I need to do to fix it?

Thanks
Jim
Logged

Offline Jav_eee

  • Jr. Member
  • **
  • Posts: 38
Re: Random slide lock back
« Reply #1 on: July 18, 2019, 09:28:45 AM »
My first guess would be to move your thumb.


Sent from my iPhone using Tapatalk Pro
Logged

Offline OpusXJ

  • Full Member
  • ***
  • Posts: 120
Re: Random slide lock back
« Reply #2 on: July 18, 2019, 11:40:24 AM »
You're either riding it with your thumb or the trigger bar is touching the slide stop.
Logged

Offline Wobbly

  • Administrator
  • Hero Member
  • *****
  • Posts: 12786
  • Loves the smell of VihtaVuori in the morning !
Re: Random slide lock back
« Reply #3 on: July 18, 2019, 07:51:00 PM »
Logged
In God we trust; On 'Starting Load' we rely.

Offline batman4706

  • Newbie
  • *
  • Posts: 19
Re: Random slide lock back...fixed
« Reply #4 on: July 23, 2019, 09:27:39 AM »
The problem was the slide lock spring had came out of place. Put it back in the slot and I thin k I'll be GTG>
Logged

Offline earlan357

  • Sr. Member
  • ****
  • Posts: 552
Re: Random slide lock back...fixed
« Reply #5 on: July 24, 2019, 09:07:52 AM »
Quote from: batman4706 on July 23, 2019, 09:27:39 AM
The problem was the slide lock spring had came out of place. Put it back in the slot and I thin k I'll be GTG>

If it popped out once it can pop out again.  My first P10c did that a few times.  My 2nd P10 had more spring tension, so I bent the 1st spring just a few degrees down and away from the ejection port side.
Logged

Offline JohnXLT

  • Newbie
  • *
  • Posts: 5
Re: Random slide lock back...fixed
« Reply #6 on: July 25, 2019, 10:04:01 AM »

If it popped out once it can pop out again.  My first P10c did that a few times.  My 2nd P10 had more spring tension, so I bent the 1st spring just a few degrees down and away from the ejection port side

This.

Happened to me also but only when the pistol was warm/hot. When the pistol was cold there appeared to be enough spring tension. Heated it up with a hair dryer and ever so slightly touched the spring and it popped off the slide stop. Fixed with a very slight outward bend to the spring.
Logged
Pages: [1]   Go Up
« previous next »