Which location is the right one to use center punch? I peen the bottom of the sight, but I feel like this maybe the wrong location because the sight won't sit on top of the slide. Shall I peen at location #1 front and back?
Sent from my iPhone using Tapatalk
The #2 position if anything. You may be just fine with screwing it down in place. Then go shoot it. If he stays put I'd leave it that way first . Put a few 100 round through it If it continues to stay put . Take it out and you'll see where the screw made a slight indentation . Put a dimple there if you'd like, But more importantly put locktite in the hole and in the dovetail . Tighten down that screw and you're done.
We have a tendency to forgot what we did ,when not doing it daily. Or for a living. After looking at yours I remember that's what I did with mine.ALl that dimpling isn't needed. But if you decided you want to : #2
Also Your original rear like everything else on the Sphinx is a bear to get out . Maintain Left to Right out .
After refreshing my Memory looking at yours . I didn't even bother dimpling . I have yet to have any issues
