Safety falls off CZ75 Shadow

[RoanokeReloader]

Problem with RH safety falling off repeatedly, even with new safety set.  Safety seems to fit fine.  Slightly loose sear cage with safeties in place.  This is a 75 Shadow, pre-SP-01, has RH detent with spring.  I even put in an aftermarket stronger detent spring with no improvement.  Any thoughts on this? 

[Underwhere]

Problem with RH safety falling off repeatedly, even with new safety set.  Safety seems to fit fine.  Slightly loose sear cage with safeties in place.  This is a 75 Shadow, pre-SP-01, has RH detent with spring.  I even put in an aftermarket stronger detent spring with no improvement.  Any thoughts on this?

Can you post a pic of the RH spring (slide off)

That's odd.

[Tok36]

Is the right side safety detent staying is place or falling out of place?

[RoanokeReloader]

The RH safety detent stays in place. 
Attached photo is with standard detent spring.



Sent from my iPad using Tapatalk

[Stuart]

What safeties are you using?
D style or tumbler?
Photo of them off the gun?

[RoanokeReloader]

D-style, wanting to use this flat safety (new). 



Sent from my iPad using Tapatalk

[Stuart]

thanks

that is a D style safety set.
75 Shadow generally ship with tumbler style safeties and ejector housing.
the ejector housing and the right side detent should be change to D style and non spring RHS detent.
here are parts and links you will want to look at.

RHS detent, non-spring, sku: 10135
https://czcustom.com/cz-sp01-rhs-safety-detent-lock.html

D-style ejector housing, sku: 10023
https://czcustom.com/cz-75-ejector-sear-cage-d-style.html

hope that helps

[RoanokeReloader]

Sweet, thanks, Stuart.  Was wondering about that detent.  Definitely did not know about the housing.  Got this model as it was a bit different from my SP-01s, and enjoying that.


Sent from my iPad using Tapatalk

[Tok36]

This is the first time that i have seen this mix up, i was unaware that one could install the wrong style safety lever set. I did not believe that they would even fit the sear cage/ejector and seat properly.

You also have the option of picking up a set of Spindle style safety levers.

 As a general rule for CZ 75 variants, the short dust cover frames (75B, 75 Shadow) use Spindle style safeties and the full length dust cover frames (SP-01) use a D style safeties.

[RoanokeReloader]

Oh, it’s a second-hand piece from a known competitor and gun-buggerer, LOL.  I’m sorting through a few things with it, but coming along nicely now.