Author Topic: Mag issues with 180grn .40 Hydroshoks  (Read 2883 times)

0 Members and 1 Guest are viewing this topic.

Unregistered(d)

  • Guest
Mag issues with 180grn .40 Hydroshoks
« on: December 31, 2004, 03:00:00 PM »
(This post is missing and can not be restored)

Unregistered(d)

  • Guest
Mag issues with 180grn .40 Hydroshoks
« Reply #1 on: December 31, 2004, 03:00:00 PM »
(This post is missing and can not be restored)

Offline sanger00verdun

  • Full Member
  • ***
  • Posts: 65
Mag issues with 180grn .40 Hydroshoks
« Reply #2 on: February 27, 2005, 01:19:59 PM »
I have an 85 Compact with 10 round mags in 40.SW.
           
            180 grain Hydroshoks get jammed in both mags. Their uber-wide hollow jackets get caught in the mag catch holes so from round #6 and on, it's very difficult to load and will sometimes not feed the ammo into the gun. The holes are sharp edged and I find little copper shavings at the edges, which means the profile of the bullet is hitting the corner of the mag. I'm going to try and relieve the inside edge of the mag catch holes to alleviate this.
           
            Has anyone else had this issue?