« previous next »
Pages: [1]   Go Down

Author Topic: Light bearing Level II Retention Holster for P-07 with RMR  (Read 2725 times)

0 Members and 1 Guest are viewing this topic.

Offline darthbane128

  • Newbie
  • *
  • Posts: 15
Light bearing Level II Retention Holster for P-07 with RMR
« on: September 04, 2018, 02:08:03 AM »
why is it so hard to find a Light bearing Level II Retention Holster for my P-07 with a RMR????

anyone have any suggestions?
Logged

Offline GreyEyes

  • Newbie
  • *
  • Posts: 4
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #1 on: September 04, 2018, 02:23:54 AM »
Try red hill tactical. Expensive, but their stuff is excellent and customer service is very good. They have more level II options than most.
Logged

Offline joedirt199

  • Full Member
  • ***
  • Posts: 378
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #2 on: September 04, 2018, 02:34:18 PM »
The rmr will make hooded holsters hard to find. Something more like a serpa with trigger guard lock.

Kt-mech can get you taken care of and not super expensive. Can even get the holster suede lined to quiet down the kydex
« Last Edit: September 04, 2018, 02:54:21 PM by joedirt199 »
Logged
God created Police so Fireman would have heroes

In God we Trust, everyone else gets searched.

Offline bmo

  • Jr. Member
  • **
  • Posts: 97
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #3 on: September 06, 2018, 12:30:31 PM »
Just saw that exact setup from Shookcustoms' Instagram page the other day. Sounds like it may need to be a custom order for it to fit the RMR though
Logged

Offline Gaigebacca

  • Newbie
  • *
  • Posts: 23
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #4 on: September 06, 2018, 02:14:59 PM »
Quote from: joedirt199 on September 04, 2018, 02:34:18 PM
The rmr will make hooded holsters hard to find. Something more like a serpa with trigger guard lock.

Kt-mech can get you taken care of and not super expensive. Can even get the holster suede lined to quiet down the kydex

I second KT-Mech. Give them a look, they made a lvl 2 retention holster for my P01 w/ PL olight mini and left room for RMR cut. Had it in two weeks. Their holsters are compatible with Safariland mounts too, which I used to put it on a single strap mid-drop and used the Safariland QD system.
Logged

Offline darthbane128

  • Newbie
  • *
  • Posts: 15
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #5 on: September 06, 2018, 03:22:01 PM »
thank you all for the info!  8)
Logged

Offline xcentrk

  • Jr. Member
  • **
  • Posts: 43
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #6 on: September 06, 2018, 08:44:51 PM »
Perfect timing, I was just looking into this today.

I saw the Shooks Customs one but they are not accepting custom orders at this time, but luckily I have a little time before I would need it so will wiat it out unless I find something comparable.
Logged

Offline MarilynMonbro

  • Jr. Member
  • **
  • Posts: 82
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #7 on: September 08, 2018, 04:30:10 PM »
The shook customs rig is quick ship now

http://shookscustoms.com/cz-lvl-ii-duty-holster-duty-owb-quickship/

Sent from my Pixel 2 using Tapatalk
Logged

Offline joedirt199

  • Full Member
  • ***
  • Posts: 378
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #8 on: September 09, 2018, 08:29:11 AM »
Good find on that shook holster. I have both p09 and phantom. If the holster is made for the p09, the phantom will also fit but not the other way around.
Logged
God created Police so Fireman would have heroes

In God we Trust, everyone else gets searched.

Offline darthbane128

  • Newbie
  • *
  • Posts: 15
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #9 on: September 10, 2018, 04:51:00 AM »
Quote from: MarilynMonbro on September 08, 2018, 04:30:10 PM
The shook customs rig is quick ship now

http://shookscustoms.com/cz-lvl-ii-duty-holster-duty-owb-quickship/

Sent from my Pixel 2 using Tapatalk

i just saw this!!
Logged

Offline xcentrk

  • Jr. Member
  • **
  • Posts: 43
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #10 on: September 17, 2018, 07:28:45 PM »
Quote from: MarilynMonbro on September 08, 2018, 04:30:10 PM
The shook customs rig is quick ship now

http://shookscustoms.com/cz-lvl-ii-duty-holster-duty-owb-quickship/

Sent from my Pixel 2 using Tapatalk

Unfortunately the quick ship model will not accommodate an RMR though.
Logged

Offline WestTexan

  • Jr. Member
  • **
  • Posts: 54
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #11 on: September 17, 2018, 07:39:05 PM »
you might check into these guys...I?ve got a couple holsters that should be in the later part of this week. I talked with Jerry seemed like a really nice guy.
https://t5customkydex.com/holsters/
Logged

Offline wisemenofgotham

  • Full Member
  • ***
  • Posts: 108
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #12 on: September 18, 2018, 07:46:09 AM »
RHT or Squared Away Customs
Logged
CZ P-07 Urban Grey 9mm
CGW Pro-Grade, Short Reset, Polished

Wish List:
CZ Shadow 2 Cajunized

Offline inthevalley

  • Full Member
  • ***
  • Posts: 116
Re: Light bearing Level II Retention Holster for P-07 with RMR
« Reply #13 on: October 14, 2020, 10:58:42 PM »
I am on also on a holster search for a LVL2 lightbearing optocs compatible holster for a P09, so I figured I would resurrect this thread with some info:

Midwest Tactical Solutions makes a LVL2 holster, price is reasonable, and they make them for just about any gun/optic/light combo.

Anyone have experience with them?
Logged
Pages: [1]   Go Up
« previous next »