Ejector/Sear Cage for CZ85 Combat

[grumpyoldman]

In a previous post it looks like the slide stop is the only thing different on the 85 Combat. So a SP01/Shadow1/Shadow 2 ejector/sear cage should fit correct.

Thanks,

[M1A4ME]

The ejector is made into the sear cage, right?  On my CZ75 types it is.  I believe there are different sear cages.  I've see them with different numbers stamped into them.  I don't believe I've ever read exactly why they are different.

[grumpyoldman]

Yes the ejector/sear cage are integral. I have since corrected my original post. I know they make a different ejector sear cage for the TS but the SP01/Shadow 1 & 2 are the same part. Just thinking this one will fit the 85 Combat but just want some clarification for anyone who may have experienced this change?

[painter]

I believe all the ambi safety 75 series guns use the same ejector/sear cage.

[CZFanGrrrl]

I recently rebuilt a friend’s 85C.  The hammer (worn down hooks) and the safety (the lobe of which had been incorrectly filed by someone else trying to do a trigger job on it) were malfunctioning.  Trying to get a replacement safety was an issue, it would have taken about 6 months to get a replacement.  What I did was replace the hammer with a new comp hammer and replaced the ejector/sear with one from one of my Shadow 2’s and then used the safety control off of the Shadow 2 as the safety from the 85C only works with the 85C ejector and the 85C ejector doesn’t work with the Shadow 2 safety.  https://youtu.be/fIdzXWZewOs

[Mark-combat]

very nice job

[Tok36]

   There are two main types of Sear Cage/Safety Levers for the CZ 75 variant safety models. The Spindle Style and the D Style. This is because different CZ safety models use different safety lever interface designs. For clarity, when i say safety interface, i am talking about how the left and right side safety levers lock together and work as one part.

The CZ SP-01, SP-01 Shadow and variants use a D style safety lever interface and a D style Sear Cage.

The CZ 75 SA, 75 Stainless, CZ 85 B and 85 Combat use a Spindle style safety interface and a Spindle style sear cage.

Though you can use ether style in any of the listed models, the safety interface style must match the Sear Cage.

There are a few more safety lever options for the D style sear cage, this is why some folks choose to change out the sear cage to a D style so that they can make use of the added options.